I'm having a tough time getting a Compusa "VC-211A" USB video grabber working under Fedora 16 on a Dell E521. [root@shellder ~]# uname -a Linux shellder.falciani.com 3.1.9-1.fc16.i686 #1 SMP Fri Jan 13 17:14:41 UTC 2012 i686 i686 i386 GNU/Linux Jan 22 15:15:44 shellder kernel: [59072.105044] usb 1-7: new high speed USB device number 5 using ehci_hcd Jan 22 15:15:44 shellder kernel: [59072.220074] usb 1-7: New USB device found, idVendor=eb1a, idProduct=2820 Jan 22 15:15:44 shellder kernel: [59072.220081] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jan 22 15:15:44 shellder kernel: [59072.220656] em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) Jan 22 15:15:44 shellder kernel: [59072.220815] em28xx #0: chip ID is em2820 (or em2710) Jan 22 15:15:44 shellder kernel: [59072.290926] em28xx #0: board has no eeprom Jan 22 15:15:44 shellder kernel: [59072.337170] em28xx #0: found i2c device @ 0x4a [saa7113h] Jan 22 15:15:44 shellder kernel: [59072.370919] em28xx #0: Your board has no unique USB ID. Jan 22 15:15:44 shellder kernel: [59072.370924] em28xx #0: A hint were successfully done, based on i2c devicelist hash. Jan 22 15:15:44 shellder kernel: [59072.370929] em28xx #0: This method is not 100% failproof. Jan 22 15:15:44 shellder kernel: [59072.370934] em28xx #0: If the board were missdetected, please email this log to: Jan 22 15:15:44 shellder kernel: [59072.370938] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> Jan 22 15:15:44 shellder kernel: [59072.370943] em28xx #0: Board detected as EM2860/SAA711X Reference Design Jan 22 15:15:44 shellder kernel: [59072.434031] em28xx #0: Identified as EM2860/SAA711X Reference Design (card=19) Jan 22 15:15:44 shellder kernel: [59072.434037] em28xx #0: Registering snapshot button... Jan 22 15:15:44 shellder kernel: [59072.434165] input: em28xx snapshot button as /devices/pci0000:00/0000:00:0b.1/usb1/1-7/input/input17 Jan 22 15:15:44 shellder kernel: [59072.701150] saa7115 6-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) Jan 22 15:15:45 shellder kernel: [59073.146869] em28xx #0: Config register raw data: 0x00 Jan 22 15:15:45 shellder kernel: [59073.173739] em28xx #0: v4l2 driver version 0.1.3 Jan 22 15:15:45 shellder kernel: [59073.427419] em28xx #0: V4L2 video device registered as video0 Jan 22 15:15:45 shellder mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-7" Jan 22 15:15:45 shellder mtp-probe: bus: 1, device: 5 was not an MTP device UCView and VLC: No video to be captured lsusb (at a later date) Bus 001 Device 005: ID eb1a:2820 eMPIA Technology, Inc. I've tried: modprobe -r em28xx modprobe em28xx card=74 Results: No video UCview modprobe -r em28xx modprobe em28xx card=5 Results: No video UCview modprobe -r em28xx modprobe em28xx card=1 Results: No video UCview Any ideas? I had great hope in the card=74 until I saw that it expected a EM2800 and this seems to be a EM2820. Also, the device looks a lot like this but is marked differently http://www.cooldrives.com/usb-video-vcr-camcorder-analog-video-svideo-adapter.html Any idea on how to select Composite Video input? Thanks -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Mike Falciani http://nj.falciani.com -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
