I've got a TBS 6920 PCI-E DVB-S2 card, which explicitly claims Linux compatibility on the box. It works as a satellite receiver, but I get no response from the remote control (trying to read /dev/input/event5). I think this is its entry in /proc/bus/input/devices: I: Bus=0019 Vendor=0000 Product=0006 Version=0000 N: Name="Video Bus" P: Phys=LNXVIDEO/video/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5 U: Uniq= H: Handlers=kbd event5 B: PROP=0 B: EV=3 B: KEY=3e000b00000000 0 0 0 And lspci -v: 03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02) Subsystem: Device 6920:8888 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at fea00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 Is there an extra module I need to load to make it work, or is any work being done on this if it isn't supported yet? Is there anything I can do to help? I'm an experienced C programmer, but not a kernel hacker. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
