Read signal strength using VAR_P_INBAND and apply FEC preferred values.
Note this does not work on IT9137 devices even with dvb-usb-it9135-01.fw
firmware.
Config read_sl allows switch between read signal strength and signal
level.
Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
---
drivers/media/dvb/dvb-usb/it913x.c | 3 +
drivers/media/dvb/frontends/it913x-fe-priv.h | 5 ++
drivers/media/dvb/frontends/it913x-fe.c | 91 +++++++++++++++++++++++---
drivers/media/dvb/frontends/it913x-fe.h | 4 +
4 files changed, 93 insertions(+), 10 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index cfa415b..3b7b102 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -412,11 +412,13 @@ static int ite_firmware_select(struct usb_device *udev,
case IT9135_V1_FW:
it913x_config.firmware_ver = 1;
it913x_config.adc_x2 = 1;
+ it913x_config.read_slevel = false;
props->firmware = fw_it9135_v1;
break;
case IT9135_V2_FW:
it913x_config.firmware_ver = 1;
it913x_config.adc_x2 = 1;
+ it913x_config.read_slevel = false;
props->firmware = fw_it9135_v2;
switch (it913x_config.tuner_id_0) {
case IT9135_61:
@@ -432,6 +434,7 @@ static int ite_firmware_select(struct usb_device *udev,
default:
it913x_config.firmware_ver = 0;
it913x_config.adc_x2 = 0;
+ it913x_config.read_slevel = true;
props->firmware = fw_it9137;
}
diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h
index 93b086e..eb6fd8a 100644
--- a/drivers/media/dvb/frontends/it913x-fe-priv.h
+++ b/drivers/media/dvb/frontends/it913x-fe-priv.h
@@ -201,6 +201,11 @@ fe_modulation_t fe_con[] = {
QAM_64,
};
+enum {
+ PRIORITY_HIGH = 0, /* High-priority stream */
+ PRIORITY_LOW, /* Low-priority stream */
+};
+
/* Standard demodulator functions */
static struct it913xset set_solo_fe[] = {
{PRO_LINK, GPIOH5_EN, {0x01}, 0x01},
diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c
index ccc36bf..84df03c 100644
--- a/drivers/media/dvb/frontends/it913x-fe.c
+++ b/drivers/media/dvb/frontends/it913x-fe.c
@@ -57,6 +57,7 @@ struct it913x_fe_state {
u32 frequency;
fe_modulation_t constellation;
fe_transmit_mode_t transmission_mode;
+ u8 priority;
u32 crystalFrequency;
u32 adcFrequency;
u8 tuner_type;
@@ -500,19 +501,87 @@ static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
return 0;
}
+/* FEC values based on fe_code_rate_t non supported values 0*/
+int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88};
+int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82};
+int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76};
+
+static int it913x_get_signal_strength(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ u8 code_rate;
+ int ret, temp;
+ u8 lna_gain_os;
+
+ ret = it913x_read_reg_u8(state, VAR_P_INBAND);
+ if (ret < 0)
+ return ret;
+
+ /* VHF/UHF gain offset */
+ if (state->frequency < 300000000)
+ lna_gain_os = 7;
+ else
+ lna_gain_os = 14;
+
+ temp = (ret - 100) - lna_gain_os;
+
+ if (state->priority == PRIORITY_HIGH)
+ code_rate = p->code_rate_HP;
+ else
+ code_rate = p->code_rate_LP;
+
+ if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval))
+ return -EINVAL;
+
+ deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp);
+
+ /* Apply FEC offset values*/
+ switch (p->modulation) {
+ case QPSK:
+ temp -= it913x_qpsk_pval[code_rate];
+ break;
+ case QAM_16:
+ temp -= it913x_16qam_pval[code_rate];
+ break;
+ case QAM_64:
+ temp -= it913x_64qam_pval[code_rate];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (temp < -15)
+ ret = 0;
+ else if ((-15 <= temp) && (temp < 0))
+ ret = (2 * (temp + 15)) / 3;
+ else if ((0 <= temp) && (temp < 20))
+ ret = 4 * temp + 10;
+ else if ((20 <= temp) && (temp < 35))
+ ret = (2 * (temp - 20)) / 3 + 90;
+ else if (temp >= 35)
+ ret = 100;
+
+ deb_info("Signal Strength :%d", ret);
+
+ return ret;
+}
+
static int it913x_fe_read_signal_strength(struct dvb_frontend *fe,
u16 *strength)
{
struct it913x_fe_state *state = fe->demodulator_priv;
- int ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
- /*SIGNAL_LEVEL always returns 100%! so using FE_HAS_SIGNAL as switch*/
- if (state->it913x_status & FE_HAS_SIGNAL)
- ret = (ret * 0xff) / 0x64;
- else
- ret = 0x0;
- ret |= ret << 0x8;
- *strength = ret;
- return 0;
+ int ret = 0;
+ if (state->config->read_slevel) {
+ if (state->it913x_status & FE_HAS_SIGNAL)
+ ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
+ } else
+ ret = it913x_get_signal_strength(fe);
+
+ if (ret >= 0)
+ *strength = (u16)((u32)ret * 0xffff / 0x64);
+
+ return (ret < 0) ? -ENODEV : 0;
}
static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
@@ -606,6 +675,8 @@ static int it913x_fe_get_frontend(struct dvb_frontend *fe)
if (reg[2] < 4)
p->hierarchy = fe_hi[reg[2]];
+ state->priority = reg[5];
+
p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE;
p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE;
@@ -972,5 +1043,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = {
MODULE_DESCRIPTION("it913x Frontend and it9137 tuner");
MODULE_AUTHOR("Malcolm Priestley tvboxspy@xxxxxxxxx");
-MODULE_VERSION("1.13");
+MODULE_VERSION("1.15");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h
index c4a908e..07fa459 100644
--- a/drivers/media/dvb/frontends/it913x-fe.h
+++ b/drivers/media/dvb/frontends/it913x-fe.h
@@ -34,6 +34,8 @@ struct ite_config {
u8 tuner_id_1;
u8 dual_mode;
u8 adf;
+ /* option to read SIGNAL_LEVEL */
+ u8 read_slevel;
};
#if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \
@@ -168,6 +170,8 @@ static inline struct dvb_frontend *it913x_fe_attach(
#define EST_SIGNAL_LEVEL 0x004a
#define FREE_BAND 0x004b
#define SUSPEND_FLAG 0x004c
+#define VAR_P_INBAND 0x00f7
+
/* Build in tuner types */
#define IT9137 0x38
#define IT9135_38 0x38
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
