The default_value for the Bt878 V4L2_CID_CONTRAST control is currently
set to 32768. Internally this gets translated to an analog input
circuit gain of 1.19. However, the default gain should be 1.0. This
patch alters the default value to 27648 which corresponds to a gain of
1.0. It also alters the probe routine so that the correct value is
written on board initialisation.
Signed-off-by: Alan McIvor <alan.mcivor@xxxxxxxxxxxx>
---
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index e581b37..2fdfbdc 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -663,7 +663,7 @@ static const struct v4l2_queryctrl bttv_ctls[] = {
.minimum = 0,
.maximum = 65535,
.step = 128,
- .default_value = 32768,
+ .default_value = 27648,
.type = V4L2_CTRL_TYPE_INTEGER,
},{
.id = V4L2_CID_SATURATION,
@@ -4394,7 +4394,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
if (!bttv_tvcards[btv->c.type].no_video) {
bttv_register_video(btv);
bt848_bright(btv,32768);
- bt848_contrast(btv,32768);
+ bt848_contrast(btv,27648);
bt848_hue(btv,32768);
bt848_sat(btv,32768);
audio_mute(btv, 1);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
