Hi I herbly please for assistance with x3m dvb-t tuner on linux. Let me know if this device has any chance to work on linux. I followed http://linuxtv.org/wiki/index.php/X3m_digital_S.A_HPC2000 without success. lspci output below pdmainframe pd # lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 01:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 06:00.0 PCI bridge: nVidia Corporation PCI express bridge for GTX 295 (rev a3) 07:00.0 PCI bridge: nVidia Corporation PCI express bridge for GTX 295 (rev a3) 07:02.0 PCI bridge: nVidia Corporation PCI express bridge for GTX 295 (rev a3) 08:00.0 3D controller: nVidia Corporation Device 05eb (rev a1) 09:00.0 VGA compatible controller: nVidia Corporation Device 05eb (rev a1) dmesg | grep cx88 below pdmainframe pd # dmesg | grep cx88 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded cx88/0: cx2388x v4l2 driver version 0.0.9 loaded cx88[0]: subsystem: 14f1:8852, board: Leadtek WinFast DTV1800 Hybrid [card=81,insmod option], frontend(s): 1 cx88[0]: TV tuner type 71, Radio tuner type 71 cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw input: cx88 IR (Leadtek WinFast DTV180 as /devices/pci0000:00/0000:00:06.0/0000:01:00.2/rc/rc1/input6 rc1: cx88 IR (Leadtek WinFast DTV180 as /devices/pci0000:00/0000:00:06.0/0000:01:00.2/rc/rc1 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:01:00.2: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 19, latency: 64, mmio: 0xf3000000 cx8800 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 19, latency: 64, mmio: 0xf5000000 cx88/2: cx2388x dvb driver version 0.0.9 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 14f1:8852, board: Leadtek WinFast DTV1800 Hybrid [card=81] cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) cx88_audio 0000:01:00.1: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx88[0]/2: xc3028 attached DVB: registering new adapter (cx88[0]) dmesg | grep xc2 below xc2028 2-0061: i2c output error: rc = -5 (should be 4) xc2028 2-0061: -5 returned from send xc2028 2-0061: Error -22 while loading base firmware i tried a lot of firmwares (from debian, or other sources) - result is the same - stuck -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
