This way, the messages will be tagged with KERN_DEBUG and not clutter
the log from dmesg unless the "debug" module parameter is set.
Signed-off-by: Jonathan Nieder <jrnieder@xxxxxxxxx>
---
drivers/media/dvb/bt8xx/dvb-bt8xx.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index b9d927270318..2f38cca7604b 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -205,7 +205,7 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe)
0x00120000,0x00140000};
#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
- printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+ dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
@@ -216,7 +216,7 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe)
/* decide which VCO to use for the input frequency */
for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++);
- printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+ dprintk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
/* compute the pll divider needed, from Conexant data sheet,
@@ -232,7 +232,7 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe)
((a&0x1f)<<11);
/* everything is shifted left 11 bits to left-align the bits in the
32bit word. Output to the tuner goes MSB-aligned, after all */
- printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
cx24110_pll_write(fe,band);
/* set vga and vca to their widest-band settings, as a precaution.
SetSymbolrate might not be called to set this up */
--
1.7.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
