I have an embedded platform with a Hauppage USB Live video capture
dongle. I recently upgraded to 3.0.12 and now I get no image at all - a
nice pure black is all I get.
I am sure that the dongle is getting a signal. This same hardware used
to work with an older 2.6 kernel.
Partial lsmod:
root@anchor:/etc# lsmod
Module Size Used by Not tainted
saa7115 11296 0
usbvision 48704 0
v4l2_common 4336 2 saa7115,usbvision
videodev 62768 3 saa7115,usbvision,v4l2_common
i2c_core 12240 5
saa7115,usbvision,v4l2_common,videodev,i2c_dev
[ 33.640000] usbcore: registered new interface driver usb-storage
[ 33.644000] USB Mass Storage support registered.
[ 33.708000] Linux video capture interface: v2.00
[ 34.084000] usbvision_probe: Hauppauge WinTV USB Live Pro (NTSC M/N)
found
[ 34.092000] USBVision[0]: registered USBVision Video device video0 [v4l2]
[ 34.100000] usbcore: registered new interface driver usbvision
[ 34.104000] USBVision USB Video Device Driver for Linux : 0.9.10
and this shows up every time the device is opened:
[ 219.772000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a
(usbvision-3-1)
I can't help but think I am missing a module, or firmware, or
something.... But with no messages to go on it's a bit of a mystery.
And yes, I've tried different inputs on the dongle; 0 is the composite
in and 1 is the s-video. I'm using input 0.
--
Honoring our vets.
http://www.bataanmarch.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
