Re: [PATCH][media] s5p-g2d: Add HFLIP and VFLIP support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sashin,

Thanks for the patch.

On Monday 30 January 2012 10:58:43 Sachin Kamat wrote:
> This patch adds support for flipping the image horizontally and vertically.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> ---
>  drivers/media/video/s5p-g2d/g2d-hw.c |    5 +++
>  drivers/media/video/s5p-g2d/g2d.c    |   47 +++++++++++++++++++++++++------
>  drivers/media/video/s5p-g2d/g2d.h    |    3 ++
>  3 files changed, 46 insertions(+), 9 deletions(-)

[snip]

> diff --git a/drivers/media/video/s5p-g2d/g2d.c
> b/drivers/media/video/s5p-g2d/g2d.c index febaa67..dea9701 100644
> --- a/drivers/media/video/s5p-g2d/g2d.c
> +++ b/drivers/media/video/s5p-g2d/g2d.c
> @@ -178,6 +178,7 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
>  	struct g2d_ctx *ctx = container_of(ctrl->handler, struct g2d_ctx,
>  								ctrl_handler);
> +
>  	switch (ctrl->id) {
>  	case V4L2_CID_COLORFX:
>  		if (ctrl->val == V4L2_COLORFX_NEGATIVE)
> @@ -185,6 +186,21 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl)
>  		else
>  			ctx->rop = ROP4_COPY;
>  		break;
> +
> +	case V4L2_CID_HFLIP:
> +		if (ctrl->val == 1)
> +			ctx->hflip = 1;
> +		else
> +			ctx->hflip = 0;
> +		break;
> +
> +	case V4L2_CID_VFLIP:
> +		if (ctrl->val == 1)
> +			ctx->vflip = (1 << 1);
> +		else
> +			ctx->vflip = 0;
> +		break;
> +
>  	default:
>  		v4l2_err(&ctx->dev->v4l2_dev, "unknown control\n");
>  		return -EINVAL;
> @@ -200,11 +216,9 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx)
>  {
>  	struct g2d_dev *dev = ctx->dev;
> 
> -	v4l2_ctrl_handler_init(&ctx->ctrl_handler, 1);
> -	if (ctx->ctrl_handler.error) {
> -		v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n");
> -		return ctx->ctrl_handler.error;
> -	}
> +	v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3);
> +	if (ctx->ctrl_handler.error)
> +		goto error;

There's not need to verify ctx->ctrl_handler.error after every call to 
v4l2_ctrl_handler_init() or v4l2_ctrl_new_*(). You can verify it once only 
after initialization all controls.

> 
>  	v4l2_ctrl_new_std_menu(
>  		&ctx->ctrl_handler,
> @@ -214,12 +228,25 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx)
>  		~((1 << V4L2_COLORFX_NONE) | (1 << V4L2_COLORFX_NEGATIVE)),
>  		V4L2_COLORFX_NONE);
> 
> -	if (ctx->ctrl_handler.error) {
> -		v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n");
> -		return ctx->ctrl_handler.error;
> -	}
> +	if (ctx->ctrl_handler.error)
> +		goto error;
> +
> +	v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops,
> +						V4L2_CID_HFLIP, 0, 1, 1, 0);
> +	if (ctx->ctrl_handler.error)
> +		goto error;
> +
> +	v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops,
> +						V4L2_CID_VFLIP, 0, 1, 1, 0);

As a single register controls hflip and vflip, you should group the two 
controls in a cluster.

> +	if (ctx->ctrl_handler.error)
> +		goto error;
> 
>  	return 0;
> +
> +error:
> +	v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n");
> +	return ctx->ctrl_handler.error;
> +
>  }
> 
>  static int g2d_open(struct file *file)
> @@ -564,6 +591,8 @@ static void device_run(void *prv)
>  	g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0));
> 
>  	g2d_set_rop4(dev, ctx->rop);
> +	g2d_set_flip(dev, ctx->hflip | ctx->vflip);
> +

Is this called for every frame, or once at stream start only ? In the later 
case, this means that hflip and vflip won't be changeable during streaming. Is 
that on purpose ?

>  	if (ctx->in.c_width != ctx->out.c_width ||
>  		ctx->in.c_height != ctx->out.c_height)
>  		cmd |= g2d_cmd_stretch(1);
> diff --git a/drivers/media/video/s5p-g2d/g2d.h
> b/drivers/media/video/s5p-g2d/g2d.h index 5eae901..b3be3c8 100644
> --- a/drivers/media/video/s5p-g2d/g2d.h
> +++ b/drivers/media/video/s5p-g2d/g2d.h
> @@ -59,6 +59,8 @@ struct g2d_ctx {
>  	struct g2d_frame	out;
>  	struct v4l2_ctrl_handler ctrl_handler;
>  	u32 rop;
> +	u32 hflip;
> +	u32 vflip;
>  };
> 
>  struct g2d_fmt {
> @@ -77,6 +79,7 @@ void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a);
>  void g2d_start(struct g2d_dev *d);
>  void g2d_clear_int(struct g2d_dev *d);
>  void g2d_set_rop4(struct g2d_dev *d, u32 r);
> +void g2d_set_flip(struct g2d_dev *d, u32 r);
>  u32 g2d_cmd_stretch(u32 e);
>  void g2d_set_cmd(struct g2d_dev *d, u32 c);

-- 
Regards,

Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux