Re: [PATCH 02/15] mm: page_alloc: update migrate type of pages on pcp when isolating

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 30 Jan 2012 12:15:22 +0100, Mel Gorman <mel@xxxxxxxxx> wrote:

On Thu, Jan 26, 2012 at 10:00:44AM +0100, Marek Szyprowski wrote:
From: Michal Nazarewicz <mina86@xxxxxxxxxx>
@@ -139,3 +139,27 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn)
 	spin_unlock_irqrestore(&zone->lock, flags);
 	return ret ? 0 : -EBUSY;
 }
+
+/* must hold zone->lock */
+void update_pcp_isolate_block(unsigned long pfn)
+{
+	unsigned long end_pfn = pfn + pageblock_nr_pages;
+	struct page *page;
+
+	while (pfn < end_pfn) {
+		if (!pfn_valid_within(pfn)) {
+			++pfn;
+			continue;
+		}
+

On Mon, 30 Jan 2012 12:15:22 +0100, Mel Gorman <mel@xxxxxxxxx> wrote:
There is a potential problem here that you need to be aware of.
set_pageblock_migratetype() is called from start_isolate_page_range().
I do not think there is a guarantee that pfn + pageblock_nr_pages is
not in a different block of MAX_ORDER_NR_PAGES. If that is right then
your options are to add a check like this;

if ((pfn & (MAX_ORDER_NR_PAGES - 1)) == 0 && !pfn_valid(pfn))
	break;

or else ensure that end_pfn is always MAX_ORDER_NR_PAGES aligned and in
the same block as pfn and relying on the caller to have called
pfn_valid.

	pfn = round_down(pfn, pageblock_nr_pages);
	end_pfn = pfn + pageblock_nr_pages;

should do the trick as well, right?  move_freepages_block() seem to be
doing the same thing.

+		page = pfn_to_page(pfn);
+		if (PageBuddy(page)) {
+			pfn += 1 << page_order(page);
+		} else if (page_count(page) == 0) {
+			set_page_private(page, MIGRATE_ISOLATE);
+			++pfn;

This is dangerous for two reasons. If the page_count is 0, it could
be because the page is in the process of being freed and is not
necessarily on the per-cpu lists yet and you cannot be sure if the
contents of page->private are important. Second, there is nothing to
prevent another CPU allocating this page from its per-cpu list while
the private field is getting updated from here which might lead to
some interesting races.

I recognise that what you are trying to do is respond to Gilad's
request that you really check if an IPI here is necessary. I think what
you need to do is check if a page with a count of 0 is encountered
and if it is, then a draining of the per-cpu lists is necessary. To
address Gilad's concerns, be sure to only this this once per attempt at
CMA rather than for every page encountered with a count of 0 to avoid a
storm of IPIs.

It's actually more then that.

This is the same issue that I first fixed with a change to free_pcppages_bulk()
function[1].  At the time of positing, you said you'd like me to try and find
a different solution which would not involve paying the price of calling
get_pageblock_migratetype().  Later I also realised that this solution is
not enough.

[1] http://article.gmane.org/gmane.linux.kernel.mm/70314

My next attempt was to run drain PCP list while holding zone->lock[2], but that
quickly proven to be broken approach when Marek started testing it on an SMP
system.

[2] http://article.gmane.org/gmane.linux.kernel.mm/72016

This patch is yet another attempt of solving this old issue.  Even though it has
a potential race condition we came to conclusion that the actual chances of
causing any problems are slim.  Various stress tests did not, in fact, show
the race to be an issue.

The problem is that if a page is on a PCP list, and it's underlaying pageblocks'
migrate type is changed to MIGRATE_ISOLATE, the page (i) will still remain on PCP
list and thus someone can allocate it, and (ii) when removed from PCP list, the
page will be put on freelist of migrate type it had prior to change.

(i) is actually not such a big issue since the next thing that happens after
isolation is migration so all the pages will get freed.  (ii) is actual problem
and if [1] is not an acceptable solution I really don't have a good fix for that.

One things that comes to mind is calling drain_all_pages() prior to acquiring
zone->lock in set_migratetype_isolate().  This is however prone to races since
after the drain and before the zone->lock is acquired, pages might get moved
back to PCP list.

Draining PCP list after acquiring zone->lock is not possible because
smp_call_function_many() cannot be called with interrupts disabled, and changing
spin_lock_irqsave() to spin_lock() followed by local_irq_save() causes a dead
lock (that's what [2] attempted to do).

Any suggestions are welcome!

+		} else {
+			++pfn;
+		}
+	}
+}

--
Best regards,                                         _     _
.o. | Liege of Serenely Enlightened Majesty of      o' \,=./ `o
..o | Computer Science,  Michał “mina86” Nazarewicz    (o o)
ooo +----<email/xmpp: mpn@xxxxxxxxxx>--------------ooO--(_)--Ooo--
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux