As recommended by Jason at ITE, the chip version should select firmware.
However, to continue to support IT9137 firmware with different configuration
the driver will use udev->descriptor.idVendor to select the difference
between IT9135 and IT9137.
Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
---
drivers/media/dvb/dvb-usb/it913x.c | 19 +++++++------------
1 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index 654aa7c..59eb23c 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -388,19 +388,12 @@ static int ite_firmware_select(struct usb_device *udev,
{
int sw;
/* auto switch */
- if (le16_to_cpu(udev->descriptor.idProduct) ==
- USB_PID_ITETECH_IT9135)
- sw = IT9135_V1_FW;
- else if (le16_to_cpu(udev->descriptor.idProduct) ==
- USB_PID_ITETECH_IT9135_9005)
+ if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_KWORLD_2)
+ sw = IT9137_FW;
+ else if (it913x_config.chip_ver == 1)
sw = IT9135_V1_FW;
- else if (le16_to_cpu(udev->descriptor.idProduct) ==
- USB_PID_ITETECH_IT9135_9006) {
+ else
sw = IT9135_V2_FW;
- if (it913x_config.tuner_id_0 == 0)
- it913x_config.tuner_id_0 = IT9135_60;
- } else
- sw = IT9137_FW;
/* force switch */
if (dvb_usb_it913x_firmware != IT9135_AUTO)
@@ -416,6 +409,8 @@ static int ite_firmware_select(struct usb_device *udev,
it913x_config.firmware_ver = 1;
it913x_config.adc_x2 = 1;
props->firmware = fw_it9135_v2;
+ if (it913x_config.tuner_id_0 == 0)
+ it913x_config.tuner_id_0 = IT9135_60;
break;
case IT9137_FW:
default:
@@ -842,5 +837,5 @@ module_exit(it913x_module_exit);
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@xxxxxxxxx>");
MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.22");
+MODULE_VERSION("1.23");
MODULE_LICENSE("GPL");
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
