This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Tested so far on omap4430sdp w/ ES2.1 GP & w/ ES2.2 EMU. Check newly added Documentation/video4linux/omap4_camera.txt for details. Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx> --- Documentation/video4linux/omap4_camera.txt | 60 ++ arch/arm/plat-omap/include/plat/omap4-iss.h | 42 + drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 1 + drivers/media/video/omap4iss/Makefile | 6 + drivers/media/video/omap4iss/iss.c | 1179 ++++++++++++++++++++++++ drivers/media/video/omap4iss/iss.h | 133 +++ drivers/media/video/omap4iss/iss_csi2.c | 1324 +++++++++++++++++++++++++++ drivers/media/video/omap4iss/iss_csi2.h | 166 ++++ drivers/media/video/omap4iss/iss_csiphy.c | 215 +++++ drivers/media/video/omap4iss/iss_csiphy.h | 69 ++ drivers/media/video/omap4iss/iss_regs.h | 238 +++++ drivers/media/video/omap4iss/iss_video.c | 1192 ++++++++++++++++++++++++ drivers/media/video/omap4iss/iss_video.h | 205 +++++ 14 files changed, 4843 insertions(+), 0 deletions(-) create mode 100644 Documentation/video4linux/omap4_camera.txt create mode 100644 arch/arm/plat-omap/include/plat/omap4-iss.h create mode 100644 drivers/media/video/omap4iss/Makefile create mode 100644 drivers/media/video/omap4iss/iss.c create mode 100644 drivers/media/video/omap4iss/iss.h create mode 100644 drivers/media/video/omap4iss/iss_csi2.c create mode 100644 drivers/media/video/omap4iss/iss_csi2.h create mode 100644 drivers/media/video/omap4iss/iss_csiphy.c create mode 100644 drivers/media/video/omap4iss/iss_csiphy.h create mode 100644 drivers/media/video/omap4iss/iss_regs.h create mode 100644 drivers/media/video/omap4iss/iss_video.c create mode 100644 drivers/media/video/omap4iss/iss_video.h diff --git a/Documentation/video4linux/omap4_camera.txt b/Documentation/video4linux/omap4_camera.txt new file mode 100644 index 0000000..a60c80f --- /dev/null +++ b/Documentation/video4linux/omap4_camera.txt @@ -0,0 +1,60 @@ + OMAP4 ISS Driver + ================ + +Introduction +------------ + +The OMAP44XX family of chips contains the Imaging SubSystem (a.k.a. ISS), +Which contains several components that can be categorized in 3 big groups: + +- Interfaces (2 Interfaces: CSI2-A & CSI2-B/CCP2) +- ISP (Image Signal Processor) +- SIMCOP (Still Image Coprocessor) + +For more information, please look in [1] for latest version of: + "OMAP4430 Multimedia Device Silicon Revision 2.x" + +As of Revision L, the ISS is described in detail in section 8. + +This driver is supporting _only_ the CSI2-A interface for now. + +It makes use of the Media Controller framework [2], and inherited most of the +code from OMAP3 ISP driver (found under drivers/media/video/omap3isp/*), except +that it doesn't need an IOMMU now for ISS buffers memory mapping. + +Supports usage of MMAP buffers only (for now). + +IMPORTANT: It is recommended to have this patchset: + Contiguous Memory Allocator (v15) [3]. + +Tested platforms +---------------- + +- OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in + which only the last one is supported, outputting YUV422 frames). + +- PandaBoard, Rev. A2, w/ OMAP4430 ES2.1 GP & OV adapter board, tested with + following sensors: + * OV5640 + * OV5650 + +- Tested on mainline kernel: + + http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=summary + + Tag: v3.0 (commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe) + +File list +--------- +drivers/media/video/omap4iss/ + +References +---------- + +[1] http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?navigationId=12037&templateId=6123#62 +[2] http://lwn.net/Articles/420485/ +[3] http://lwn.net/Articles/455801/ +-- +Author: Sergio Aguirre <saaguirre@xxxxxx> +Copyright (C) 2011, Texas Instruments + diff --git a/arch/arm/plat-omap/include/plat/omap4-iss.h b/arch/arm/plat-omap/include/plat/omap4-iss.h new file mode 100644 index 0000000..3a1c6b6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap4-iss.h @@ -0,0 +1,42 @@ +#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H +#define ARCH_ARM_PLAT_OMAP4_ISS_H + +#include <linux/i2c.h> + +struct iss_device; + +enum iss_interface_type { + ISS_INTERFACE_CSI2A_PHY1, +}; + +/** + * struct iss_csi2_platform_data - CSI2 interface platform data + * @crc: Enable the cyclic redundancy check + * @vpclk_div: Video port output clock control + */ +struct iss_csi2_platform_data { + unsigned crc:1; + unsigned vpclk_div:2; +}; + +struct iss_subdev_i2c_board_info { + struct i2c_board_info *board_info; + int i2c_adapter_id; +}; + +struct iss_v4l2_subdevs_group { + struct iss_subdev_i2c_board_info *subdevs; + enum iss_interface_type interface; + union { + struct iss_csi2_platform_data csi2; + } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ +}; + +struct iss_platform_data { + struct iss_v4l2_subdevs_group *subdevs; + void (*set_constraints)(struct iss_device *iss, bool enable); +}; + +extern int omap4_init_camera(struct iss_platform_data *pdata, + struct omap_board_data *bdata); +#endif diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index b303a3f..ae2a99d 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -796,6 +796,19 @@ config VIDEO_OMAP3_DEBUG ---help--- Enable debug messages on OMAP 3 camera controller driver. +config VIDEO_OMAP4 + tristate "OMAP 4 Camera support (EXPERIMENTAL)" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP4 && EXPERIMENTAL + select VIDEOBUF2_DMA_CONTIG + ---help--- + Driver for an OMAP 4 ISS controller. + +config VIDEO_OMAP4_DEBUG + bool "OMAP 4 Camera debug messages" + depends on VIDEO_OMAP4 + ---help--- + Enable debug messages on OMAP 4 ISS controller driver. + config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 117f9c4..f02a4c4 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -140,6 +140,7 @@ obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ +obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_USB_ZR364XX) += zr364xx.o obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o diff --git a/drivers/media/video/omap4iss/Makefile b/drivers/media/video/omap4iss/Makefile new file mode 100644 index 0000000..1d3b0a7 --- /dev/null +++ b/drivers/media/video/omap4iss/Makefile @@ -0,0 +1,6 @@ +# Makefile for OMAP4 ISS driver + +omap4-iss-objs += \ + iss.o iss_csi2.o iss_csiphy.o iss_video.o + +obj-$(CONFIG_VIDEO_OMAP4) += omap4-iss.o diff --git a/drivers/media/video/omap4iss/iss.c b/drivers/media/video/omap4iss/iss.c new file mode 100644 index 0000000..255738b --- /dev/null +++ b/drivers/media/video/omap4iss/iss.c @@ -0,0 +1,1179 @@ +/* + * V4L2 Driver for OMAP4 ISS + * + * Copyright (C) 2011, Texas Instruments + * + * Author: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/vmalloc.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> + +#include "iss.h" +#include "iss_regs.h" + +static void iss_save_ctx(struct iss_device *iss); + +static void iss_restore_ctx(struct iss_device *iss); + +/* Structure for saving/restoring ISS module registers */ +static struct iss_reg iss_reg_list[] = { + {OMAP4_ISS_MEM_TOP, ISS_HL_SYSCONFIG, 0}, + {OMAP4_ISS_MEM_TOP, ISS_CTRL, 0}, + {OMAP4_ISS_MEM_TOP, ISS_CLKCTRL, 0}, + {0, ISS_TOK_TERM, 0} +}; + +/* + * omap4iss_flush - Post pending L3 bus writes by doing a register readback + * @iss: OMAP4 ISS device + * + * In order to force posting of pending writes, we need to write and + * readback the same register, in this case the revision register. + * + * See this link for reference: + * http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg08149.html + */ +void omap4iss_flush(struct iss_device *iss) +{ + writel(0, iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_REVISION); + readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_REVISION); +} + +/* + * iss_enable_interrupts - Enable ISS interrupts. + * @iss: OMAP4 ISS device + */ +static void iss_enable_interrupts(struct iss_device *iss) +{ + static const u32 irq = ISS_HL_IRQ_CSIA; + + /* Enable HL interrupts */ + writel(irq, iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_IRQSTATUS_5); + writel(irq, iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_IRQENABLE_5_SET); +} + +/* + * iss_disable_interrupts - Disable ISS interrupts. + * @iss: OMAP4 ISS device + */ +static void iss_disable_interrupts(struct iss_device *iss) +{ + writel(-1, iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_IRQENABLE_5_CLR); +} + +static inline void iss_isr_dbg(struct iss_device *iss, u32 irqstatus) +{ + static const char *name[] = { + "ISP_IRQ0", + "ISP_IRQ1", + "ISP_IRQ2", + "ISP_IRQ3", + "CSIA_IRQ", + "CSIB_IRQ", + "CCP2_IRQ0", + "CCP2_IRQ1", + "CCP2_IRQ2", + "CCP2_IRQ3", + "CBUFF_IRQ", + "BTE_IRQ", + "SIMCOP_IRQ0", + "SIMCOP_IRQ1", + "SIMCOP_IRQ2", + "SIMCOP_IRQ3", + "CCP2_IRQ8", + "HS_VS_IRQ", + "res18", + "res19", + "res20", + "res21", + "res22", + "res23", + "res24", + "res25", + "res26", + "res27", + "res28", + "res29", + "res30", + "res31", + }; + int i; + + dev_dbg(iss->dev, "ISS IRQ: "); + + for (i = 0; i < ARRAY_SIZE(name); i++) { + if ((1 << i) & irqstatus) + printk(KERN_CONT "%s ", name[i]); + } + printk(KERN_CONT "\n"); +} + +/* + * iss_isr - Interrupt Service Routine for ISS module. + * @irq: Not used currently. + * @_iss: Pointer to the OMAP4 ISS device + * + * Handles the corresponding callback if plugged in. + * + * Returns IRQ_HANDLED when IRQ was correctly handled, or IRQ_NONE when the + * IRQ wasn't handled. + */ +static irqreturn_t iss_isr(int irq, void *_iss) +{ + struct iss_device *iss = _iss; + u32 irqstatus; + + irqstatus = readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_IRQSTATUS_5); + writel(irqstatus, iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_IRQSTATUS_5); + + if (irqstatus & ISS_HL_IRQ_CSIA) + omap4iss_csi2_isr(&iss->csi2a); + + omap4iss_flush(iss); + +#if defined(DEBUG) && defined(ISS_ISR_DEBUG) + iss_isr_dbg(iss, irqstatus); +#endif + + return IRQ_HANDLED; +} + +/* ----------------------------------------------------------------------------- + * Pipeline power management + * + * Entities must be powered up when part of a pipeline that contains at least + * one open video device node. + * + * To achieve this use the entity use_count field to track the number of users. + * For entities corresponding to video device nodes the use_count field stores + * the users count of the node. For entities corresponding to subdevs the + * use_count field stores the total number of users of all video device nodes + * in the pipeline. + * + * The omap4iss_pipeline_pm_use() function must be called in the open() and + * close() handlers of video device nodes. It increments or decrements the use + * count of all subdev entities in the pipeline. + * + * To react to link management on powered pipelines, the link setup notification + * callback updates the use count of all entities in the source and sink sides + * of the link. + */ + +/* + * iss_pipeline_pm_use_count - Count the number of users of a pipeline + * @entity: The entity + * + * Return the total number of users of all video device nodes in the pipeline. + */ +static int iss_pipeline_pm_use_count(struct media_entity *entity) +{ + struct media_entity_graph graph; + int use = 0; + + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE) + use += entity->use_count; + } + + return use; +} + +/* + * iss_pipeline_pm_power_one - Apply power change to an entity + * @entity: The entity + * @change: Use count change + * + * Change the entity use count by @change. If the entity is a subdev update its + * power state by calling the core::s_power operation when the use count goes + * from 0 to != 0 or from != 0 to 0. + * + * Return 0 on success or a negative error code on failure. + */ +static int iss_pipeline_pm_power_one(struct media_entity *entity, int change) +{ + struct v4l2_subdev *subdev; + + subdev = media_entity_type(entity) == MEDIA_ENT_T_V4L2_SUBDEV + ? media_entity_to_v4l2_subdev(entity) : NULL; + + if (entity->use_count == 0 && change > 0 && subdev != NULL) { + int ret; + + ret = v4l2_subdev_call(subdev, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + } + + entity->use_count += change; + WARN_ON(entity->use_count < 0); + + if (entity->use_count == 0 && change < 0 && subdev != NULL) + v4l2_subdev_call(subdev, core, s_power, 0); + + return 0; +} + +/* + * iss_pipeline_pm_power - Apply power change to all entities in a pipeline + * @entity: The entity + * @change: Use count change + * + * Walk the pipeline to update the use count and the power state of all non-node + * entities. + * + * Return 0 on success or a negative error code on failure. + */ +static int iss_pipeline_pm_power(struct media_entity *entity, int change) +{ + struct media_entity_graph graph; + struct media_entity *first = entity; + int ret = 0; + + if (!change) + return 0; + + media_entity_graph_walk_start(&graph, entity); + + while (!ret && (entity = media_entity_graph_walk_next(&graph))) + if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) + ret = iss_pipeline_pm_power_one(entity, change); + + if (!ret) + return 0; + + media_entity_graph_walk_start(&graph, first); + + while ((first = media_entity_graph_walk_next(&graph)) + && first != entity) + if (media_entity_type(first) != MEDIA_ENT_T_DEVNODE) + iss_pipeline_pm_power_one(first, -change); + + return ret; +} + +/* + * omap4iss_pipeline_pm_use - Update the use count of an entity + * @entity: The entity + * @use: Use (1) or stop using (0) the entity + * + * Update the use count of all entities in the pipeline and power entities on or + * off accordingly. + * + * Return 0 on success or a negative error code on failure. Powering entities + * off is assumed to never fail. No failure can occur when the use parameter is + * set to 0. + */ +int omap4iss_pipeline_pm_use(struct media_entity *entity, int use) +{ + int change = use ? 