Hi Laurent,
Laurent Pinchart wrote:
> Thanks for the patch.
Thanks for the comments.
> On Monday 20 February 2012 03:57:01 Sakari Ailus wrote:
>> Since media_entity_pipeline_start() now does link validation, it may
>> actually fail. Perform the error handling.
>>
>> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
>> ---
>> drivers/media/video/omap3isp/ispvideo.c | 20 ++++++++++++--------
>> 1 files changed, 12 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/media/video/omap3isp/ispvideo.c
>> b/drivers/media/video/omap3isp/ispvideo.c index c191f13..17522db 100644
>> --- a/drivers/media/video/omap3isp/ispvideo.c
>> +++ b/drivers/media/video/omap3isp/ispvideo.c
>> @@ -993,14 +993,16 @@ isp_video_streamon(struct file *file, void *fh, enum
>> v4l2_buf_type type) */
>> pipe = video->video.entity.pipe
>> ? to_isp_pipeline(&video->video.entity) : &video->pipe;
>> - media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
>> + ret = media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
>> + if (ret < 0)
>> + goto err_media_entity_pipeline_start;
>>
>> /* Verify that the currently configured format matches the output of
>> * the connected subdev.
>> */
>> ret = isp_video_check_format(video, vfh);
>> if (ret < 0)
>> - goto error;
>> + goto err_isp_video_check_format;
>>
>> video->bpl_padding = ret;
>> video->bpl_value = vfh->format.fmt.pix.bytesperline;
>> @@ -1017,7 +1019,7 @@ isp_video_streamon(struct file *file, void *fh, enum
>> v4l2_buf_type type) } else {
>> if (far_end == NULL) {
>> ret = -EPIPE;
>> - goto error;
>> + goto err_isp_video_check_format;
>> }
>>
>> state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
>> @@ -1032,7 +1034,7 @@ isp_video_streamon(struct file *file, void *fh, enum
>> v4l2_buf_type type) /* Validate the pipeline and update its state. */
>> ret = isp_video_validate_pipeline(pipe);
>> if (ret < 0)
>> - goto error;
>> + goto err_isp_video_check_format;
>>
>> pipe->error = false;
>>
>> @@ -1054,7 +1056,7 @@ isp_video_streamon(struct file *file, void *fh, enum
>> v4l2_buf_type type)
>>
>> ret = omap3isp_video_queue_streamon(&vfh->queue);
>> if (ret < 0)
>> - goto error;
>> + goto err_isp_video_check_format;
>>
>> /* In sensor-to-memory mode, the stream can be started synchronously
>> * to the stream on command. In memory-to-memory mode, it will be
>> @@ -1064,19 +1066,21 @@ isp_video_streamon(struct file *file, void *fh, enum
>> v4l2_buf_type type) ret = omap3isp_pipeline_set_stream(pipe,
>> ISP_PIPELINE_STREAM_CONTINUOUS);
>> if (ret < 0)
>> - goto error;
>> + goto err_omap3isp_set_stream;
>> spin_lock_irqsave(&video->queue->irqlock, flags);
>> if (list_empty(&video->dmaqueue))
>> video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
>> spin_unlock_irqrestore(&video->queue->irqlock, flags);
>> }
>>
>> -error:
>> if (ret < 0) {
>> +err_omap3isp_set_stream:
>> omap3isp_video_queue_streamoff(&vfh->queue);
>> +err_isp_video_check_format:
>> + media_entity_pipeline_stop(&video->video.entity);
>> +err_media_entity_pipeline_start:
>> if (video->isp->pdata->set_constraints)
>> video->isp->pdata->set_constraints(video->isp, false);
>> - media_entity_pipeline_stop(&video->video.entity);
>> /* The DMA queue must be emptied here, otherwise CCDC interrupts
>> * that will get triggered the next time the CCDC is powered up
>> * will try to access buffers that might have been freed but
>
> As you add error labels, you can remove the if (ret < 0) test and move error
> handling to a separate block. set_constraint() should be called before
> media_entity_pipeline_stop() in that case. Another option is to leave error
> handling untouched, and to return directly when media_entity_pipeline_start()
> fails (after unlocking the mutex of course).
I've added separate error handling part and moved the constraint
settings patch before this one.
--
Sakari Ailus
sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
