Hi, Not the answer I was looking for, But thanks everybody for the clarification. I'll try to register for the wiki and add That information. Yours, Steffen Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx> schrieb: On Sun, Mar 25, 2012 at 4:09 PM, Steffen Neumann <sneumann@xxxxxxxxxxxx> wrote: > Hi, > > I am trying to get a Hauppauge WinTV HVR 930C-HD > to work under Ubuntu 12.04 with the vanilla 3.3 kernel from [1]. > After (manually) loading the em28xx module, > there are no additional messages in kern.log, > only "registered new interface driver em28xx". > > What is odd is that lsusb shows for this card "ID 2040:b130 Hauppauge", > while from [2] I think it should be [2040:1605], > see below for the full lsusb -v output. The card > was purchased this week. > > Do I have a new revision of the 930C ? > I tried "modprobe em28xx card=81", but no change. > Did I miss anything else ? 2040:b130 isn't an em28xx based device. It uses cx231xx. That said, it's not supported under Linux not because of the cx231xx driver but because there is no driver for the demodulator (si2163). Nobody is working on such a driver, and there is no support planned for this device at this time. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