1 : -1; + int ret; + + mutex_lock(&entity->parent->graph_mutex); + + /* Apply use count to node. */ + entity->use_count += change; + WARN_ON(entity->use_count < 0); + + /* Apply power change to connected non-nodes. */ + ret = iss_pipeline_pm_power(entity, change); + if (ret < 0) + entity->use_count -= change; + + mutex_unlock(&entity->parent->graph_mutex); + + return ret; +} + +/* + * iss_pipeline_link_notify - Link management notification callback + * @source: Pad at the start of the link + * @sink: Pad at the end of the link + * @flags: New link flags that will be applied + * + * React to link management on powered pipelines by updating the use count of + * all entities in the source and sink sides of the link. Entities are powered + * on or off accordingly. + * + * Return 0 on success or a negative error code on failure. Powering entities + * off is assumed to never fail. This function will not fail for disconnection + * events. + */ +static int iss_pipeline_link_notify(struct media_pad *source, + struct media_pad *sink, u32 flags) +{ + int source_use = iss_pipeline_pm_use_count(source->entity); + int sink_use = iss_pipeline_pm_use_count(sink->entity); + int ret; + + if (!(flags & MEDIA_LNK_FL_ENABLED)) { + /* Powering off entities is assumed to never fail. */ + iss_pipeline_pm_power(source->entity, -sink_use); + iss_pipeline_pm_power(sink->entity, -source_use); + return 0; + } + + ret = iss_pipeline_pm_power(source->entity, sink_use); + if (ret < 0) + return ret; + + ret = iss_pipeline_pm_power(sink->entity, source_use); + if (ret < 0) + iss_pipeline_pm_power(source->entity, -sink_use); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Pipeline stream management + */ + +/* + * iss_pipeline_enable - Enable streaming on a pipeline + * @pipe: ISS pipeline + * @mode: Stream mode (single shot or continuous) + * + * Walk the entities chain starting at the pipeline output video node and start + * all modules in the chain in the given mode. + * + * Return 0 if successful, or the return value of the failed video::s_stream + * operation otherwise. + */ +static int iss_pipeline_enable(struct iss_pipeline *pipe, + enum iss_pipeline_stream_state mode) +{ + struct media_entity *entity; + struct media_pad *pad; + struct v4l2_subdev *subdev; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~(ISS_PIPELINE_IDLE_INPUT | ISS_PIPELINE_IDLE_OUTPUT); + spin_unlock_irqrestore(&pipe->lock, flags); + + pipe->do_propagation = false; + + entity = &pipe->output->video.entity; + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + ret = v4l2_subdev_call(subdev, video, s_stream, mode); + if (ret < 0 && ret != -ENOIOCTLCMD) + break; + } + + return ret; +} + +/* + * iss_pipeline_disable - Disable streaming on a pipeline + * @pipe: ISS pipeline + * + * Walk the entities chain starting at the pipeline output video node and stop + * all modules in the chain. Wait synchronously for the modules to be stopped if + * necessary. + */ +static int iss_pipeline_disable(struct iss_pipeline *pipe) +{ + struct media_entity *entity; + struct media_pad *pad; + struct v4l2_subdev *subdev; + int failure = 0; + + entity = &pipe->output->video.entity; + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + v4l2_subdev_call(subdev, video, s_stream, 0); + } + + return failure; +} + +/* + * omap4iss_pipeline_set_stream - Enable/disable streaming on a pipeline + * @pipe: ISS pipeline + * @state: Stream state (stopped, single shot or continuous) + * + * Set the pipeline to the given stream state. Pipelines can be started in + * single-shot or continuous mode. + * + * Return 0 if successful, or the return value of the failed video::s_stream + * operation otherwise. The pipeline state is not updated when the operation + * fails, except when stopping the pipeline. + */ +int omap4iss_pipeline_set_stream(struct iss_pipeline *pipe, + enum iss_pipeline_stream_state state) +{ + int ret; + + if (state == ISS_PIPELINE_STREAM_STOPPED) + ret = iss_pipeline_disable(pipe); + else + ret = iss_pipeline_enable(pipe, state); + + if (ret == 0 || state == ISS_PIPELINE_STREAM_STOPPED) + pipe->stream_state = state; + + return ret; +} + +/* + * iss_pipeline_is_last - Verify if entity has an enabled link to the output + * video node + * @me: ISS module's media entity + * + * Returns 1 if the entity has an enabled link to the output video node or 0 + * otherwise. It's true only while pipeline can have no more than one output + * node. + */ +static int iss_pipeline_is_last(struct media_entity *me) +{ + struct iss_pipeline *pipe; + struct media_pad *pad; + + if (!me->pipe) + return 0; + pipe = to_iss_pipeline(me); + if (pipe->stream_state == ISS_PIPELINE_STREAM_STOPPED) + return 0; + pad = media_entity_remote_source(&pipe->output->pad); + return pad->entity == me; +} + +static int iss_reset(struct iss_device *iss) +{ + unsigned long timeout = 0; + + writel(readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_SYSCONFIG) | + ISS_HL_SYSCONFIG_SOFTRESET, + iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_SYSCONFIG); + + while (readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_SYSCONFIG) & + ISS_HL_SYSCONFIG_SOFTRESET) { + if (timeout++ > 10000) { + dev_alert(iss->dev, "cannot reset ISS\n"); + return -ETIMEDOUT; + } + udelay(1); + } + + return 0; +} + +/* + * iss_save_context - Saves the values of the ISS module registers. + * @iss: OMAP4 ISS device + * @reg_list: Structure containing pairs of register address and value to + * modify on OMAP. + */ +static void +iss_save_context(struct iss_device *iss, struct iss_reg *reg_list) +{ + struct iss_reg *next = reg_list; + + for (; next->reg != ISS_TOK_TERM; next++) + next->val = readl(iss->regs[next->mmio_range] + next->reg); +} + +/* + * iss_restore_context - Restores the values of the ISS module registers. + * @iss: OMAP4 ISS device + * @reg_list: Structure containing pairs of register address and value to + * modify on OMAP. + */ +static void +iss_restore_context(struct iss_device *iss, struct iss_reg *reg_list) +{ + struct iss_reg *next = reg_list; + + for (; next->reg != ISS_TOK_TERM; next++) + writel(next->val, iss->regs[next->mmio_range] + next->reg); +} + +/* + * iss_save_ctx - Saves ISS context. + * @iss: OMAP4 ISS device + * + * Routine for saving the context of each module in the ISS. + */ +static void iss_save_ctx(struct iss_device *iss) +{ + iss_save_context(iss, iss_reg_list); +} + +/* + * iss_restore_ctx - Restores ISS context. + * @iss: OMAP4 ISS device + * + * Routine for restoring the context of each module in the ISS. + */ +static void iss_restore_ctx(struct iss_device *iss) +{ + iss_restore_context(iss, iss_reg_list); +} + +/* + * iss_module_sync_idle - Helper to sync module with its idle state + * @me: ISS submodule's media entity + * @wait: ISS submodule's wait queue for streamoff/interrupt synchronization + * @stopping: flag which tells module wants to stop + * + * This function checks if ISS submodule needs to wait for next interrupt. If + * yes, makes the caller to sleep while waiting for such event. + */ +int omap4iss_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, + atomic_t *stopping) +{ + struct iss_pipeline *pipe = to_iss_pipeline(me); + + if (pipe->stream_state == ISS_PIPELINE_STREAM_STOPPED || + (pipe->stream_state == ISS_PIPELINE_STREAM_SINGLESHOT && + !iss_pipeline_ready(pipe))) + return 0; + + /* + * atomic_set() doesn't include memory barrier on ARM platform for SMP + * scenario. We'll call it here to avoid race conditions. + */ + atomic_set(stopping, 1); + smp_mb(); + + /* + * If module is the last one, it's writing to memory. In this case, + * it's necessary to check if the module is already paused due to + * DMA queue underrun or if it has to wait for next interrupt to be + * idle. + * If it isn't the last one, the function won't sleep but *stopping + * will still be set to warn next submodule caller's interrupt the + * module wants to be idle. + */ + if (iss_pipeline_is_last(me)) { + struct iss_video *video = pipe->output; + unsigned long flags; + + spin_lock_irqsave(&video->qlock, flags); + if (video->dmaqueue_flags & ISS_VIDEO_DMAQUEUE_UNDERRUN) { + spin_unlock_irqrestore(&video->qlock, flags); + atomic_set(stopping, 0); + smp_mb(); + return 0; + } + spin_unlock_irqrestore(&video->qlock, flags); + if (!wait_event_timeout(*wait, !atomic_read(stopping), + msecs_to_jiffies(1000))) { + atomic_set(stopping, 0); + smp_mb(); + return -ETIMEDOUT; + } + } + + return 0; +} + +/* + * omap4iss_module_sync_is_stopped - Helper to verify if module was stopping + * @wait: ISS submodule's wait queue for streamoff/interrupt synchronization + * @stopping: flag which tells module wants to stop + * + * This function checks if ISS submodule was stopping. In case of yes, it + * notices the caller by setting stopping to 0 and waking up the wait queue. + * Returns 1 if it was stopping or 0 otherwise. + */ +int omap4iss_module_sync_is_stopping(wait_queue_head_t *wait, + atomic_t *stopping) +{ + if (atomic_cmpxchg(stopping, 1, 0)) { + wake_up(wait); + return 1; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Clock management + */ + +#define ISS_CLKCTRL_MASK (ISS_CLKCTRL_CSI2_A) + +static int __iss_subclk_update(struct iss_device *iss) +{ + u32 clk = 0; + int ret = 0, timeout = 1000; + + if (iss->subclk_resources & OMAP4_ISS_SUBCLK_CSI2_A) + clk |= ISS_CLKCTRL_CSI2_A; + + writel((readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_CLKCTRL) & + ~ISS_CLKCTRL_MASK) | clk, + iss->regs[OMAP4_ISS_MEM_TOP] + ISS_CLKCTRL); + + /* Wait for HW assertion */ + while (timeout-- > 0) { + udelay(1); + if ((readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_CLKSTAT) & + ISS_CLKCTRL_MASK) == clk) + break; + } + + if (!timeout) + ret = -EBUSY; + + return ret; +} + +int omap4iss_subclk_enable(struct iss_device *iss, + enum iss_subclk_resource res) +{ + iss->subclk_resources |= res; + + return __iss_subclk_update(iss); +} + +int omap4iss_subclk_disable(struct iss_device *iss, + enum iss_subclk_resource res) +{ + iss->subclk_resources &= ~res; + + return __iss_subclk_update(iss); +} + +/* + * iss_enable_clocks - Enable ISS clocks + * @iss: OMAP4 ISS device + * + * Return 0 if successful, or clk_enable return value if any of tthem fails. + */ +static int iss_enable_clocks(struct iss_device *iss) +{ + int r; + + r = clk_enable(iss->iss_fck); + if (r) { + dev_err(iss->dev, "clk_enable iss_fck failed\n"); + goto out_clk_enable_fck; + } + + r = clk_enable(iss->iss_ctrlclk); + if (r) { + dev_err(iss->dev, "clk_enable iss_ctrlclk failed\n"); + goto out_clk_enable_ctrlclk; + } + return 0; + +out_clk_enable_ctrlclk: + clk_disable(iss->iss_fck); +out_clk_enable_fck: + return r; +} + +/* + * iss_disable_clocks - Disable ISS clocks + * @iss: OMAP4 ISS device + */ +static void iss_disable_clocks(struct iss_device *iss) +{ + clk_disable(iss->iss_ctrlclk); + clk_disable(iss->iss_fck); +} + +static void iss_put_clocks(struct iss_device *iss) +{ + if (iss->iss_fck) { + clk_put(iss->iss_fck); + iss->iss_fck = NULL; + } + + if (iss->iss_ctrlclk) { + clk_put(iss->iss_ctrlclk); + iss->iss_ctrlclk = NULL; + } +} + +static int iss_get_clocks(struct iss_device *iss) +{ + iss->iss_fck = clk_get(iss->dev, "iss_fck"); + if (IS_ERR(iss->iss_fck)) { + dev_err(iss->dev, "Unable to get iss_fck clock info\n"); + iss_put_clocks(iss); + return PTR_ERR(iss->iss_fck); + } + + iss->iss_ctrlclk = clk_get(iss->dev, "iss_ctrlclk"); + if (IS_ERR(iss->iss_ctrlclk)) { + dev_err(iss->dev, "Unable to get iss_ctrlclk clock info\n"); + iss_put_clocks(iss); + return PTR_ERR(iss->iss_fck); + } + + return 0; +} + +/* + * omap4iss_get - Acquire the ISS resource. + * + * Initializes the clocks for the first acquire. + * + * Increment the reference count on the ISS. If the first reference is taken, + * enable clocks and power-up all submodules. + * + * Return a pointer to the ISS device structure, or NULL if an error occurred. + */ +struct iss_device *omap4iss_get(struct iss_device *iss) +{ + struct iss_device *__iss = iss; + + if (iss == NULL) + return NULL; + + mutex_lock(&iss->iss_mutex); + if (iss->ref_count > 0) + goto out; + + if (iss_enable_clocks(iss) < 0) { + __iss = NULL; + goto out; + } + + /* We don't want to restore context before saving it! */ + if (iss->has_context) + iss_restore_ctx(iss); + else + iss->has_context = 1; + + iss_enable_interrupts(iss); + +out: + if (__iss != NULL) + iss->ref_count++; + mutex_unlock(&iss->iss_mutex); + + return __iss; +} + +/* + * omap4iss_put - Release the ISS + * + * Decrement the reference count on the ISS. If the last reference is released, + * power-down all submodules, disable clocks and free temporary buffers. + */ +void omap4iss_put(struct iss_device *iss) +{ + if (iss == NULL) + return; + + mutex_lock(&iss->iss_mutex); + BUG_ON(iss->ref_count == 0); + if (--iss->ref_count == 0) { + iss_disable_interrupts(iss); + iss_save_ctx(iss); + iss_disable_clocks(iss); + } + mutex_unlock(&iss->iss_mutex); +} + +static int iss_map_mem_resource(struct platform_device *pdev, + struct iss_device *iss, + enum iss_mem_resources res) +{ + struct resource *mem; + + /* request the mem region for the camera registers */ + + mem = platform_get_resource(pdev, IORESOURCE_MEM, res); + if (!mem) { + dev_err(iss->dev, "no mem resource?\n"); + return -ENODEV; + } + + if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { + dev_err(iss->dev, + "cannot reserve camera register I/O region\n"); + return -ENODEV; + } + iss->res[res] = mem; + + /* map the region */ + iss->regs[res] = ioremap_nocache(mem->start, resource_size(mem)); + if (!iss->regs[res]) { + dev_err(iss->dev, "cannot map camera register I/O region\n"); + return -ENODEV; + } + + return 0; +} + +static void iss_unregister_entities(struct iss_device *iss) +{ + omap4iss_csi2_unregister_entities(&iss->csi2a); + + v4l2_device_unregister(&iss->v4l2_dev); + media_device_unregister(&iss->media_dev); +} + +/* + * iss_register_subdev_group - Register a group of subdevices + * @iss: OMAP4 ISS device + * @board_info: I2C subdevs board information array + * + * Register all I2C subdevices in the board_info array. The array must be + * terminated by a NULL entry, and the first entry must be the sensor. + * + * Return a pointer to the sensor media entity if it has been successfully + * registered, or NULL otherwise. + */ +static struct v4l2_subdev * +iss_register_subdev_group(struct iss_device *iss, + struct iss_subdev_i2c_board_info *board_info) +{ + struct v4l2_subdev *sensor = NULL; + unsigned int first; + + if (board_info->board_info == NULL) + return NULL; + + for (first = 1; board_info->board_info; ++board_info, first = 0) { + struct v4l2_subdev *subdev; + struct i2c_adapter *adapter; + + adapter = i2c_get_adapter(board_info->i2c_adapter_id); + if (adapter == NULL) { + printk(KERN_ERR "%s: Unable to get I2C adapter %d for " + "device %s\n", __func__, + board_info->i2c_adapter_id, + board_info->board_info->type); + continue; + } + + subdev = v4l2_i2c_new_subdev_board(&iss->v4l2_dev, adapter, + board_info->board_info, NULL); + if (subdev == NULL) { + printk(KERN_ERR "%s: Unable to register subdev %s\n", + __func__, board_info->board_info->type); + continue; + } + + if (first) + sensor = subdev; + } + + return sensor; +} + +static int iss_register_entities(struct iss_device *iss) +{ + struct iss_platform_data *pdata = iss->pdata; + struct iss_v4l2_subdevs_group *subdevs; + int ret; + + iss->media_dev.dev = iss->dev; + strlcpy(iss->media_dev.model, "TI OMAP4 ISS", + sizeof(iss->media_dev.model)); + iss->media_dev.link_notify = iss_pipeline_link_notify; + ret = media_device_register(&iss->media_dev); + if (ret < 0) { + printk(KERN_ERR "%s: Media device registration failed (%d)\n", + __func__, ret); + return ret; + } + + iss->v4l2_dev.mdev = &iss->media_dev; + ret = v4l2_device_register(iss->dev, &iss->v4l2_dev); + if (ret < 0) { + printk(KERN_ERR "%s: V4L2 device registration failed (%d)\n", + __func__, ret); + goto done; + } + + /* Register internal entities */ + ret = omap4iss_csi2_register_entities(&iss->csi2a, &iss->v4l2_dev); + if (ret < 0) + goto done; + + /* Register external entities */ + for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) { + struct v4l2_subdev *sensor; + struct media_entity *input; + unsigned int flags; + unsigned int pad; + + sensor = iss_register_subdev_group(iss, subdevs->subdevs); + if (sensor == NULL) + continue; + + sensor->host_priv = subdevs; + + /* Connect the sensor to the correct interface module. + * CSI2a receiver through CSIPHY1. + */ + switch (subdevs->interface) { + case ISS_INTERFACE_CSI2A_PHY1: + input = &iss->csi2a.subdev.entity; + pad = CSI2_PAD_SINK; + flags = MEDIA_LNK_FL_IMMUTABLE + | MEDIA_LNK_FL_ENABLED; + break; + + default: + printk(KERN_ERR "%s: invalid interface type %u\n", + __func__, subdevs->interface); + ret = -EINVAL; + goto done; + } + + ret = media_entity_create_link(&sensor->entity, 0, input, pad, + flags); + if (ret < 0) + goto done; + } + + ret = v4l2_device_register_subdev_nodes(&iss->v4l2_dev); + +done: + if (ret < 0) + iss_unregister_entities(iss); + + return ret; +} + +static void iss_cleanup_modules(struct iss_device *iss) +{ + omap4iss_csi2_cleanup(iss); +} + +static int iss_initialize_modules(struct iss_device *iss) +{ + int ret; + + ret = omap4iss_csiphy_init(iss); + if (ret < 0) { + dev_err(iss->dev, "CSI PHY initialization failed\n"); + goto error_csiphy; + } + + ret = omap4iss_csi2_init(iss); + if (ret < 0) { + dev_err(iss->dev, "CSI2 initialization failed\n"); + goto error_csi2; + } + + return 0; + +error_csi2: +error_csiphy: + return ret; +} + +static int iss_probe(struct platform_device *pdev) +{ + struct iss_platform_data *pdata = pdev->dev.platform_data; + struct iss_device *iss; + int i, ret; + + if (pdata == NULL) + return -EINVAL; + + iss = kzalloc(sizeof(*iss), GFP_KERNEL); + if (!iss) { + dev_err(&pdev->dev, "Could not allocate memory\n"); + return -ENOMEM; + } + + mutex_init(&iss->iss_mutex); + + iss->dev = &pdev->dev; + iss->pdata = pdata; + iss->ref_count = 0; + + iss->raw_dmamask = DMA_BIT_MASK(32); + iss->dev->dma_mask = &iss->raw_dmamask; + iss->dev->coherent_dma_mask = DMA_BIT_MASK(32); + + platform_set_drvdata(pdev, iss); + + /* Clocks */ + ret = iss_map_mem_resource(pdev, iss, OMAP4_ISS_MEM_TOP); + if (ret < 0) + goto error; + + ret = iss_get_clocks(iss); + if (ret < 0) + goto error; + + if (omap4iss_get(iss) == NULL) + goto error; + + ret = iss_reset(iss); + if (ret < 0) + goto error_iss; + + iss->revision = readl(iss->regs[OMAP4_ISS_MEM_TOP] + ISS_HL_REVISION); + dev_info(iss->dev, "Revision %08x found\n", iss->revision); + + for (i = 1; i < OMAP4_ISS_MEM_LAST; i++) { + ret = iss_map_mem_resource(pdev, iss, i); + if (ret) + goto error_iss; + } + + /* Interrupt */ + iss->irq_num = platform_get_irq(pdev, 0); + if (iss->irq_num <= 0) { + dev_err(iss->dev, "No IRQ resource\n"); + ret = -ENODEV; + goto error_iss; + } + + if (request_irq(iss->irq_num, iss_isr, IRQF_SHARED, "OMAP4 ISS", iss)) { + dev_err(iss->dev, "Unable to request IRQ\n"); + ret = -EINVAL; + goto error_iss; + } + + /* Entities */ + ret = iss_initialize_modules(iss); + if (ret < 0) + goto error_irq; + + ret = iss_register_entities(iss); + if (ret < 0) + goto error_modules; + + omap4iss_put(iss); + + return 0; + +error_modules: + iss_cleanup_modules(iss); +error_irq: + free_irq(iss->irq_num, iss); +error_iss: + omap4iss_put(iss); +error: + iss_put_clocks(iss); + + for (i = 0; i < OMAP4_ISS_MEM_LAST; i++) { + if (iss->regs[i]) { + iounmap(iss->regs[i]); + iss->regs[i] = NULL; + } + + if (iss->res[i]) { + release_mem_region(iss->res[i]->start, + resource_size(iss->res[i])); + iss->res[i] = NULL; + } + } + platform_set_drvdata(pdev, NULL); + kfree(iss); + + return ret; +} + +static int iss_remove(struct platform_device *pdev) +{ + struct iss_device *iss = platform_get_drvdata(pdev); + int i; + + iss_unregister_entities(iss); + iss_cleanup_modules(iss); + + free_irq(iss->irq_num, iss); + iss_put_clocks(iss); + + for (i = 0; i < OMAP4_ISS_MEM_LAST; i++) { + if (iss->regs[i]) { + iounmap(iss->regs[i]); + iss->regs[i] = NULL; + } + + if (iss->res[i]) { + release_mem_region(iss->res[i]->start, + resource_size(iss->res[i])); + iss->res[i] = NULL; + } + } + + kfree(iss); + + return 0; +} + +static struct platform_device_id omap4iss_id_table[] = { + { "omap4iss", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, omap4iss_id_table); + +static struct platform_driver iss_driver = { + .probe = iss_probe, + .remove = iss_remove, + .id_table = omap4iss_id_table, + .driver = { + .owner = THIS_MODULE, + .name = "omap4iss", + }, +}; + +static int __init iss_init(void) +{ + return platform_driver_register(&iss_driver); +} + +static void __exit iss_exit(void) +{ + platform_driver_unregister(&iss_driver); +} + +/* + * FIXME: Had to make it late_initcall. Strangely while being module_init, + * The I2C communication was failing in the sensor, because no XCLK was + * provided. + */ +late_initcall(iss_init); +module_exit(iss_exit); + +MODULE_DESCRIPTION("TI OMAP4 ISS driver"); +MODULE_AUTHOR("Sergio Aguirre <saaguirre@xxxxxx>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/omap4iss/iss.h b/drivers/media/video/omap4iss/iss.h new file mode 100644 index 0000000..8346c80 --- /dev/null +++ b/drivers/media/video/omap4iss/iss.h @@ -0,0 +1,133 @@ +/* + * iss.h + * + * Copyright (C) 2011 Texas Instruments. + * + * Author: Sergio Aguirre <saaguirre@xxxxxx> + */ + +#ifndef _OMAP4_ISS_H_ +#define _OMAP4_ISS_H_ + +#include <media/v4l2-device.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/wait.h> + +#include <plat/omap4-iss.h> + +#include "iss_regs.h" +#include "iss_csiphy.h" +#include "iss_csi2.h" + +#define ISS_TOK_TERM 0xFFFFFFFF /* + * terminating token for ISS + * modules reg list + */ +#define to_iss_device(ptr_module) \ + container_of(ptr_module, struct iss_device, ptr_module) +#define to_device(ptr_module) \ + (to_iss_device(ptr_module)->dev) + +enum iss_mem_resources { + OMAP4_ISS_MEM_TOP, + OMAP4_ISS_MEM_CSI2_A_REGS1, + OMAP4_ISS_MEM_CAMERARX_CORE1, + OMAP4_ISS_MEM_LAST, +}; + +enum iss_subclk_resource { + OMAP4_ISS_SUBCLK_SIMCOP = (1 << 0), + OMAP4_ISS_SUBCLK_ISP = (1 << 1), + OMAP4_ISS_SUBCLK_CSI2_A = (1 << 2), + OMAP4_ISS_SUBCLK_CSI2_B = (1 << 3), + OMAP4_ISS_SUBCLK_CCP2 = (1 << 4), +}; + +/* + * struct iss_reg - Structure for ISS register values. + * @reg: 32-bit Register address. + * @val: 32-bit Register value. + */ +struct iss_reg { + enum iss_mem_resources mmio_range; + u32 reg; + u32 val; +}; + +struct iss_platform_callback { + int (*csiphy_config)(struct iss_csiphy *phy, + struct iss_csiphy_dphy_cfg *dphy, + struct iss_csiphy_lanes_cfg *lanes); +}; + +struct iss_device { + struct v4l2_device v4l2_dev; + struct media_device media_dev; + struct device *dev; + u32 revision; + + /* platform HW resources */ + struct iss_platform_data *pdata; + unsigned int irq_num; + + struct resource *res[OMAP4_ISS_MEM_LAST]; + void __iomem *regs[OMAP4_ISS_MEM_LAST]; + + u64 raw_dmamask; + + struct mutex iss_mutex; /* For handling ref_count field */ + int has_context; + int ref_count; + + struct clk *iss_fck; + struct clk *iss_ctrlclk; + + /* ISS modules */ + struct iss_csi2_device csi2a; + struct iss_csiphy csiphy1; + + unsigned int subclk_resources; + + struct iss_platform_callback platform_cb; +}; + +#define v4l2_dev_to_iss_device(dev) \ + container_of(dev, struct iss_device, v4l2_dev) + +int omap4iss_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, + atomic_t *stopping); + +int omap4iss_module_sync_is_stopping(wait_queue_head_t *wait, + atomic_t *stopping); + +int omap4iss_pipeline_set_stream(struct iss_pipeline *pipe, + enum iss_pipeline_stream_state state); + +struct iss_device *omap4iss_get(struct iss_device *iss); +void omap4iss_put(struct iss_device *iss); +int omap4iss_subclk_enable(struct iss_device *iss, + enum iss_subclk_resource res); +int omap4iss_subclk_disable(struct iss_device *iss, + enum iss_subclk_resource res); + +int omap4iss_pipeline_pm_use(struct media_entity *entity, int use); + +int omap4iss_register_entities(struct platform_device *pdev, + struct v4l2_device *v4l2_dev); +void omap4iss_unregister_entities(struct platform_device *pdev); + +static inline enum v4l2_buf_type +iss_pad_buffer_type(const struct v4l2_subdev *subdev, int pad) +{ + if (pad >= subdev->entity.num_pads) + return 0; + + if (subdev->entity.pads[pad].flags & MEDIA_PAD_FL_SINK) + return V4L2_BUF_TYPE_VIDEO_OUTPUT; + else + return V4L2_BUF_TYPE_VIDEO_CAPTURE; +} + +#endif /* _OMAP4_ISS_H_ */ diff --git a/drivers/media/video/omap4iss/iss_csi2.c b/drivers/media/video/omap4iss/iss_csi2.c new file mode 100644 index 0000000..916d5ef --- /dev/null +++ b/drivers/media/video/omap4iss/iss_csi2.c @@ -0,0 +1,1324 @@ +/* + * iss_csi2.c + * + * TI OMAP4 ISS - CSI PHY module + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/delay.h> +#include <media/v4l2-common.h> +#include <linux/v4l2-mediabus.h> +#include <linux/mm.h> + +#include "iss.h" +#include "iss_regs.h" +#include "iss_csi2.h" + +/* + * csi2_if_enable - Enable CSI2 Receiver interface. + * @enable: enable flag + * + */ +static void csi2_if_enable(struct iss_csi2_device *csi2, u8 enable) +{ + struct iss_csi2_ctrl_cfg *currctrl = &csi2->ctrl; + + writel((readl(csi2->regs1 + CSI2_CTRL) & ~CSI2_CTRL_IF_EN) | + (enable ? CSI2_CTRL_IF_EN : 0), + csi2->regs1 + CSI2_CTRL); + + currctrl->if_enable = enable; +} + +/* + * csi2_recv_config - CSI2 receiver module configuration. + * @currctrl: iss_csi2_ctrl_cfg structure + * + */ +static void csi2_recv_config(struct iss_csi2_device *csi2, + struct iss_csi2_ctrl_cfg *currctrl) +{ + u32 reg; + + reg = readl(csi2->regs1 + CSI2_CTRL); + + if (currctrl->frame_mode) + reg |= CSI2_CTRL_FRAME; + else + reg &= ~CSI2_CTRL_FRAME; + + if (currctrl->vp_clk_enable) + reg |= CSI2_CTRL_VP_CLK_EN; + else + reg &= ~CSI2_CTRL_VP_CLK_EN; + + if (currctrl->vp_only_enable) + reg |= CSI2_CTRL_VP_ONLY_EN; + else + reg &= ~CSI2_CTRL_VP_ONLY_EN; + + reg &= ~CSI2_CTRL_VP_OUT_CTRL_MASK; + reg |= currctrl->vp_out_ctrl << CSI2_CTRL_VP_OUT_CTRL_SHIFT; + + if (currctrl->ecc_enable) + reg |= CSI2_CTRL_ECC_EN; + else + reg &= ~CSI2_CTRL_ECC_EN; + + /* + * Set MFlag assertion boundaries to: + * Low: 4/8 of FIFO size + * High: 6/8 of FIFO size + */ + reg &= ~(CSI2_CTRL_MFLAG_LEVH_MASK | CSI2_CTRL_MFLAG_LEVL_MASK); + reg |= (2 << CSI2_CTRL_MFLAG_LEVH_SHIFT) | + (4 << CSI2_CTRL_MFLAG_LEVL_SHIFT); + + /* Generation of 16x64-bit bursts (Recommended) */ + reg |= CSI2_CTRL_BURST_SIZE_EXPAND; + + /* Do Non-Posted writes (Recommended) */ + reg |= CSI2_CTRL_NON_POSTED_WRITE; + + /* + * Enforce Little endian for all formats, including: + * YUV4:2:2 8-bit and YUV4:2:0 Legacy + */ + reg |= CSI2_CTRL_ENDIANNESS; + + writel(reg, csi2->regs1 + CSI2_CTRL); +} + +static const unsigned int csi2_input_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, + V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, + V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, +}; + +/* To set the format on the CSI2 requires a mapping function that takes + * the following inputs: + * - 3 different formats (at this time) + * - 2 destinations (mem, vp+mem) (vp only handled separately) + * - 2 decompression options (on, off) + * Output should be CSI2 frame format code + * Array indices as follows: [format][dest][decompr] + * Not all combinations are valid. 