On 06-01-2012 17:16, Mario Ceresa wrote: > Hello Devin, you're right: here it goes! Hi Mario, Plese send it with your Signed-off-by: It is a requirement for merging the patches upstream. > > Best, > > Mario > > On 6 January 2012 19:33, Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx> wrote: >> On Fri, Jan 6, 2012 at 1:29 PM, Mario Ceresa <mrceresa@xxxxxxxxx> wrote: >>> Ok boys: just to let you know that everything works now. >>> >>> thinking that the problem was with the audio input, I noticed that >>> card=64 had an amux while card=19 no. >>> >>> .amux = EM28XX_AMUX_LINE_IN, >>> >>> So I tried this card and modified the mplayer options accordingly: >>> >>> mplayer -tv device=/dev/video0:input=0:norm=PAL:forceaudio:alsa:immediatemode=0:audiorate=48000:amode=1:adevice=hw.2 >>> tv:// >>> >>> notice the forceaudio parameter that reads the audio even if no source >>> is reported from v4l (The same approach with card=19 does not work) >>> >>> The output was a bit slugglish so I switched off pulse audio control >>> of the board (https://bbs.archlinux.org/viewtopic.php?id=114228) and >>> now everything is ok! >>> >>> I hope this will help some lonenly googlers in the future :) >>> >>> Regards, >>> >>> Mario >> >> Hi Mario, >> >> Since you've spent the time to figure out the details of your >> particular hardware, you should really consider submitting a patch to >> the em28xx driver which adds your device's USB ID. That would allow >> others who have that hardware to have it work "out of the box" with no >> need for figuring out the correct "cardid" value through >> experimentation as you had to. >> >> Cheers, >> >> Devin >> >> -- >> Devin J. Heitmueller - Kernel Labs >> http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
