Hi everyone,
a few days ago I got an PCI-DVB-T and Radio Capture card. Is a quite old
(and cheap) Medion card with an ssa7134 chipset. Unfortunally the card
is not supported by linux (kernel 3.2.5) out-of-the-box. After modprobe
ssa7134 the following message comes by dmesg:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0 2 17 loaded
saa7134 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
saa7134[0]: found at 0000:00:06.0, rev: 1 irq: 17 latency: 32 mmio:
0x4a105000
saa7134: Board is currently unknown. You might try to use the card=<nr>
saa7134: insmod option to specify which board do you have, but this is
saa7134: somewhat risky, as might damage your card. It is better to ask
saa7134: for support at linux-media@xxxxxxxxxxxxxxx.
saa7134: The supported cards are:
saa7134: card=0 -> UNKNOWN/GENERIC
saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001
[...]
saa7134: card=12 -> Medion 7134 16be:0003 16be:5000
[...]
saa7134: card=187 -> Beholder BeholdTV 503 FM 5ace:5030
saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC
[card=0,autodetected]
saa7134[0]: board init: gpio is 10020
saa7134[0]: Huh, no eeprom present (err=-5)?
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
I also used google a litte bit and found some hints to use
modprobe ssa7134 card=12 tuner=63, but it does not look well:
saa7130/34: v4l2 driver version 0 2 17 loaded
saa7134[0]: found at 0000:00:06.0, rev: 1 irq: 17 latency: 32 mmio:
0x4a105000
saa7134[0]: subsystem: 1131:0000, board: Medion 7134 [card=12,insmod
option]
saa7134[0]: board init: gpio is 10020
saa7134[0]: Huh, no eeprom present (err=-5)?
EEPROM read failure
saa7134[0] Tuner type is 63
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
tda9887 10-0043: creating new instance
tda9887 10-0043: tda988[5/6/7] found
tuner 10-0043: Tuner 74 found with type(s) Radio TV.
All bytes are equal. It is not a TEA5767
tuner 10-0060: Tuner -1 found with type(s) Radio TV.
tuner-simple 10-0060: creating new instance
tuner-simple 10-0060: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
dvb_init() allocating 1 frontend
tda10046: chip is not answering. Giving up.
saa7134[0]/dvb: frontend initialization failed
lspci:
Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder [1131:7134] (rev 01)
lspci -d 1131:7134 -vvv
00:06.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors Behold TV 403 FM
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 4a105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: saa7134
Any hints?
Robert
P.S. please also cc to my address
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
