Hi James, On Friday 06 January 2012 07:24:54 James wrote: [snip] > After googling for the warning, I proceed with the following steps to > make the application on Steve's GNOME-R13 image from this site as it > has all the tools for native-compilation on the Tobi board. > > 1) Inside /usr/src/linux, run "make headers_install ARCH=arm" and my > /usr/include is now populated with lots of files. omap3-isp-live requires recent kernel headers that are not shipped by distributions yet, so you need to install them to some location first. "make headers_install ARCH=arm" should install them to /usr/src/linux/usr/include, not /usr/include. > 2) Inside omap3-isp-live, I ran "make KDIR=/usr/src/linux > CROSS_COMPILE=arm-angstrom-linux-gnueabi-". > > This gave me an error about not finding linux/omap3isp.h file. > Thus, I modified the 2 Makefile and replaced "-I$(KDIR)/usr/include" > with "-I$(KDIR)/include" That's weird. The make headers_install step above should have installed the headers in /usr/src/linux/usr/include, so the makefile should be correct. > Ran "make KDIR=/usr/src/linux > CROSS_COMPILE=arm-angstrom-linux-gnueabi-" again and it compiled > nicely without warnings about using kernel headers from user space. > > Only 3 warnings about > > a) omap3isp.c:271:13: warning: 'omap3_isp_pool_free_buffers' defined > but not used Fixed in the latest version. > b) omap3isp.c:329:15: warning: 'nbufs' may be used uninitialized in > this function Fixed in the latest version as well. > c) subdev.c:49:20: warning: 'pixelcode_to_string' defined but not used I'll fix that, but it's harmless. > Hope I got it right compiling it this time!! (^^)" > > 3) Copied isp/libomap3isp.so to /usr/lib/ directory when this message > appeared when I ran ./live -h > > "./live: error while loading shared libraries: libomap3isp.so: cannot > open shared object file: No such file or directory" > > 4) Ran ./live again and got this error message "unable to find video > output device" That should be fixed in the latest version. Could you please upgrade ? > overo: setting xclk to 25000000 hz > Device /dev/videovero: setting xclk to 0 hz > o6 opened: OMAP3 ISP resizer output (media). > viewfinder configured for 2011 1024x768 > error: unable to find video output device > > The output of the DVI goes 'blue' and nothing shown. > What is missing? > > lsmod shows the list of modules loaded. > > Module Size Used by > fuse 59943 3 > bufferclass_ti 4976 0 > omaplfb 8025 0 > pvrsrvkm 146868 2 bufferclass_ti,omaplfb > mt9v032 5958 1 > omap3_isp 104303 0 > v4l2_common 8543 2 mt9v032,omap3_isp > videodev 78271 3 mt9v032,omap3_isp,v4l2_common > libertas_sdio 14871 0 > media 11885 3 mt9v032,omap3_isp,videodev > libertas 92472 1 libertas_sdio > cfg80211 157222 1 libertas > lib80211 5291 1 libertas > firmware_class 6269 2 libertas_sdio,libertas > ads7846 10331 0 > ipv6 226224 18 > > 5) Ran ./snapshot and it continues till Ctrl+C. > Does it has any output others then those messages? > > Many thanks in adv. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
