On Lunes, 5 de marzo de 2012 21:42:48 Roger Mårtensson escribió: > Jose Alberto Reguero skrev 2012-03-05 00:22: > > This patch add CI support to az6007 driver. > > > > Signed-off-by: Jose Alberto Reguero<jareguero@xxxxxxxxxxxxxx> > > Since I have this device and have access to a CAM-card and program card > to access the encrypted channels(DVB-C) I thought I should try this > patch and report my findings. First I have to say that I'm just a user > and no developer. > > After managing to include the patch in media_build I do get this in > dmesg when inserting the CAM. > > [ 395.561886] dvb_ca adapter 2: DVB CAM detected and initialised > successfully > > When scanning I can find my channels. > I can watch unencrypted channels without problem even with the CAM inserted. > > When trying a encrypted channel with gnutv I get this: > > $ gnutv -adapter 2 -channels my-channels-v4.conf -out file t.mpg > -timeout 30 TV3 > Using frontend "DRXK DVB-C DVB-T", type DVB-C > status SCVYL | signal 02c7 | snr 00be | ber 00000000 | unc 00000704 | > FE_HAS_LOCK > en50221_tl_handle_sb: Received T_SB for connection not in T_STATE_ACTIVE > from module on slot 00 > > en50221_stdcam_llci_poll: Error reported by stack:-7 > > CAM Application type: 01 > CAM Application manufacturer: cafe > CAM Manufacturer code: babe > CAM Menu string: Conax Conditional Access > CAM supports the following ca system ids: > 0x0b00 > Received new PMT - sending to CAM... > > And the resulting mpeg file is not watchable with mplayer. > > Do you want me to test anything? > -- No. I tested the patch with DVB-T an watch encrypted channels with vdr without problems. I don't know why you can't. I don't know gnutv. Try with other software if you want. Jose Alberto -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
