On 07-12-2011 11:47, Gianluca Gennari wrote:
Il 07/12/2011 14:12, Mauro Carvalho Chehab ha scritto:
On 06-12-2011 12:33, Gianluca Gennari wrote:
Hi All,
I have a Terratec Cinergy Hybrid T USB XS stick (USB 0ccd:0042).
This device is made of the following components:
- Empiatech em2880 USB bridge;
- Zarlink zl10353 demodulator;
- Xceive XC3028 tuner;
For this device, the ZARLINK456 define is set to true so it is using the
firmwares with type D2633 for the XC3028 tuner.
I found out that:
1) the DTV7 firmware works fine in VHF band (bw=7MHz);
2) the DTV8 firmware works fine in UHF band (bw=8MHz);
3) the DTV78 firmware works fine in UHF band (bw=8MHz) but it doesn not
work at all in VHF band (bw=7MHz);
In fact, when the DTV78 firmware is loaded and I try to tune a VHF
channel, the frequency lock is ciclically acquired for a second and
immediately lost.
So the proposed patch forces a reload of the DTV7 firmware every time a
7MHz channel is requested.
The only drawback is that channel change from VHF to UHF or viceversa is
slightly slower.
Devices using the D2620 firmwares are unaffected.
Hi Gianluca,
The issues with firmware DTV78 x DTV7/DTV8 are old. No matter what we do,
we end by having troubles, as the issue is Country-dependent. For example,
Australia requires a different firmware than Germany, due to the
differences
on the VHF/UHF bands.
I prefer if you could work into a patch that would add some modprobe
parameter
to disable the current "autodetection" way, allowing to override the
firmware
used for VHF and UHF.
Thanks,
Mauro
Hi Mauro,
thanks for the feedback. Unfortunately I do not have any info on which
kind of firmware is needed on other parts of the world. All I know is
what is happening here in Italy, and what I can understand reading the
code. I suppose my findings can be extended to the rest of Europe, and
maybe Africa and Middle-East.
Even in Europe, there are some differences.
Can you provide a reference about problems in other continents like
Australia?
All I know is from the constant reports at the ML from users. We used to
have a developer in Australia, but he moved away, and it seems that he lost
interest on DVB development, as we were unable to contact him ever since.
Do you think a simple module parameters that allows to enable/disable
the usage of the DTV78 firmware would do the trick?
Perhaps one or two module parameters to allow forcing a certain firmware for
VHF and UHF.
Eventually, do you agree that the default solution should be to DISABLE
DTV78 firmware, since this seems to be the more robust solution, and let
the user enable it through the kernel parameter if it is working in his
country? Or do you prefer the other way around, so by default DTV78
firmware is enabled, and users with problems can disable it through the
kernel module parameter?
AFAIK, DTV78 should be used in Spain and in Germany. Changing the current
default doesn't look a good idea, as it will cause regressions, if the new
way is not backward-compatible.
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