0 means invalid. + */ +static const u16 __csi2_fmt_map[][2][2] = { + /* RAW10 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + CSI2_PIX_FMT_RAW10_EXP16, + /* DPCM decompression */ + 0, + }, + /* Output to both */ + { + /* No DPCM decompression */ + CSI2_PIX_FMT_RAW10_EXP16_VP, + /* DPCM decompression */ + 0, + }, + }, + /* RAW10 DPCM8 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + CSI2_USERDEF_8BIT_DATA1, + /* DPCM decompression */ + CSI2_USERDEF_8BIT_DATA1_DPCM10, + }, + /* Output to both */ + { + /* No DPCM decompression */ + CSI2_PIX_FMT_RAW8_VP, + /* DPCM decompression */ + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP, + }, + }, + /* YUV422 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + CSI2_PIX_FMT_YUV422_8BIT, + /* DPCM decompression */ + 0, + }, + /* Output to both */ + { + /* No DPCM decompression */ + CSI2_PIX_FMT_YUV422_8BIT_VP, + /* DPCM decompression */ + 0, + }, + }, +}; + +/* + * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID + * @csi2: ISS CSI2 device + * + * Returns CSI2 physical format id + */ +static u16 csi2_ctx_map_format(struct iss_csi2_device *csi2) +{ + const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK]; + int fmtidx, destidx; + + switch (fmt->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + case V4L2_MBUS_FMT_SRGGB10_1X10: + case V4L2_MBUS_FMT_SBGGR10_1X10: + case V4L2_MBUS_FMT_SGBRG10_1X10: + fmtidx = 0; + break; + case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: + case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8: + case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8: + case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8: + fmtidx = 1; + break; + case V4L2_MBUS_FMT_UYVY8_1X16: + case V4L2_MBUS_FMT_YUYV8_1X16: + fmtidx = 2; + break; + default: + WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n", + fmt->code); + return 0; + } + + if (!(csi2->output & CSI2_OUTPUT_IPIPEIF) && + !(csi2->output & CSI2_OUTPUT_MEMORY)) { + /* Neither output enabled is a valid combination */ + return CSI2_PIX_FMT_OTHERS; + } + + /* If we need to skip frames at the beginning of the stream disable the + * video port to avoid sending the skipped frames to the IPIPEIF. + */ + destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_IPIPEIF); + + return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress]; +} + +/* + * csi2_set_outaddr - Set memory address to save output image + * @csi2: Pointer to ISS CSI2a device. + * @addr: 32-bit memory address aligned on 32 byte boundary. + * + * Sets the memory address where the output will be saved. + * + * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte + * boundary. + */ +static void csi2_set_outaddr(struct iss_csi2_device *csi2, u32 addr) +{ + struct iss_csi2_ctx_cfg *ctx = &csi2->contexts[0]; + + ctx->ping_addr = addr; + ctx->pong_addr = addr; + writel(ctx->ping_addr, + csi2->regs1 + CSI2_CTX_PING_ADDR(ctx->ctxnum)); + writel(ctx->pong_addr, + csi2->regs1 + CSI2_CTX_PONG_ADDR(ctx->ctxnum)); +} + +/* + * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should + * be enabled by CSI2. + * @format_id: mapped format id + * + */ +static inline int is_usr_def_mapping(u32 format_id) +{ + return (format_id & 0x40) ? 1 : 0; +} + +/* + * csi2_ctx_enable - Enable specified CSI2 context + * @ctxnum: Context number, valid between 0 and 7 values. + * @enable: enable + * + */ +static void csi2_ctx_enable(struct iss_csi2_device *csi2, u8 ctxnum, u8 enable) +{ + struct iss_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum]; + u32 reg; + + reg = readl(csi2->regs1 + CSI2_CTX_CTRL1(ctxnum)); + + if (enable) { + unsigned int skip = 0; + + if (csi2->frame_skip) + skip = csi2->frame_skip; + else if (csi2->output & CSI2_OUTPUT_MEMORY) + skip = 1; + + reg &= ~CSI2_CTX_CTRL1_COUNT_MASK; + reg |= CSI2_CTX_CTRL1_COUNT_UNLOCK + | (skip << CSI2_CTX_CTRL1_COUNT_SHIFT) + | CSI2_CTX_CTRL1_CTX_EN; + } else { + reg &= ~CSI2_CTX_CTRL1_CTX_EN; + } + + writel(reg, csi2->regs1 + CSI2_CTX_CTRL1(ctxnum)); + ctx->enabled = enable; +} + +/* + * csi2_ctx_config - CSI2 context configuration. + * @ctx: context configuration + * + */ +static void csi2_ctx_config(struct iss_csi2_device *csi2, + struct iss_csi2_ctx_cfg *ctx) +{ + u32 reg; + + /* Set up CSI2_CTx_CTRL1 */ + reg = readl(csi2->regs1 + CSI2_CTX_CTRL1(ctx->ctxnum)); + + if (ctx->eof_enabled) + reg |= CSI2_CTX_CTRL1_EOF_EN; + else + reg &= ~CSI2_CTX_CTRL1_EOF_EN; + + if (ctx->eol_enabled) + reg |= CSI2_CTX_CTRL1_EOL_EN; + else + reg &= ~CSI2_CTX_CTRL1_EOL_EN; + + if (ctx->checksum_enabled) + reg |= CSI2_CTX_CTRL1_CS_EN; + else + reg &= ~CSI2_CTX_CTRL1_CS_EN; + + writel(reg, csi2->regs1 + CSI2_CTX_CTRL1(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL2 */ + reg = readl(csi2->regs1 + CSI2_CTX_CTRL2(ctx->ctxnum)); + + reg &= ~(CSI2_CTX_CTRL2_VIRTUAL_ID_MASK); + reg |= ctx->virtual_id << CSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; + + reg &= ~(CSI2_CTX_CTRL2_FORMAT_MASK); + reg |= ctx->format_id << CSI2_CTX_CTRL2_FORMAT_SHIFT; + + if (ctx->dpcm_decompress) { + if (ctx->dpcm_predictor) + reg |= CSI2_CTX_CTRL2_DPCM_PRED; + else + reg &= ~CSI2_CTX_CTRL2_DPCM_PRED; + } + + if (is_usr_def_mapping(ctx->format_id)) { + reg &= ~CSI2_CTX_CTRL2_USER_DEF_MAP_MASK; + reg |= 2 << CSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT; + } + + writel(reg, csi2->regs1 + CSI2_CTX_CTRL2(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL3 */ + reg = readl(csi2->regs1 + CSI2_CTX_CTRL3(ctx->ctxnum)); + reg &= ~(CSI2_CTX_CTRL3_ALPHA_MASK); + reg |= (ctx->alpha << CSI2_CTX_CTRL3_ALPHA_SHIFT); + + writel(reg, csi2->regs1 + CSI2_CTX_CTRL3(ctx->ctxnum)); + + /* Set up CSI2_CTx_DAT_OFST */ + reg = readl(csi2->regs1 + CSI2_CTX_DAT_OFST(ctx->ctxnum)); + reg &= ~CSI2_CTX_DAT_OFST_MASK; + reg |= ctx->data_offset; + writel(reg, csi2->regs1 + CSI2_CTX_DAT_OFST(ctx->ctxnum)); + + writel(ctx->ping_addr, + csi2->regs1 + CSI2_CTX_PING_ADDR(ctx->ctxnum)); + + writel(ctx->pong_addr, + csi2->regs1 + CSI2_CTX_PONG_ADDR(ctx->ctxnum)); +} + +/* + * csi2_timing_config - CSI2 timing configuration. + * @timing: csi2_timing_cfg structure + */ +static void csi2_timing_config(struct iss_csi2_device *csi2, + struct iss_csi2_timing_cfg *timing) +{ + u32 reg; + + reg = readl(csi2->regs1 + CSI2_TIMING); + + if (timing->force_rx_mode) + reg |= CSI2_TIMING_FORCE_RX_MODE_IO1; + else + reg &= ~CSI2_TIMING_FORCE_RX_MODE_IO1; + + if (timing->stop_state_16x) + reg |= CSI2_TIMING_STOP_STATE_X16_IO1; + else + reg &= ~CSI2_TIMING_STOP_STATE_X16_IO1; + + if (timing->stop_state_4x) + reg |= CSI2_TIMING_STOP_STATE_X4_IO1; + else + reg &= ~CSI2_TIMING_STOP_STATE_X4_IO1; + + reg &= ~CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK; + reg |= timing->stop_state_counter << + CSI2_TIMING_STOP_STATE_COUNTER_IO1_SHIFT; + + writel(reg, csi2->regs1 + CSI2_TIMING); +} + +/* + * csi2_irq_ctx_set - Enables CSI2 Context IRQs. + * @enable: Enable/disable CSI2 Context interrupts + */ +static void csi2_irq_ctx_set(struct iss_csi2_device *csi2, int enable) +{ + u32 reg = CSI2_CTX_IRQ_FE; + int i; + + if (csi2->use_fs_irq) + reg |= CSI2_CTX_IRQ_FS; + + for (i = 0; i < 8; i++) { + writel(reg, csi2->regs1 + CSI2_CTX_IRQSTATUS(i)); + if (enable) + writel(readl(csi2->regs1 + CSI2_CTX_IRQENABLE(i)) | reg, + csi2->regs1 + CSI2_CTX_IRQENABLE(i)); + else + writel(readl(csi2->regs1 + CSI2_CTX_IRQENABLE(i)) & + ~reg, + csi2->regs1 + CSI2_CTX_IRQENABLE(i)); + } +} + +/* + * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs. + * @enable: Enable/disable CSI2 ComplexIO #1 interrupts + */ +static void csi2_irq_complexio1_set(struct iss_csi2_device *csi2, int enable) +{ + u32 reg; + reg = CSI2_COMPLEXIO_IRQ_STATEALLULPMEXIT | + CSI2_COMPLEXIO_IRQ_STATEALLULPMENTER | + CSI2_COMPLEXIO_IRQ_STATEULPM5 | + CSI2_COMPLEXIO_IRQ_ERRCONTROL5 | + CSI2_COMPLEXIO_IRQ_ERRESC5 | + CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS5 | + CSI2_COMPLEXIO_IRQ_ERRSOTHS5 | + CSI2_COMPLEXIO_IRQ_STATEULPM4 | + CSI2_COMPLEXIO_IRQ_ERRCONTROL4 | + CSI2_COMPLEXIO_IRQ_ERRESC4 | + CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS4 | + CSI2_COMPLEXIO_IRQ_ERRSOTHS4 | + CSI2_COMPLEXIO_IRQ_STATEULPM3 | + CSI2_COMPLEXIO_IRQ_ERRCONTROL3 | + CSI2_COMPLEXIO_IRQ_ERRESC3 | + CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS3 | + CSI2_COMPLEXIO_IRQ_ERRSOTHS3 | + CSI2_COMPLEXIO_IRQ_STATEULPM2 | + CSI2_COMPLEXIO_IRQ_ERRCONTROL2 | + CSI2_COMPLEXIO_IRQ_ERRESC2 | + CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS2 | + CSI2_COMPLEXIO_IRQ_ERRSOTHS2 | + CSI2_COMPLEXIO_IRQ_STATEULPM1 | + CSI2_COMPLEXIO_IRQ_ERRCONTROL1 | + CSI2_COMPLEXIO_IRQ_ERRESC1 | + CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS1 | + CSI2_COMPLEXIO_IRQ_ERRSOTHS1; + writel(reg, csi2->regs1 + CSI2_COMPLEXIO_IRQSTATUS); + if (enable) + reg |= readl(csi2->regs1 + CSI2_COMPLEXIO_IRQENABLE); + else + reg = 0; + writel(reg, csi2->regs1 + CSI2_COMPLEXIO_IRQENABLE); +} + +/* + * csi2_irq_status_set - Enables CSI2 Status IRQs. + * @enable: Enable/disable CSI2 Status interrupts + */ +static void csi2_irq_status_set(struct iss_csi2_device *csi2, int enable) +{ + u32 reg; + reg = CSI2_IRQ_OCP_ERR | + CSI2_IRQ_SHORT_PACKET | + CSI2_IRQ_ECC_CORRECTION | + CSI2_IRQ_ECC_NO_CORRECTION | + CSI2_IRQ_COMPLEXIO_ERR | + CSI2_IRQ_FIFO_OVF | + CSI2_IRQ_CONTEXT0; + writel(reg, csi2->regs1 + CSI2_IRQSTATUS); + if (enable) + reg |= readl(csi2->regs1 + CSI2_IRQENABLE); + else + reg = 0; + + writel(reg, csi2->regs1 + CSI2_IRQENABLE); +} + +/* + * omap4iss_csi2_reset - Resets the CSI2 module. + * + * Must be called with the phy lock held. + * + * Returns 0 if successful, or -EBUSY if power command didn't respond. + */ +int omap4iss_csi2_reset(struct iss_csi2_device *csi2) +{ + u8 soft_reset_retries = 0; + u32 reg; + int i; + + if (!csi2->available) + return -ENODEV; + + if (csi2->phy->phy_in_use) + return -EBUSY; + + writel(readl(csi2->regs1 + CSI2_SYSCONFIG) | + CSI2_SYSCONFIG_SOFT_RESET, + csi2->regs1 + CSI2_SYSCONFIG); + + do { + reg = readl(csi2->regs1 + CSI2_SYSSTATUS) & + CSI2_SYSSTATUS_RESET_DONE; + if (reg == CSI2_SYSSTATUS_RESET_DONE) + break; + soft_reset_retries++; + if (soft_reset_retries < 5) + udelay(100); + } while (soft_reset_retries < 5); + + if (soft_reset_retries == 5) { + printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n"); + return -EBUSY; + } + + writel(readl(csi2->regs1 + CSI2_COMPLEXIO_CFG) | + CSI2_COMPLEXIO_CFG_RESET_CTRL, + csi2->regs1 + CSI2_COMPLEXIO_CFG); + + i = 100; + do { + reg = readl(csi2->phy->phy_regs + REGISTER1) + & REGISTER1_RESET_DONE_CTRLCLK; + if (reg == REGISTER1_RESET_DONE_CTRLCLK) + break; + udelay(100); + } while (--i > 0); + + if (i == 0) { + printk(KERN_ERR + "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n"); + return -EBUSY; + } + + writel((readl(csi2->regs1 + CSI2_SYSCONFIG) & + ~(CSI2_SYSCONFIG_MSTANDBY_MODE_MASK | + CSI2_SYSCONFIG_AUTO_IDLE)) | + CSI2_SYSCONFIG_MSTANDBY_MODE_NO, + csi2->regs1 + CSI2_SYSCONFIG); + + return 0; +} + +static int csi2_configure(struct iss_csi2_device *csi2) +{ + const struct iss_v4l2_subdevs_group *pdata; + struct iss_csi2_timing_cfg *timing = &csi2->timing[0]; + struct v4l2_subdev *sensor; + struct media_pad *pad; + + /* + * CSI2 fields that can be updated while the context has + * been enabled or the interface has been enabled are not + * updated dynamically currently. So we do not allow to + * reconfigure if either has been enabled + */ + if (csi2->contexts[0].enabled || csi2->ctrl.if_enable) + return -EBUSY; + + pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = sensor->host_priv; + + csi2->frame_skip = 0; + v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip); + + csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div; + csi2->ctrl.frame_mode = ISS_CSI2_FRAME_IMMEDIATE; + csi2->ctrl.ecc_enable = pdata->bus.csi2.crc; + + timing->force_rx_mode = 1; + timing->stop_state_16x = 1; + timing->stop_state_4x = 1; + timing->stop_state_counter = 0x1FF; + + /* + * The CSI2 receiver can't do any format conversion except DPCM + * decompression, so every set_format call configures both pads + * and enables DPCM decompression as a special case: + */ + if (csi2->formats[CSI2_PAD_SINK].code != + csi2->formats[CSI2_PAD_SOURCE].code) + csi2->dpcm_decompress = true; + else + csi2->dpcm_decompress = false; + + csi2->contexts[0].format_id = csi2_ctx_map_format(csi2); + + if (csi2->video_out.bpl_padding == 0) + csi2->contexts[0].data_offset = 0; + else + csi2->contexts[0].data_offset = csi2->video_out.bpl_value; + + /* + * Enable end of frame and end of line signals generation for + * context 0. These signals are generated from CSI2 receiver to + * qualify the last pixel of a frame and the last pixel of a line. + * Without enabling the signals CSI2 receiver writes data to memory + * beyond buffer size and/or data line offset is not handled correctly. + */ + csi2->contexts[0].eof_enabled = 1; + csi2->contexts[0].eol_enabled = 1; + + csi2_irq_complexio1_set(csi2, 1); + csi2_irq_ctx_set(csi2, 1); + csi2_irq_status_set(csi2, 1); + + /* Set configuration (timings, format and links) */ + csi2_timing_config(csi2, timing); + csi2_recv_config(csi2, &csi2->ctrl); + csi2_ctx_config(csi2, &csi2->contexts[0]); + + return 0; +} + +/* + * csi2_print_status - Prints CSI2 debug information. + */ +#define CSI2_PRINT_REGISTER(iss, regs, name)\ + dev_dbg(iss->dev, "###CSI2 " #name "=0x%08x\n", \ + readl(regs + CSI2_##name)) + +static void csi2_print_status(struct iss_csi2_device *csi2) +{ + struct iss_device *iss = csi2->iss; + + if (!csi2->available) + return; + + dev_dbg(iss->dev, "-------------CSI2 Register dump-------------\n"); + + CSI2_PRINT_REGISTER(iss, csi2->regs1, SYSCONFIG); + CSI2_PRINT_REGISTER(iss, csi2->regs1, SYSSTATUS); + CSI2_PRINT_REGISTER(iss, csi2->regs1, IRQENABLE); + CSI2_PRINT_REGISTER(iss, csi2->regs1, IRQSTATUS); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTRL); + CSI2_PRINT_REGISTER(iss, csi2->regs1, DBG_H); + CSI2_PRINT_REGISTER(iss, csi2->regs1, COMPLEXIO_CFG); + CSI2_PRINT_REGISTER(iss, csi2->regs1, COMPLEXIO_IRQSTATUS); + CSI2_PRINT_REGISTER(iss, csi2->regs1, SHORT_PACKET); + CSI2_PRINT_REGISTER(iss, csi2->regs1, COMPLEXIO_IRQENABLE); + CSI2_PRINT_REGISTER(iss, csi2->regs1, DBG_P); + CSI2_PRINT_REGISTER(iss, csi2->regs1, TIMING); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_CTRL1(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_CTRL2(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_DAT_OFST(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_PING_ADDR(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_PONG_ADDR(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_IRQENABLE(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_IRQSTATUS(0)); + CSI2_PRINT_REGISTER(iss, csi2->regs1, CTX_CTRL3(0)); + + dev_dbg(iss->dev, "--------------------------------------------\n"); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +/* + * csi2_isr_buffer - Does buffer handling at end-of-frame + * when writing to memory. + */ +static void csi2_isr_buffer(struct iss_csi2_device *csi2) +{ + struct iss_buffer *buffer; + + csi2_ctx_enable(csi2, 0, 0); + + buffer = omap4iss_video_buffer_next(&csi2->video_out, 0); + + /* + * Let video queue operation restart engine if there is an underrun + * condition. + */ + if (buffer == NULL) + return; + + csi2_set_outaddr(csi2, buffer->iss_addr); + csi2_ctx_enable(csi2, 0, 1); +} + +static void csi2_isr_ctx(struct iss_csi2_device *csi2, + struct iss_csi2_ctx_cfg *ctx) +{ + unsigned int n = ctx->ctxnum; + u32 status; + + status = readl(csi2->regs1 + CSI2_CTX_IRQSTATUS(n)); + writel(status, csi2->regs1 + CSI2_CTX_IRQSTATUS(n)); + + /* Propagate frame number */ + if (status & CSI2_CTX_IRQ_FS) { + struct iss_pipeline *pipe = + to_iss_pipeline(&csi2->subdev.entity); + if (pipe->do_propagation) + atomic_inc(&pipe->frame_number); + } + + if (!(status & CSI2_CTX_IRQ_FE)) + return; + + /* Skip interrupts until we reach the frame skip count. The CSI2 will be + * automatically disabled, as the frame skip count has been programmed + * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. + * + * It would have been nice to rely on the FRAME_NUMBER interrupt instead + * but it turned out that the interrupt is only generated when the CSI2 + * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased + * correctly and reaches 0 when data is forwarded to the video port only + * but no interrupt arrives). Maybe a CSI2 hardware bug. + */ + if (csi2->frame_skip) { + csi2->frame_skip--; + if (csi2->frame_skip == 0) { + ctx->format_id = csi2_ctx_map_format(csi2); + csi2_ctx_config(csi2, ctx); + csi2_ctx_enable(csi2, n, 1); + } + return; + } + + if (csi2->output & CSI2_OUTPUT_MEMORY) + csi2_isr_buffer(csi2); +} + +/* + * omap4iss_csi2_isr - CSI2 interrupt handling. + * + * Return -EIO on Transmission error + */ +int omap4iss_csi2_isr(struct iss_csi2_device *csi2) +{ + u32 csi2_irqstatus, cpxio1_irqstatus; + struct iss_device *iss = csi2->iss; + int retval = 0; + + if (!csi2->available) + return -ENODEV; + + csi2_irqstatus = readl(csi2->regs1 + CSI2_IRQSTATUS); + writel(csi2_irqstatus, csi2->regs1 + CSI2_IRQSTATUS); + + /* Failure Cases */ + if (csi2_irqstatus & CSI2_IRQ_COMPLEXIO_ERR) { + cpxio1_irqstatus = readl(csi2->regs1 + + CSI2_COMPLEXIO_IRQSTATUS); + writel(cpxio1_irqstatus, + csi2->regs1 + CSI2_COMPLEXIO_IRQSTATUS); + dev_dbg(iss->dev, "CSI2: ComplexIO Error IRQ " + "%x\n", cpxio1_irqstatus); + retval = -EIO; + } + + if (csi2_irqstatus & (CSI2_IRQ_OCP_ERR | + CSI2_IRQ_SHORT_PACKET | + CSI2_IRQ_ECC_NO_CORRECTION | + CSI2_IRQ_COMPLEXIO_ERR | + CSI2_IRQ_FIFO_OVF)) { + dev_dbg(iss->dev, "CSI2 Err:" + " OCP:%d," + " Short_pack:%d," + " ECC:%d," + " CPXIO:%d," + " FIFO_OVF:%d," + "\n", + (csi2_irqstatus & + CSI2_IRQ_OCP_ERR) ? 1 : 0, + (csi2_irqstatus & + CSI2_IRQ_SHORT_PACKET) ? 1 : 0, + (csi2_irqstatus & + CSI2_IRQ_ECC_NO_CORRECTION) ? 1 : 0, + (csi2_irqstatus & + CSI2_IRQ_COMPLEXIO_ERR) ? 1 : 0, + (csi2_irqstatus & + CSI2_IRQ_FIFO_OVF) ? 1 : 0); + retval = -EIO; + } + + if (omap4iss_module_sync_is_stopping(&csi2->wait, &csi2->stopping)) + return 0; + + /* Successful cases */ + if (csi2_irqstatus & CSI2_IRQ_CONTEXT0) + csi2_isr_ctx(csi2, &csi2->contexts[0]); + + if (csi2_irqstatus & CSI2_IRQ_ECC_CORRECTION) + dev_dbg(iss->dev, "CSI2: ECC correction done\n"); + + return retval; +} + +/* ----------------------------------------------------------------------------- + * ISS video operations + */ + +/* + * csi2_queue - Queues the first buffer when using memory output + * @video: The video node + * @buffer: buffer to queue + */ +static int csi2_queue(struct iss_video *video, struct iss_buffer *buffer) +{ + struct iss_device *iss = video->iss; + struct iss_csi2_device *csi2 = &iss->csi2a; + + csi2_set_outaddr(csi2, buffer->iss_addr); + + /* + * If streaming was enabled before there was a buffer queued + * or underrun happened in the ISR, the hardware was not enabled + * and DMA queue flag ISS_VIDEO_DMAQUEUE_UNDERRUN is still set. + * Enable it now. + */ + if (csi2->video_out.dmaqueue_flags & ISS_VIDEO_DMAQUEUE_UNDERRUN) { + /* Enable / disable context 0 and IRQs */ + csi2_if_enable(csi2, 1); + csi2_ctx_enable(csi2, 0, 1); + iss_video_dmaqueue_flags_clr(&csi2->video_out); + } + + return 0; +} + +static const struct iss_video_operations csi2_issvideo_ops = { + .queue = csi2_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static struct v4l2_mbus_framefmt * +__csi2_get_format(struct iss_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &csi2->formats[pad]; +} + +static void +csi2_try_format(struct iss_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + enum v4l2_mbus_pixelcode pixelcode; + struct v4l2_mbus_framefmt *format; + const struct iss_format_info *info; + unsigned int i; + + switch (pad) { + case CSI2_PAD_SINK: + /* Clamp the width and height to valid range (1-8191). */ + for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) { + if (fmt->code == csi2_input_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(csi2_input_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + break; + + case CSI2_PAD_SOURCE: + /* Source format same as sink format, except for DPCM + * compression. + */ + pixelcode = fmt->code; + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* + * Only Allow DPCM decompression, and check that the + * pattern is preserved + */ + info = omap4iss_video_format_info(fmt->code); + if (info->uncompressed == pixelcode) + fmt->code = pixelcode; + break; + } + + /* RGB, non-interlaced */ + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; +} + +/* + * csi2_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int csi2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + const struct iss_format_info *info; + + if (code->pad == CSI2_PAD_SINK) { + if (code->index >= ARRAY_SIZE(csi2_input_fmts)) + return -EINVAL; + + code->code = csi2_input_fmts[code->index]; + } else { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + switch (code->index) { + case 0: + /* Passthrough sink pad code */ + code->code = format->code; + break; + case 1: + /* Uncompressed code */ + info = omap4iss_video_format_info(format->code); + if (info->uncompressed == format->code) + return -EINVAL; + + code->code = info->uncompressed; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int csi2_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * csi2_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * csi2_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CSI2_PAD_SINK) { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE, + fmt->which); + *format = fmt->format; + csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which); + } + + return 0; +} + +/* + * csi2_init_formats - Initialize formats on all pads + * @sd: ISS CSI2 V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CSI2_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + csi2_set_format(sd, fh, &format); + + return 0; +} + +/* + * csi2_set_stream - Enable/Disable streaming on the CSI2 module + * @sd: ISS CSI2 V4L2 subdevice + * @enable: ISS pipeline stream state + * + * Return 0 on success or a negative error code otherwise. + */ +static int csi2_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct iss_device *iss = csi2->iss; + struct iss_pipeline *pipe = to_iss_pipeline(&csi2->subdev.entity); + struct iss_video *video_out = &csi2->video_out; + + if (csi2->state == ISS_PIPELINE_STREAM_STOPPED) { + if (enable == ISS_PIPELINE_STREAM_STOPPED) + return 0; + + omap4iss_subclk_enable(iss, OMAP4_ISS_SUBCLK_CSI2_A); + } + + switch (enable) { + case ISS_PIPELINE_STREAM_CONTINUOUS: + if (omap4iss_csiphy_acquire(csi2->phy) < 0) + return -ENODEV; + csi2->use_fs_irq = pipe->do_propagation; + csi2_configure(csi2); + csi2_print_status(csi2); + + /* + * When outputting to memory with no buffer available, let the + * buffer queue handler start the hardware. A DMA queue flag + * ISS_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is + * a buffer available. + */ + if (csi2->output & CSI2_OUTPUT_MEMORY && + !(video_out->dmaqueue_flags & ISS_VIDEO_DMAQUEUE_QUEUED)) + break; + /* Enable context 0 and IRQs */ + atomic_set(&csi2->stopping, 0); + csi2_ctx_enable(csi2, 0, 1); + csi2_if_enable(csi2, 1); + iss_video_dmaqueue_flags_clr(video_out); + break; + + case ISS_PIPELINE_STREAM_STOPPED: + if (csi2->state == ISS_PIPELINE_STREAM_STOPPED) + return 0; + if (omap4iss_module_sync_idle(&sd->entity, &csi2->wait, + &csi2->stopping)) + dev_dbg(iss->dev, "%s: module stop timeout.\n", + sd->name); + csi2_ctx_enable(csi2, 0, 0); + csi2_if_enable(csi2, 0); + csi2_irq_ctx_set(csi2, 0); + omap4iss_csiphy_release(csi2->phy); + omap4iss_subclk_disable(iss, OMAP4_ISS_SUBCLK_CSI2_A); + iss_video_dmaqueue_flags_clr(video_out); + break; + } + + csi2->state = enable; + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops csi2_video_ops = { + .s_stream = csi2_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops csi2_pad_ops = { + .enum_mbus_code = csi2_enum_mbus_code, + .enum_frame_size = csi2_enum_frame_size, + .get_fmt = csi2_get_format, + .set_fmt = csi2_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops csi2_ops = { + .video = &csi2_video_ops, + .pad = &csi2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops csi2_internal_ops = { + .open = csi2_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * csi2_link_setup - Setup CSI2 connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int csi2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct iss_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct iss_csi2_ctrl_cfg *ctrl = &csi2->ctrl; + + /* + * The ISS core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + switch (local->index | media_entity_type(remote->entity)) { + case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_MEMORY) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_MEMORY; + } else { + csi2->output &= ~CSI2_OUTPUT_MEMORY; + } + break; + + case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_IPIPEIF) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_IPIPEIF; + } else { + csi2->output &= ~CSI2_OUTPUT_IPIPEIF; + } + break; + + default: + /* Link from camera to CSI2 is fixed... */ + return -EINVAL; + } + + ctrl->vp_only_enable = + (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true; + ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_IPIPEIF); + + return 0; +} + +/* media operations */ +static const struct media_entity_operations csi2_media_ops = { + .link_setup = csi2_link_setup, +}; + +/* + * csi2_init_entities - Initialize subdev and media entity. + * @csi2: Pointer to csi2 structure. + * return -ENOMEM or zero on success + */ +static int csi2_init_entities(struct iss_csi2_device *csi2) +{ + struct v4l2_subdev *sd = &csi2->subdev; + struct media_pad *pads = csi2->pads; + struct media_entity *me = &sd->entity; + int ret; + + v4l2_subdev_init(sd, &csi2_ops); + sd->internal_ops = &csi2_internal_ops; + strlcpy(sd->name, "OMAP4 ISS CSI2a", sizeof(sd->name)); + + sd->grp_id = 1 << 16; /* group ID for iss subdevs */ + v4l2_set_subdevdata(sd, csi2); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + + me->ops = &csi2_media_ops; + ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + csi2_init_formats(sd, NULL); + + /* Video device node */ + csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + csi2->video_out.ops = &csi2_issvideo_ops; + csi2->video_out.bpl_alignment = 32; + csi2->video_out.bpl_zero_padding = 1; + csi2->video_out.bpl_max = 0x1ffe0; + csi2->video_out.iss = csi2->iss; + csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + + ret = omap4iss_video_init(&csi2->video_out, "CSI2a"); + if (ret < 0) + return ret; + + /* Connect the CSI2 subdev to the video node. */ + ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, + &csi2->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap4iss_csi2_unregister_entities(struct iss_csi2_device *csi2) +{ + media_entity_cleanup(&csi2->subdev.entity); + + v4l2_device_unregister_subdev(&csi2->subdev); + omap4iss_video_unregister(&csi2->video_out); +} + +int omap4iss_csi2_register_entities(struct iss_csi2_device *csi2, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &csi2->subdev); + if (ret < 0) + goto error; + + ret = omap4iss_video_register(&csi2->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap4iss_csi2_unregister_entities(csi2); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISS CSI2 initialisation and cleanup + */ + +/* + * omap4iss_csi2_cleanup - Routine for module driver cleanup + */ +void omap4iss_csi2_cleanup(struct iss_device *iss) +{ +} + +/* + * omap4iss_csi2_init - Routine for module driver init + */ +int omap4iss_csi2_init(struct iss_device *iss) +{ + struct iss_csi2_device *csi2a = &iss->csi2a; + int ret; + + csi2a->iss = iss; + csi2a->available = 1; + csi2a->regs1 = iss->regs[OMAP4_ISS_MEM_CSI2_A_REGS1]; + csi2a->phy = &iss->csiphy1; + csi2a->state = ISS_PIPELINE_STREAM_STOPPED; + init_waitqueue_head(&csi2a->wait); + + ret = csi2_init_entities(csi2a); + if (ret < 0) + goto fail; + + return 0; +fail: + omap4iss_csi2_cleanup(iss); + return ret; +} diff --git a/drivers/media/video/omap4iss/iss_csi2.h b/drivers/media/video/omap4iss/iss_csi2.h new file mode 100644 index 0000000..4fa94cf --- /dev/null +++ b/drivers/media/video/omap4iss/iss_csi2.h @@ -0,0 +1,166 @@ +/* + * iss_csi2.h + * + * TI OMAP4 ISS - CSI2 module + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP4_ISS_CSI2_H +#define OMAP4_ISS_CSI2_H + +#include <linux/types.h> +#include <linux/videodev2.h> + +#include "iss_video.h" + +struct iss_csiphy; + +/* This is not an exhaustive list */ +enum iss_csi2_pix_formats { + CSI2_PIX_FMT_OTHERS = 0, + CSI2_PIX_FMT_YUV422_8BIT = 0x1e, + CSI2_PIX_FMT_YUV422_8BIT_VP = 0x9e, + CSI2_PIX_FMT_RAW10_EXP16 = 0xab, + CSI2_PIX_FMT_RAW10_EXP16_VP = 0x12f, + CSI2_PIX_FMT_RAW8 = 0x2a, + CSI2_PIX_FMT_RAW8_DPCM10_EXP16 = 0x2aa, + CSI2_PIX_FMT_RAW8_DPCM10_VP = 0x32a, + CSI2_PIX_FMT_RAW8_VP = 0x12a, + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP = 0x340, + CSI2_USERDEF_8BIT_DATA1_DPCM10 = 0x2c0, + CSI2_USERDEF_8BIT_DATA1 = 0x40, +}; + +enum iss_csi2_irqevents { + OCP_ERR_IRQ = 0x4000, + SHORT_PACKET_IRQ = 0x2000, + ECC_CORRECTION_IRQ = 0x1000, + ECC_NO_CORRECTION_IRQ = 0x800, + COMPLEXIO2_ERR_IRQ = 0x400, + COMPLEXIO1_ERR_IRQ = 0x200, + FIFO_OVF_IRQ = 0x100, + CONTEXT7 = 0x80, + CONTEXT6 = 0x40, + CONTEXT5 = 0x20, + CONTEXT4 = 0x10, + CONTEXT3 = 0x8, + CONTEXT2 = 0x4, + CONTEXT1 = 0x2, + CONTEXT0 = 0x1, +}; + +enum iss_csi2_ctx_irqevents { + CTX_ECC_CORRECTION = 0x100, + CTX_LINE_NUMBER = 0x80, + CTX_FRAME_NUMBER = 0x40, + CTX_CS = 0x20, + CTX_LE = 0x8, + CTX_LS = 0x4, + CTX_FE = 0x2, + CTX_FS = 0x1, +}; + +enum iss_csi2_frame_mode { + ISS_CSI2_FRAME_IMMEDIATE, + ISS_CSI2_FRAME_AFTERFEC, +}; + +#define ISS_CSI2_MAX_CTX_NUM 7 + +struct iss_csi2_ctx_cfg { + u8 ctxnum; /* context number 0 - 7 */ + u8 dpcm_decompress; + + /* Fields in CSI2_CTx_CTRL2 - locked by CSI2_CTx_CTRL1.CTX_EN */ + u8 virtual_id; + u16 format_id; /* as in CSI2_CTx_CTRL2[9:0] */ + u8 dpcm_predictor; /* 1: simple, 0: advanced */ + + /* Fields in CSI2_CTx_CTRL1/3 - Shadowed */ + u16 alpha; + u16 data_offset; + u32 ping_addr; + u32 pong_addr; + u8 eof_enabled; + u8 eol_enabled; + u8 checksum_enabled; + u8 enabled; +}; + +struct iss_csi2_timing_cfg { + u8 ionum; /* IO1 or IO2 as in CSI2_TIMING */ + unsigned force_rx_mode:1; + unsigned stop_state_16x:1; + unsigned stop_state_4x:1; + u16 stop_state_counter; +}; + +struct iss_csi2_ctrl_cfg { + bool vp_clk_enable; + bool vp_only_enable; + u8 vp_out_ctrl; + enum iss_csi2_frame_mode frame_mode; + bool ecc_enable; + bool if_enable; +}; + +#define CSI2_PAD_SINK 0 +#define CSI2_PAD_SOURCE 1 +#define CSI2_PADS_NUM 2 + +#define CSI2_OUTPUT_IPIPEIF (1 << 0) +#define CSI2_OUTPUT_MEMORY (1 << 1) + +struct iss_csi2_device { + struct v4l2_subdev subdev; + struct media_pad pads[CSI2_PADS_NUM]; + struct v4l2_mbus_framefmt formats[CSI2_PADS_NUM]; + + struct iss_video video_out; + struct iss_device *iss; + + u8 available; /* Is the IP present on the silicon? */ + + /* Pointer to register remaps into kernel space */ + void __iomem *regs1; + void __iomem *regs2; + + u32 output; /* output to IPIPEIF, memory or both? */ + bool dpcm_decompress; + unsigned int frame_skip; + bool use_fs_irq; + + struct iss_csiphy *phy; + struct iss_csi2_ctx_cfg contexts[ISS_CSI2_MAX_CTX_NUM + 1]; + struct iss_csi2_timing_cfg timing[2]; + struct iss_csi2_ctrl_cfg ctrl; + enum iss_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; +}; + +int omap4iss_csi2_isr(struct iss_csi2_device *csi2); +int omap4iss_csi2_reset(struct iss_csi2_device *csi2); +int omap4iss_csi2_init(struct iss_device *iss); +void omap4iss_csi2_cleanup(struct iss_device *iss); +void omap4iss_csi2_unregister_entities(struct iss_csi2_device *csi2); +int omap4iss_csi2_register_entities(struct iss_csi2_device *csi2, + struct v4l2_device *vdev); +#endif /* OMAP4_ISS_CSI2_H */ diff --git a/drivers/media/video/omap4iss/iss_csiphy.c b/drivers/media/video/omap4iss/iss_csiphy.c new file mode 100644 index 0000000..9545622 --- /dev/null +++ b/drivers/media/video/omap4iss/iss_csiphy.c @@ -0,0 +1,215 @@ +/* + * iss_csiphy.c + * + * TI OMAP4 ISS - CSI PHY module + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> + +#include "iss.h" +#include "iss_regs.h" +#include "iss_csiphy.h" + +/* + * csiphy_lanes_config - Configuration of CSIPHY lanes. + * + * Updates HW configuration. + * Called with phy->mutex taken. + */ +static void csiphy_lanes_config(struct iss_csiphy *phy) +{ + unsigned int i; + u32 reg; + + reg = readl(phy->cfg_regs + CSI2_COMPLEXIO_CFG); + + for (i = 0; i < phy->num_data_lanes; i++) { + reg &= ~(CSI2_COMPLEXIO_CFG_DATA_POL(i + 1) | + CSI2_COMPLEXIO_CFG_DATA_POSITION_MASK(i + 1)); + reg |= (phy->lanes.data[i].pol ? + CSI2_COMPLEXIO_CFG_DATA_POL(i + 1) : 0); + reg |= (phy->lanes.data[i].pos << + CSI2_COMPLEXIO_CFG_DATA_POSITION_SHIFT(i + 1)); + } + + reg &= ~(CSI2_COMPLEXIO_CFG_CLOCK_POL | + CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK); + reg |= phy->lanes.clk.pol ? CSI2_COMPLEXIO_CFG_CLOCK_POL : 0; + reg |= phy->lanes.clk.pos << CSI2_COMPLEXIO_CFG_CLOCK_POSITION_SHIFT; + + writel(reg, phy->cfg_regs + CSI2_COMPLEXIO_CFG); +} + +/* + * csiphy_set_power + * @power: Power state to be set. + * + * Returns 0 if successful, or -EBUSY if the retry count is exceeded. + */ +static int csiphy_set_power(struct iss_csiphy *phy, u32 power) +{ + u32 reg; + u8 retry_count; + + writel((readl(phy->cfg_regs + CSI2_COMPLEXIO_CFG) & + ~CSI2_COMPLEXIO_CFG_PWD_CMD_MASK) | + power, + phy->cfg_regs + CSI2_COMPLEXIO_CFG); + + retry_count = 0; + do { + udelay(50); + reg = readl(phy->cfg_regs + CSI2_COMPLEXIO_CFG) & + CSI2_COMPLEXIO_CFG_PWD_STATUS_MASK; + + if (reg != power >> 2) + retry_count++; + + } while ((reg != power >> 2) && (retry_count < 100)); + + if (retry_count == 100) { + printk(KERN_ERR "CSI2 CIO set power failed!\n"); + return -EBUSY; + } + + return 0; +} + +/* + * csiphy_dphy_config - Configure CSI2 D-PHY parameters. + * + * Called with phy->mutex taken. + */ +static void csiphy_dphy_config(struct iss_csiphy *phy) +{ + u32 reg; + + /* Set up REGISTER0 */ + reg = readl(phy->phy_regs + REGISTER0); + + reg &= ~(REGISTER0_THS_TERM_MASK | + REGISTER0_THS_SETTLE_MASK); + reg |= phy->dphy.ths_term << REGISTER0_THS_TERM_SHIFT; + reg |= phy->dphy.ths_settle << REGISTER0_THS_SETTLE_SHIFT; + + writel(reg, phy->phy_regs + REGISTER0); + + /* Set up REGISTER1 */ + reg = readl(phy->phy_regs + REGISTER1); + + reg &= ~(REGISTER1_TCLK_TERM_MASK | + REGISTER1_CTRLCLK_DIV_FACTOR_MASK | + REGISTER1_TCLK_SETTLE_MASK); + reg |= phy->dphy.tclk_term << REGISTER1_TCLK_TERM_SHIFT; + reg |= phy->dphy.tclk_miss << REGISTER1_CTRLCLK_DIV_FACTOR_SHIFT; + reg |= phy->dphy.tclk_settle << REGISTER1_TCLK_SETTLE_SHIFT; + + writel(reg, phy->phy_regs + REGISTER1); +} + +static int csiphy_config(struct iss_csiphy *phy, + struct iss_csiphy_dphy_cfg *dphy, + struct iss_csiphy_lanes_cfg *lanes) +{ + unsigned int used_lanes = 0; + unsigned int i; + + /* Clock and data lanes verification */ + for (i = 0; i < phy->num_data_lanes; i++) { + if (lanes->data[i].pos == 0) + continue; + + if (lanes->data[i].pol > 1 || lanes->data[i].pos > 5) + return -EINVAL; + + if (used_lanes & (1 << lanes->data[i].pos)) + return -EINVAL; + + used_lanes |= 1 << lanes->data[i].pos; + } + + if (lanes->clk.pol > 1 || lanes->clk.pos > 4) + return -EINVAL; + + if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos)) + return -EINVAL; + + mutex_lock(&phy->mutex); + phy->dphy = *dphy; + phy->lanes = *lanes; + mutex_unlock(&phy->mutex); + + return 0; +} + +int omap4iss_csiphy_acquire(struct iss_csiphy *phy) +{ + int rval; + + mutex_lock(&phy->mutex); + + rval = omap4iss_csi2_reset(phy->csi2); + if (rval) + goto done; + + csiphy_dphy_config(phy); + csiphy_lanes_config(phy); + + rval = csiphy_set_power(phy, CSI2_COMPLEXIO_CFG_PWD_CMD_ON); + if (rval) + goto done; + + phy->phy_in_use = 1; + +done: + mutex_unlock(&phy->mutex); + return rval; +} + +void omap4iss_csiphy_release(struct iss_csiphy *phy) +{ + mutex_lock(&phy->mutex); + if (phy->phy_in_use) { + csiphy_set_power(phy, CSI2_COMPLEXIO_CFG_PWD_CMD_OFF); + phy->phy_in_use = 0; + } + mutex_unlock(&phy->mutex); +} + +/* + * omap4iss_csiphy_init - Initialize the CSI PHY frontends + */ +int omap4iss_csiphy_init(struct iss_device *iss) +{ + struct iss_csiphy *phy1 = &iss->csiphy1; + + iss->platform_cb.csiphy_config = csiphy_config; + + phy1->iss = iss; + phy1->csi2 = &iss->csi2a; + phy1->num_data_lanes = ISS_CSIPHY1_NUM_DATA_LANES; + phy1->cfg_regs = iss->regs[OMAP4_ISS_MEM_CSI2_A_REGS1]; + phy1->phy_regs = iss->regs[OMAP4_ISS_MEM_CAMERARX_CORE1]; + mutex_init(&phy1->mutex); + + return 0; +} diff --git a/drivers/media/video/omap4iss/iss_csiphy.h b/drivers/media/video/omap4iss/iss_csiphy.h new file mode 100644 index 0000000..c513ba8 --- /dev/null +++ b/drivers/media/video/omap4iss/iss_csiphy.h @@ -0,0 +1,69 @@ +/* + * iss_csiphy.h + * + * TI OMAP4 ISS - CSI PHY module + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP4_ISS_CSI_PHY_H +#define OMAP4_ISS_CSI_PHY_H + +struct iss_csi2_device; + +struct csiphy_lane { + u8 pos; + u8 pol; +}; + +#define ISS_CSIPHY1_NUM_DATA_LANES 4 + +struct iss_csiphy_lanes_cfg { + struct csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES]; + struct csiphy_lane clk; +}; + +struct iss_csiphy_dphy_cfg { + u8 ths_term; + u8 ths_settle; + u8 tclk_term; + unsigned tclk_miss:1; + u8 tclk_settle; +}; + +struct iss_csiphy { + struct iss_device *iss; + struct mutex mutex; /* serialize csiphy configuration */ + u8 phy_in_use; + struct iss_csi2_device *csi2; + + /* Pointer to register remaps into kernel space */ + void __iomem *cfg_regs; + void __iomem *phy_regs; + + u8 num_data_lanes; /* number of CSI2 Data Lanes supported */ + struct iss_csiphy_lanes_cfg lanes; + struct iss_csiphy_dphy_cfg dphy; +}; + +int omap4iss_csiphy_acquire(struct iss_csiphy *phy); +void omap4iss_csiphy_release(struct iss_csiphy *phy); +int omap4iss_csiphy_init(struct iss_device *iss); + +#endif /* OMAP4_ISS_CSI_PHY_H */ diff --git a/drivers/media/video/omap4iss/iss_regs.h b/drivers/media/video/omap4iss/iss_regs.h new file mode 100644 index 0000000..0bd70ac --- /dev/null +++ b/drivers/media/video/omap4iss/iss_regs.h @@ -0,0 +1,238 @@ +/* + * iss_regs.h + * + * Copyright (C) 2011 Texas Instruments. + * + * Author: Sergio Aguirre <saaguirre@xxxxxx> + */ + +#ifndef _OMAP4_ISS_REGS_H_ +#define _OMAP4_ISS_REGS_H_ + +/* ISS */ +#define ISS_HL_REVISION (0x0) + +#define ISS_HL_SYSCONFIG (0x10) +#define ISS_HL_SYSCONFIG_IDLEMODE_SHIFT 2 +#define ISS_HL_SYSCONFIG_IDLEMODE_FORCEIDLE 0x0 +#define ISS_HL_SYSCONFIG_IDLEMODE_NOIDLE 0x1 +#define ISS_HL_SYSCONFIG_IDLEMODE_SMARTIDLE 0x2 +#define ISS_HL_SYSCONFIG_SOFTRESET (1 << 0) + +#define ISS_HL_IRQSTATUS_5 (0x24 + (0x10 * 5)) +#define ISS_HL_IRQENABLE_5_SET (0x28 + (0x10 * 5)) +#define ISS_HL_IRQENABLE_5_CLR (0x2C + (0x10 * 5)) + +#define ISS_HL_IRQ_BTE (1 << 11) +#define ISS_HL_IRQ_CBUFF (1 << 10) +#define ISS_HL_IRQ_CSIA (1 << 4) + +#define ISS_CTRL (0x80) + +#define ISS_CLKCTRL (0x84) +#define ISS_CLKCTRL_VPORT2_CLK (1 << 30) +#define ISS_CLKCTRL_VPORT1_CLK (1 << 29) +#define ISS_CLKCTRL_VPORT0_CLK (1 << 28) +#define ISS_CLKCTRL_CCP2 (1 << 4) +#define ISS_CLKCTRL_CSI2_B (1 << 3) +#define ISS_CLKCTRL_CSI2_A (1 << 2) +#define ISS_CLKCTRL_ISP (1 << 1) +#define ISS_CLKCTRL_SIMCOP (1 << 0) + +#define ISS_CLKSTAT (0x88) +#define ISS_CLKSTAT_VPORT2_CLK (1 << 30) +#define ISS_CLKSTAT_VPORT1_CLK (1 << 29) +#define ISS_CLKSTAT_VPORT0_CLK (1 << 28) +#define ISS_CLKSTAT_CCP2 (1 << 4) +#define ISS_CLKSTAT_CSI2_B (1 << 3) +#define ISS_CLKSTAT_CSI2_A (1 << 2) +#define ISS_CLKSTAT_ISP (1 << 1) +#define ISS_CLKSTAT_SIMCOP (1 << 0) + +#define ISS_PM_STATUS (0x8C) +#define ISS_PM_STATUS_CBUFF_PM_MASK (3 << 12) +#define ISS_PM_STATUS_BTE_PM_MASK (3 << 10) +#define ISS_PM_STATUS_SIMCOP_PM_MASK (3 << 8) +#define ISS_PM_STATUS_ISP_PM_MASK (3 << 6) +#define ISS_PM_STATUS_CCP2_PM_MASK (3 << 4) +#define ISS_PM_STATUS_CSI2_B_PM_MASK (3 << 2) +#define ISS_PM_STATUS_CSI2_A_PM_MASK (3 << 0) + +#define REGISTER0 (0x0) +#define REGISTER0_HSCLOCKCONFIG (1 << 24) +#define REGISTER0_THS_TERM_MASK (0xFF << 8) +#define REGISTER0_THS_TERM_SHIFT 8 +#define REGISTER0_THS_SETTLE_MASK (0xFF << 0) +#define REGISTER0_THS_SETTLE_SHIFT 0 + +#define REGISTER1 (0x4) +#define REGISTER1_RESET_DONE_CTRLCLK (1 << 29) +#define REGISTER1_CLOCK_MISS_DETECTOR_STATUS (1 << 25) +#define REGISTER1_TCLK_TERM_MASK (0x3F << 18) +#define REGISTER1_TCLK_TERM_SHIFT 18 +#define REGISTER1_DPHY_HS_SYNC_PATTERN_MASK (0xFF << 10) +#define REGISTER1_CTRLCLK_DIV_FACTOR_MASK (0x3 << 8) +#define REGISTER1_CTRLCLK_DIV_FACTOR_SHIFT 8 +#define REGISTER1_TCLK_SETTLE_MASK (0xFF << 0) +#define REGISTER1_TCLK_SETTLE_SHIFT 0 + +#define REGISTER2 (0x8) + +#define CSI2_SYSCONFIG (0x10) +#define CSI2_SYSCONFIG_MSTANDBY_MODE_MASK (3 << 12) +#define CSI2_SYSCONFIG_MSTANDBY_MODE_FORCE (0 << 12) +#define CSI2_SYSCONFIG_MSTANDBY_MODE_NO (1 << 12) +#define CSI2_SYSCONFIG_MSTANDBY_MODE_SMART (2 << 12) +#define CSI2_SYSCONFIG_SOFT_RESET (1 << 1) +#define CSI2_SYSCONFIG_AUTO_IDLE (1 << 0) + +#define CSI2_SYSSTATUS (0x14) +#define CSI2_SYSSTATUS_RESET_DONE (1 << 0) + +#define CSI2_IRQSTATUS (0x18) +#define CSI2_IRQENABLE (0x1C) + +/* Shared bits across CSI2_IRQENABLE and IRQSTATUS */ + +#define CSI2_IRQ_OCP_ERR (1 << 14) +#define CSI2_IRQ_SHORT_PACKET (1 << 13) +#define CSI2_IRQ_ECC_CORRECTION (1 << 12) +#define CSI2_IRQ_ECC_NO_CORRECTION (1 << 11) +#define CSI2_IRQ_COMPLEXIO_ERR (1 << 9) +#define CSI2_IRQ_FIFO_OVF (1 << 8) +#define CSI2_IRQ_CONTEXT0 (1 << 0) + +#define CSI2_CTRL (0x40) +#define CSI2_CTRL_MFLAG_LEVH_MASK (7 << 20) +#define CSI2_CTRL_MFLAG_LEVH_SHIFT 20 +#define CSI2_CTRL_MFLAG_LEVL_MASK (7 << 17) +#define CSI2_CTRL_MFLAG_LEVL_SHIFT 17 +#define CSI2_CTRL_BURST_SIZE_EXPAND (1 << 16) +#define CSI2_CTRL_VP_CLK_EN (1 << 15) +#define CSI2_CTRL_NON_POSTED_WRITE (1 << 13) +#define CSI2_CTRL_VP_ONLY_EN (1 << 11) +#define CSI2_CTRL_VP_OUT_CTRL_MASK (3 << 8) +#define CSI2_CTRL_VP_OUT_CTRL_SHIFT 8 +#define CSI2_CTRL_DBG_EN (1 << 7) +#define CSI2_CTRL_BURST_SIZE_MASK (3 << 5) +#define CSI2_CTRL_ENDIANNESS (1 << 4) +#define CSI2_CTRL_FRAME (1 << 3) +#define CSI2_CTRL_ECC_EN (1 << 2) +#define CSI2_CTRL_IF_EN (1 << 0) + +#define CSI2_DBG_H (0x44) + +#define CSI2_COMPLEXIO_CFG (0x50) +#define CSI2_COMPLEXIO_CFG_RESET_CTRL (1 << 30) +#define CSI2_COMPLEXIO_CFG_RESET_DONE (1 << 29) +#define CSI2_COMPLEXIO_CFG_PWD_CMD_MASK (3 << 27) +#define CSI2_COMPLEXIO_CFG_PWD_CMD_OFF (0 << 27) +#define CSI2_COMPLEXIO_CFG_PWD_CMD_ON (1 << 27) +#define CSI2_COMPLEXIO_CFG_PWD_CMD_ULP (2 << 27) +#define CSI2_COMPLEXIO_CFG_PWD_STATUS_MASK (3 << 25) +#define CSI2_COMPLEXIO_CFG_PWD_STATUS_OFF (0 << 25) +#define CSI2_COMPLEXIO_CFG_PWD_STATUS_ON (1 << 25) +#define CSI2_COMPLEXIO_CFG_PWD_STATUS_ULP (2 << 25) +#define CSI2_COMPLEXIO_CFG_PWR_AUTO (1 << 24) +#define CSI2_COMPLEXIO_CFG_DATA_POL(i) (1 << (((i) * 4) + 3)) +#define CSI2_COMPLEXIO_CFG_DATA_POSITION_MASK(i) (7 << ((i) * 4)) +#define CSI2_COMPLEXIO_CFG_DATA_POSITION_SHIFT(i) ((i) * 4) +#define CSI2_COMPLEXIO_CFG_CLOCK_POL (1 << 3) +#define CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK (7 << 0) +#define CSI2_COMPLEXIO_CFG_CLOCK_POSITION_SHIFT 0 + +#define CSI2_COMPLEXIO_IRQSTATUS (0x54) + +#define CSI2_SHORT_PACKET (0x5C) + +#define CSI2_COMPLEXIO_IRQENABLE (0x60) + +/* Shared bits across CSI2_COMPLEXIO_IRQENABLE and IRQSTATUS */ +#define CSI2_COMPLEXIO_IRQ_STATEALLULPMEXIT (1 << 26) +#define CSI2_COMPLEXIO_IRQ_STATEALLULPMENTER (1 << 25) +#define CSI2_COMPLEXIO_IRQ_STATEULPM5 (1 << 24) +#define CSI2_COMPLEXIO_IRQ_STATEULPM4 (1 << 23) +#define CSI2_COMPLEXIO_IRQ_STATEULPM3 (1 << 22) +#define CSI2_COMPLEXIO_IRQ_STATEULPM2 (1 << 21) +#define CSI2_COMPLEXIO_IRQ_STATEULPM1 (1 << 20) +#define CSI2_COMPLEXIO_IRQ_ERRCONTROL5 (1 << 19) +#define CSI2_COMPLEXIO_IRQ_ERRCONTROL4 (1 << 18) +#define CSI2_COMPLEXIO_IRQ_ERRCONTROL3 (1 << 17) +#define CSI2_COMPLEXIO_IRQ_ERRCONTROL2 (1 << 16) +#define CSI2_COMPLEXIO_IRQ_ERRCONTROL1 (1 << 15) +#define CSI2_COMPLEXIO_IRQ_ERRESC5 (1 << 14) +#define CSI2_COMPLEXIO_IRQ_ERRESC4 (1 << 13) +#define CSI2_COMPLEXIO_IRQ_ERRESC3 (1 << 12) +#define CSI2_COMPLEXIO_IRQ_ERRESC2 (1 << 11) +#define CSI2_COMPLEXIO_IRQ_ERRESC1 (1 << 10) +#define CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS5 (1 << 9) +#define CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS4 (1 << 8) +#define CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS3 (1 << 7) +#define CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS2 (1 << 6) +#define CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS1 (1 << 5) +#define CSI2_COMPLEXIO_IRQ_ERRSOTHS5 (1 << 4) +#define CSI2_COMPLEXIO_IRQ_ERRSOTHS4 (1 << 3) +#define CSI2_COMPLEXIO_IRQ_ERRSOTHS3 (1 << 2) +#define CSI2_COMPLEXIO_IRQ_ERRSOTHS2 (1 << 1) +#define CSI2_COMPLEXIO_IRQ_ERRSOTHS1 (1 << 0) + +#define CSI2_DBG_P (0x68) + +#define CSI2_TIMING (0x6C) +#define CSI2_TIMING_FORCE_RX_MODE_IO1 (1 << 15) +#define CSI2_TIMING_STOP_STATE_X16_IO1 (1 << 14) +#define CSI2_TIMING_STOP_STATE_X4_IO1 (1 << 13) +#define CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK (0x1FFF << 0) +#define CSI2_TIMING_STOP_STATE_COUNTER_IO1_SHIFT 0 + +#define CSI2_CTX_CTRL1(i) (0x70 + (0x20 * i)) +#define CSI2_CTX_CTRL1_GENERIC (1 << 30) +#define CSI2_CTX_CTRL1_TRANSCODE (0xF << 24) +#define CSI2_CTX_CTRL1_FEC_NUMBER_MASK (0xFF << 16) +#define CSI2_CTX_CTRL1_COUNT_MASK (0xFF << 8) +#define CSI2_CTX_CTRL1_COUNT_SHIFT 8 +#define CSI2_CTX_CTRL1_EOF_EN (1 << 7) +#define CSI2_CTX_CTRL1_EOL_EN (1 << 6) +#define CSI2_CTX_CTRL1_CS_EN (1 << 5) +#define CSI2_CTX_CTRL1_COUNT_UNLOCK (1 << 4) +#define CSI2_CTX_CTRL1_PING_PONG (1 << 3) +#define CSI2_CTX_CTRL1_CTX_EN (1 << 0) + +#define CSI2_CTX_CTRL2(i) (0x74 + (0x20 * i)) +#define CSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT 13 +#define CSI2_CTX_CTRL2_USER_DEF_MAP_MASK \ + (0x3 << CSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT) +#define CSI2_CTX_CTRL2_VIRTUAL_ID_MASK (3 << 11) +#define CSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT 11 +#define CSI2_CTX_CTRL2_DPCM_PRED (1 << 10) +#define CSI2_CTX_CTRL2_FORMAT_MASK (0x3FF << 0) +#define CSI2_CTX_CTRL2_FORMAT_SHIFT 0 + +#define CSI2_CTX_DAT_OFST(i) (0x78 + (0x20 * i)) +#define CSI2_CTX_DAT_OFST_MASK (0xFFF << 5) + +#define CSI2_CTX_PING_ADDR(i) (0x7C + (0x20 * i)) +#define CSI2_CTX_PING_ADDR_MASK 0xFFFFFFE0 + +#define CSI2_CTX_PONG_ADDR(i) (0x80 + (0x20 * i)) +#define CSI2_CTX_PONG_ADDR_MASK CSI2_CTX_PING_ADDR_MASK + +#define CSI2_CTX_IRQENABLE(i) (0x84 + (0x20 * i)) +#define CSI2_CTX_IRQSTATUS(i) (0x88 + (0x20 * i)) + +#define CSI2_CTX_CTRL3(i) (0x8C + (0x20 * i)) +#define CSI2_CTX_CTRL3_ALPHA_SHIFT 5 +#define CSI2_CTX_CTRL3_ALPHA_MASK \ + (0x3fff << CSI2_CTX_CTRL3_ALPHA_SHIFT) + +/* Shared bits across CSI2_CTX_IRQENABLE and IRQSTATUS */ +#define CSI2_CTX_IRQ_ECC_CORRECTION (1 << 8) +#define CSI2_CTX_IRQ_LINE_NUMBER (1 << 7) +#define CSI2_CTX_IRQ_FRAME_NUMBER (1 << 6) +#define CSI2_CTX_IRQ_CS (1 << 5) +#define CSI2_CTX_IRQ_LE (1 << 3) +#define CSI2_CTX_IRQ_LS (1 << 2) +#define CSI2_CTX_IRQ_FE (1 << 1) +#define CSI2_CTX_IRQ_FS (1 << 0) + +#endif /* _OMAP4_CAMERA_REGS_H_ */ diff --git a/drivers/media/video/omap4iss/iss_video.c b/drivers/media/video/omap4iss/iss_video.c new file mode 100644 index 0000000..3248711 --- /dev/null +++ b/drivers/media/video/omap4iss/iss_video.c @@ -0,0 +1,1192 @@ +/* + * iss_video.c + * + * TI OMAP4 ISS - Generic video node + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <asm/cacheflush.h> +#include <linux/clk.h> +#include <linux/mm.h> +#include <linux/pagemap.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <plat/omap-pm.h> + +#include "iss_video.h" +#include "iss.h" + + +/* ----------------------------------------------------------------------------- + * Helper functions + */ + +static struct iss_format_info formats[] = { + { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, + V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_GREY, 8, }, + { V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y10, 10, }, + { V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y12, 12, }, + { V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR8, 8, }, + { V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG8, 8, }, + { V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG8, 8, }, + { V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB8, 8, }, + { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, + V4L2_MBUS_FMT_SGRBG10_1X10, 0, + V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, + { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR10, 10, }, + { V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG10, 10, }, + { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG10, 10, }, + { V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB10, 10, }, + { V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR12, 12, }, + { V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG12, 12, }, + { V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG12, 12, }, + { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB12, 12, }, + { V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_UYVY8_1X16, 0, + V4L2_PIX_FMT_UYVY, 16, }, + { V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, 0, + V4L2_PIX_FMT_YUYV, 16, }, +}; + +const struct iss_format_info * +omap4iss_video_format_info(enum v4l2_mbus_pixelcode code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].code == code) + return &formats[i]; + } + + return NULL; +} + +/* + * iss_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format + * @video: ISS video instance + * @mbus: v4l2_mbus_framefmt format (input) + * @pix: v4l2_pix_format format (output) + * + * Fill the output pix structure with information from the input mbus format. + * The bytesperline and sizeimage fields are computed from the requested bytes + * per line value in the pix format and information from the video instance. + * + * Return the number of padding bytes at end of line. + */ +static unsigned int iss_video_mbus_to_pix(const struct iss_video *video, + const struct v4l2_mbus_framefmt *mbus, + struct v4l2_pix_format *pix) +{ + unsigned int bpl = pix->bytesperline; + unsigned int min_bpl; + unsigned int i; + + memset(pix, 0, sizeof(*pix)); + pix->width = mbus->width; + pix->height = mbus->height; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].code == mbus->code) + break; + } + + if (WARN_ON(i == ARRAY_SIZE(formats))) + return 0; + + min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8; + + /* Clamp the requested bytes per line value. If the maximum bytes per + * line value is zero, the module doesn't support user configurable line + * sizes. Override the requested value with the minimum in that case. + */ + if (video->bpl_max) + bpl = clamp(bpl, min_bpl, video->bpl_max); + else + bpl = min_bpl; + + if (!video->bpl_zero_padding || bpl != min_bpl) + bpl = ALIGN(bpl, video->bpl_alignment); + + pix->pixelformat = formats[i].pixelformat; + pix->bytesperline = bpl; + pix->sizeimage = pix->bytesperline * pix->height; + pix->colorspace = mbus->colorspace; + pix->field = mbus->field; + + return bpl - min_bpl; +} + +static void