[PATCHv2 61/94] [media] tda10086: convert set_fontend to use DVBv5 parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
 drivers/media/dvb/frontends/tda10086.c |   46 ++++++++++++++++----------------
 1 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index 8501100..81fa57b 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -267,7 +267,7 @@ static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minic
 }
 
 static int tda10086_set_inversion(struct tda10086_state *state,
-				  struct dvb_frontend_parameters *fe_params)
+				  struct dtv_frontend_properties *fe_params)
 {
 	u8 invval = 0x80;
 
@@ -292,7 +292,7 @@ static int tda10086_set_inversion(struct tda10086_state *state,
 }
 
 static int tda10086_set_symbol_rate(struct tda10086_state *state,
-				    struct dvb_frontend_parameters *fe_params)
+				    struct dtv_frontend_properties *fe_params)
 {
 	u8 dfn = 0;
 	u8 afs = 0;
@@ -303,7 +303,7 @@ static int tda10086_set_symbol_rate(struct tda10086_state *state,
 	u32 tmp;
 	u32 bdr;
 	u32 bdri;
-	u32 symbol_rate = fe_params->u.qpsk.symbol_rate;
+	u32 symbol_rate = fe_params->symbol_rate;
 
 	dprintk ("%s %i\n", __func__, symbol_rate);
 
@@ -367,13 +367,13 @@ static int tda10086_set_symbol_rate(struct tda10086_state *state,
 }
 
 static int tda10086_set_fec(struct tda10086_state *state,
-			    struct dvb_frontend_parameters *fe_params)
+			    struct dtv_frontend_properties *fe_params)
 {
 	u8 fecval;
 
-	dprintk ("%s %i\n", __func__, fe_params->u.qpsk.fec_inner);
+	dprintk ("%s %i\n", __func__, fe_params->fec_inner);
 
-	switch(fe_params->u.qpsk.fec_inner) {
+	switch(fe_params->fec_inner) {
 	case FEC_1_2:
 		fecval = 0x00;
 		break;
@@ -409,9 +409,9 @@ static int tda10086_set_fec(struct tda10086_state *state,
 	return 0;
 }
 
-static int tda10086_set_frontend(struct dvb_frontend* fe,
-				 struct dvb_frontend_parameters *fe_params)
+static int tda10086_set_frontend(struct dvb_frontend* fe)
 {
+	struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
 	struct tda10086_state *state = fe->demodulator_priv;
 	int ret;
 	u32 freq = 0;
@@ -452,12 +452,12 @@ static int tda10086_set_frontend(struct dvb_frontend* fe,
 	tda10086_write_mask(state, 0x10, 0x40, 0x40);
 	tda10086_write_mask(state, 0x00, 0x01, 0x00);
 
-	state->symbol_rate = fe_params->u.qpsk.symbol_rate;
+	state->symbol_rate = fe_params->symbol_rate;
 	state->frequency = fe_params->frequency;
 	return 0;
 }
 
-static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fe_params)
+static int tda10086_get_frontend(struct dvb_frontend* fe, struct dtv_frontend_properties *fe_params)
 {
 	struct tda10086_state* state = fe->demodulator_priv;
 	u8 val;
@@ -467,7 +467,7 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa
 	dprintk ("%s\n", __func__);
 
 	/* check for invalid symbol rate */
-	if (fe_params->u.qpsk.symbol_rate < 500000)
+	if (fe_params->symbol_rate < 500000)
 		return -EINVAL;
 
 	/* calculate the updated frequency (note: we convert from Hz->kHz) */
@@ -516,34 +516,34 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa
 		tmp |= 0xffffff00;
 	tmp = (tmp * 480 * (1<<1)) / 128;
 	tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000);
-	fe_params->u.qpsk.symbol_rate = state->symbol_rate + tmp;
+	fe_params->symbol_rate = state->symbol_rate + tmp;
 
 	/* the FEC */
 	val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4;
 	switch(val) {
 	case 0x00:
-		fe_params->u.qpsk.fec_inner = FEC_1_2;
+		fe_params->fec_inner = FEC_1_2;
 		break;
 	case 0x01:
-		fe_params->u.qpsk.fec_inner = FEC_2_3;
+		fe_params->fec_inner = FEC_2_3;
 		break;
 	case 0x02:
-		fe_params->u.qpsk.fec_inner = FEC_3_4;
+		fe_params->fec_inner = FEC_3_4;
 		break;
 	case 0x03:
-		fe_params->u.qpsk.fec_inner = FEC_4_5;
+		fe_params->fec_inner = FEC_4_5;
 		break;
 	case 0x04:
-		fe_params->u.qpsk.fec_inner = FEC_5_6;
+		fe_params->fec_inner = FEC_5_6;
 		break;
 	case 0x05:
-		fe_params->u.qpsk.fec_inner = FEC_6_7;
+		fe_params->fec_inner = FEC_6_7;
 		break;
 	case 0x06:
-		fe_params->u.qpsk.fec_inner = FEC_7_8;
+		fe_params->fec_inner = FEC_7_8;
 		break;
 	case 0x07:
-		fe_params->u.qpsk.fec_inner = FEC_8_9;
+		fe_params->fec_inner = FEC_8_9;
 		break;
 	}
 
@@ -701,7 +701,7 @@ static void tda10086_release(struct dvb_frontend* fe)
 }
 
 static struct dvb_frontend_ops tda10086_ops = {
-
+	.delsys = { SYS_DVBS },
 	.info = {
 		.name     = "Philips TDA10086 DVB-S",
 		.type     = FE_QPSK,
@@ -722,8 +722,8 @@ static struct dvb_frontend_ops tda10086_ops = {
 	.sleep = tda10086_sleep,
 	.i2c_gate_ctrl = tda10086_i2c_gate_ctrl,
 
-	.set_frontend_legacy = tda10086_set_frontend,
-	.get_frontend_legacy = tda10086_get_frontend,
+	.set_frontend = tda10086_set_frontend,
+	.get_frontend = tda10086_get_frontend,
 	.get_tune_settings = tda10086_get_tune_settings,
 
 	.read_status = tda10086_read_status,
-- 
1.7.8.352.g876a6

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux