Em 24-02-2012 07:54, Hans Verkuil escreveu: > On Friday, February 03, 2012 11:06:00 Hans Verkuil wrote: >> Hi all, >> >> This is an implementation of this RFC: >> >> http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg38168.html > > Mauro, > > I'd greatly appreciate it if you can review this API. API Reviewed. > I've verified that it works well with CVT and GTF timings (the code for that > is in the test-timings branch in the git repo below). > > One thing that might change slightly is the description of this flag: > > <entry>V4L2_DV_FL_DIVIDE_CLOCK_BY_1_001</entry> > <entry>CEA-861 specific: only valid for video transmitters, the flag is cleared > by receivers. It is also only valid for formats with the V4L2_DV_FL_NTSC_COMPATIBLE flag > set, for other formats the flag will be cleared by the driver. > > If the application sets this flag, then the pixelclock used to set up the transmitter is > divided by 1.001 to make it compatible with NTSC framerates. If the transmitter > can't generate such frequencies, then the flag will also be cleared. > </entry> > > Currently it is only valid for transmitters, but I've seen newer receivers > that should be able to detect this small difference in pixelclock frequency. A 1000/1001 time shift is generally detected well by the receiver, as the PLL's are generally able to lock. However, depending on how this frequency is used internally at the receiver, it can cause a miss-sample at chroma, causing a weird effect: the vertical borders have the color shifting between to values. This is noticed mostly on high-contrast borders. > I haven't tested (yet) whether they can actually do this, and it would have > to be considered a hint only since this minute pixelclock difference falls > within the CEA861-defined pixelclock variation. But if they can do this, then > that would be a really nice feature. You'll likely be able to notice if they're actually detecting, if you display a standard color bar and look at the borders, and see if the colors are steady at the borders. > Basically I'm looking for a stamp of approval before I continue with this. > > If you are OK with it, then I'll make a final version of this patch series, > and start adding this API to all drivers that currently use the preset API. > Once that's done we can deprecate and eventually remove the preset API. > > But that's a fair amount of work and I don't want to start on that unless I > know you agree with this API. > > Regards, > > Hans > >> >> The goal is that with these additions the existing DV_PRESET API can be >> removed eventually. It's always painful to admit, but that wasn't the best >> API ever :-) >> >> To my dismay I discovered that some of the preset defines were even impossible: >> there are no interlaced 1920x1080i25/29.97/30 formats. >> >> I have been testing this new code with the adv7604 HDMI receiver as used here: >> >> http://git.linuxtv.org/hverkuil/cisco.git/shortlog/refs/heads/test-timings >> >> This is my development/test branch, so the code is a bit messy. >> >> One problem that I always had with the older proposals is that there was no >> easy way to just select a specific standard (e.g. 720p60). By creating the >> linux/v4l2-dv-timings.h header this is now very easy to do, both for drivers >> and applications. >> >> I also took special care on how to distinguish between e.g. 720p60 and 720p59.94. >> See the documentation for more information. >> >> Note that the QUERY_DV_TIMINGS and DV_TIMINGS_CAP ioctls will be marked >> experimental. Particularly the latter ioctl might well change in the future as >> I do not have enough experience to tell whether DV_TIMINGS_CAP is sufficiently >> detailed. >> >> I would like to get some feedback on this approach, just to make sure I don't >> need to start over. >> >> In the meantime I will be working on code to detect CVT and GTF video timings >> since that is needed to verify that that part works correctly as well. >> >> And once everyone agrees to the API, then I will try and add this API to all >> drivers that currently use the preset API. That way there will be a decent >> path forward to eventually remove the preset API (sooner rather than later >> IMHO). >> >> Regards, >> >> Hans >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
