Hi, On 2 February 2012 15:01, Fabio Estevam <festevam@xxxxxxxxx> wrote: > On 2/1/12, Guennadi Liakhovetski <g.liakhovetski@xxxxxx> wrote: >> Hello Gonzalo >> >> On Tue, 31 Jan 2012, Fernandez Gonzalo wrote: >> >>> Hi all, >>> >>> I've been working for a while with an iMX25PDK using the BSP provided by >>> Freescale (L2.6.31). The camera driver (V4L2-int) and examples do the >>> job quite well but I need to move my design to a more recent kernel. >>> I've been extensively googling but haven't found any info/examples about >>> how to run the mx2_camera driver in the i.MX25PDK. I'm stuck at this, >>> could someone point me in the right direction? Thank you in advance... >> >> i.MX25PDK is supported in the mainline kernel >> (arch/arm/mach-imx/mach-mx25_3ds.c), but it doesn't attach any cameras. >> Unfortunately, I also don't currently see any i.MX2x platforms in the >> mainline with cameras, so, you have to begin by looking at >> arch/arm/plat-mxc/include/mach/mx2_cam.h, at >> arch/arm/plat-mxc/devices/platform-mx2-camera.c for the >> imx27_add_mx2_camera() function and maybe some i.MX3x or i.MX1 examples. > > Javier has been doing a lot of work on mx2-camera lately. > > Javier, > > Is mach-imx27_visstrim_m10 board connected to a CMOS camera? Do you > have patches for adding camera support to mach-imx27_visstrim_m10? visstrim_m10 is connected to a tvp5150 but it uses the same interface as a CMOS sensor. Let me find some time to send a patch that I have pending in my queue. Then it can be used by Gonzalo as a reference. Regards. -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