iss_video_pix_to_mbus(const struct v4l2_pix_format *pix, + struct v4l2_mbus_framefmt *mbus) +{ + unsigned int i; + + memset(mbus, 0, sizeof(*mbus)); + mbus->width = pix->width; + mbus->height = pix->height; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].pixelformat == pix->pixelformat) + break; + } + + if (WARN_ON(i == ARRAY_SIZE(formats))) + return; + + mbus->code = formats[i].code; + mbus->colorspace = pix->colorspace; + mbus->field = pix->field; +} + +static struct v4l2_subdev * +iss_video_remote_subdev(struct iss_video *video, u32 *pad) +{ + struct media_pad *remote; + + remote = media_entity_remote_source(&video->pad); + + if (remote == NULL || + media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + return NULL; + + if (pad) + *pad = remote->index; + + return media_entity_to_v4l2_subdev(remote->entity); +} + +/* Return a pointer to the ISS video instance at the far end of the pipeline. */ +static struct iss_video * +iss_video_far_end(struct iss_video *video) +{ + struct media_entity_graph graph; + struct media_entity *entity = &video->video.entity; + struct media_device *mdev = entity->parent; + struct iss_video *far_end = NULL; + + mutex_lock(&mdev->graph_mutex); + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + if (entity == &video->video.entity) + continue; + + if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) + continue; + + far_end = to_iss_video(media_entity_to_video_device(entity)); + if (far_end->type != video->type) + break; + + far_end = NULL; + } + + mutex_unlock(&mdev->graph_mutex); + return far_end; +} + +/* + * Validate a pipeline by checking both ends of all links for format + * discrepancies. + * + * Compute the minimum time per frame value as the maximum of time per frame + * limits reported by every block in the pipeline. + * + * Return 0 if all formats match, or -EPIPE if at least one link is found with + * different formats on its two ends. + */ +static int iss_video_validate_pipeline(struct iss_pipeline *pipe) +{ + struct v4l2_subdev_format fmt_source; + struct v4l2_subdev_format fmt_sink; + struct media_pad *pad; + struct v4l2_subdev *subdev; + int ret; + + subdev = iss_video_remote_subdev(pipe->output, NULL); + if (subdev == NULL) + return -EPIPE; + + while (1) { + /* Retrieve the sink format */ + pad = &subdev->entity.pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + fmt_sink.pad = pad->index; + fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_sink); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + /* Retrieve the source format */ + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + subdev = media_entity_to_v4l2_subdev(pad->entity); + + fmt_source.pad = pad->index; + fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + /* Check if the two ends match */ + if (fmt_source.format.width != fmt_sink.format.width || + fmt_source.format.height != fmt_sink.format.height) + return -EPIPE; + + if (fmt_source.format.code != fmt_sink.format.code) + return -EPIPE; + } + + return 0; +} + +static int +__iss_video_get_format(struct iss_video *video, struct v4l2_format *format) +{ + struct v4l2_subdev_format fmt; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + subdev = iss_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + + fmt.pad = pad; + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); + if (ret == -ENOIOCTLCMD) + ret = -EINVAL; + + mutex_unlock(&video->mutex); + + if (ret) + return ret; + + format->type = video->type; + return iss_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix); +} + +static int +iss_video_check_format(struct iss_video *video, struct iss_video_fh *vfh) +{ + struct v4l2_format format; + int ret; + + memcpy(&format, &vfh->format, sizeof(format)); + ret = __iss_video_get_format(video, &format); + if (ret < 0) + return ret; + + if (vfh->format.fmt.pix.pixelformat != format.fmt.pix.pixelformat || + vfh->format.fmt.pix.height != format.fmt.pix.height || + vfh->format.fmt.pix.width != format.fmt.pix.width || + vfh->format.fmt.pix.bytesperline != format.fmt.pix.bytesperline || + vfh->format.fmt.pix.sizeimage != format.fmt.pix.sizeimage) + return -EINVAL; + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Video queue operations + */ + +static int iss_video_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *count, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct iss_video_fh *vfh = vb2_get_drv_priv(vq); + struct iss_video *video = vfh->video; + + /* Revisit multi-planar support for NV12 */ + *num_planes = 1; + + sizes[0] = vfh->format.fmt.pix.sizeimage; + if (sizes[0] == 0) + return -EINVAL; + + alloc_ctxs[0] = video->alloc_ctx; + + *count = min(*count, (unsigned int)(video->capture_mem / PAGE_ALIGN(sizes[0]))); + + return 0; +} + +static void iss_video_buf_cleanup(struct vb2_buffer *vb) +{ + struct iss_buffer *buffer = container_of(vb, struct iss_buffer, vb); + + if (buffer->iss_addr) + buffer->iss_addr = 0; +} + +static int iss_video_buf_prepare(struct vb2_buffer *vb) +{ + struct iss_video_fh *vfh = vb2_get_drv_priv(vb->vb2_queue); + struct iss_buffer *buffer = container_of(vb, struct iss_buffer, vb); + struct iss_video *video = vfh->video; + unsigned long size = vfh->format.fmt.pix.sizeimage; + dma_addr_t addr; + + if (vb2_plane_size(vb, 0) < size) + return -ENOBUFS; + + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + if (!IS_ALIGNED(addr, 32)) { + dev_dbg(video->iss->dev, "Buffer address must be " + "aligned to 32 bytes boundary.\n"); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + buffer->iss_addr = addr; + return 0; +} + +static void iss_video_buf_queue(struct vb2_buffer *vb) +{ + struct iss_video_fh *vfh = vb2_get_drv_priv(vb->vb2_queue); + struct iss_video *video = vfh->video; + struct iss_buffer *buffer = container_of(vb, struct iss_buffer, vb); + struct iss_pipeline *pipe = to_iss_pipeline(&video->video.entity); + unsigned int empty; + unsigned long flags; + + spin_lock_irqsave(&video->qlock, flags); + empty = list_empty(&video->dmaqueue); + list_add_tail(&buffer->list, &video->dmaqueue); + spin_unlock_irqrestore(&video->qlock, flags); + + if (empty) { + enum iss_pipeline_state state; + unsigned int start; + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISS_PIPELINE_QUEUE_OUTPUT; + else + state = ISS_PIPELINE_QUEUE_INPUT; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state |= state; + video->ops->queue(video, buffer); + video->dmaqueue_flags |= ISS_VIDEO_DMAQUEUE_QUEUED; + + start = iss_pipeline_ready(pipe); + if (start) + pipe->state |= ISS_PIPELINE_STREAM; + spin_unlock_irqrestore(&pipe->lock, flags); + + if (start) + omap4iss_pipeline_set_stream(pipe, + ISS_PIPELINE_STREAM_SINGLESHOT); + } +} + +static struct vb2_ops iss_video_vb2ops = { + .queue_setup = iss_video_queue_setup, + .buf_prepare = iss_video_buf_prepare, + .buf_queue = iss_video_buf_queue, + .buf_cleanup = iss_video_buf_cleanup, +}; + +/* + * omap4iss_video_buffer_next - Complete the current buffer and return the next + * @video: ISS video object + * @error: Whether an error occurred during capture + * + * Remove the current video buffer from the DMA queue and fill its timestamp, + * field count and state fields before waking up its completion handler. + * + * The buffer state is set to VIDEOBUF_DONE if no error occurred (@error is 0) + * or VIDEOBUF_ERROR otherwise (@error is non-zero). + * + * The DMA queue is expected to contain at least one buffer. + * + * Return a pointer to the next buffer in the DMA queue, or NULL if the queue is + * empty. + */ +struct iss_buffer *omap4iss_video_buffer_next(struct iss_video *video, + unsigned int error) +{ + struct iss_pipeline *pipe = to_iss_pipeline(&video->video.entity); + enum iss_pipeline_state state; + struct iss_buffer *buf; + unsigned long flags; + struct timespec ts; + + spin_lock_irqsave(&video->qlock, flags); + if (WARN_ON(list_empty(&video->dmaqueue))) { + spin_unlock_irqrestore(&video->qlock, flags); + return NULL; + } + + buf = list_first_entry(&video->dmaqueue, struct iss_buffer, + list); + list_del(&buf->list); + spin_unlock_irqrestore(&video->qlock, flags); + + ktime_get_ts(&ts); + buf->vb.v4l2_buf.timestamp.tv_sec = ts.tv_sec; + buf->vb.v4l2_buf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC; + + /* Do frame number propagation only if this is the output video node. + * Frame number either comes from the CSI receivers or it gets + * incremented here if H3A is not active. + * Note: There is no guarantee that the output buffer will finish + * first, so the input number might lag behind by 1 in some cases. + */ + if (video == pipe->output && !pipe->do_propagation) + buf->vb.v4l2_buf.sequence = atomic_inc_return(&pipe->frame_number); + else + buf->vb.v4l2_buf.sequence = atomic_read(&pipe->frame_number); + + vb2_buffer_done(&buf->vb, error < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); + + spin_lock_irqsave(&video->qlock, flags); + if (list_empty(&video->dmaqueue)) { + spin_unlock_irqrestore(&video->qlock, flags); + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISS_PIPELINE_QUEUE_OUTPUT + | ISS_PIPELINE_STREAM; + else + state = ISS_PIPELINE_QUEUE_INPUT + | ISS_PIPELINE_STREAM; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~state; + if (video->pipe.stream_state == ISS_PIPELINE_STREAM_CONTINUOUS) + video->dmaqueue_flags |= ISS_VIDEO_DMAQUEUE_UNDERRUN; + spin_unlock_irqrestore(&pipe->lock, flags); + return NULL; + } + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && pipe->input != NULL) { + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~ISS_PIPELINE_STREAM; + spin_unlock_irqrestore(&pipe->lock, flags); + } + + buf = list_first_entry(&video->dmaqueue, struct iss_buffer, + list); + spin_unlock_irqrestore(&video->qlock, flags); + buf->vb.state = VB2_BUF_STATE_ACTIVE; + return buf; +} + +/* ----------------------------------------------------------------------------- + * V4L2 ioctls + */ + +static int +iss_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap) +{ + struct iss_video *video = video_drvdata(file); + + strlcpy(cap->driver, ISS_VIDEO_DRIVER_NAME, sizeof(cap->driver)); + strlcpy(cap->card, video->video.name, sizeof(cap->card)); + strlcpy(cap->bus_info, "media", sizeof(cap->bus_info)); + cap->version = ISS_VIDEO_DRIVER_VERSION; + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + else + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + + return 0; +} + +static int +iss_video_get_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + + if (format->type != video->type) + return -EINVAL; + + mutex_lock(&video->mutex); + *format = vfh->format; + mutex_unlock(&video->mutex); + + return 0; +} + +static int +iss_video_set_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + struct v4l2_mbus_framefmt fmt; + + if (format->type != video->type) + return -EINVAL; + + mutex_lock(&video->mutex); + + /* Fill the bytesperline and sizeimage fields by converting to media bus + * format and back to pixel format. + */ + iss_video_pix_to_mbus(&format->fmt.pix, &fmt); + iss_video_mbus_to_pix(video, &fmt, &format->fmt.pix); + + vfh->format = *format; + + mutex_unlock(&video->mutex); + return 0; +} + +static int +iss_video_try_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct iss_video *video = video_drvdata(file); + struct v4l2_subdev_format fmt; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + if (format->type != video->type) + return -EINVAL; + + subdev = iss_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + iss_video_pix_to_mbus(&format->fmt.pix, &fmt.format); + + fmt.pad = pad; + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); + if (ret) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + iss_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix); + return 0; +} + +static int +iss_video_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) +{ + struct iss_video *video = video_drvdata(file); + struct v4l2_subdev *subdev; + int ret; + + subdev = iss_video_remote_subdev(video, NULL); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, video, cropcap, cropcap); + mutex_unlock(&video->mutex); + + return ret == -ENOIOCTLCMD ? -EINVAL : ret; +} + +static int +iss_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct iss_video *video = video_drvdata(file); + struct v4l2_subdev_format format; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + subdev = iss_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + /* Try the get crop operation first and fallback to get format if not + * implemented. + */ + ret = v4l2_subdev_call(subdev, video, g_crop, crop); + if (ret != -ENOIOCTLCMD) + return ret; + + format.pad = pad; + format.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &format); + if (ret < 0) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + crop->c.left = 0; + crop->c.top = 0; + crop->c.width = format.format.width; + crop->c.height = format.format.height; + + return 0; +} + +static int +iss_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct iss_video *video = video_drvdata(file); + struct v4l2_subdev *subdev; + int ret; + + subdev = iss_video_remote_subdev(video, NULL); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, video, s_crop, crop); + mutex_unlock(&video->mutex); + + return ret == -ENOIOCTLCMD ? -EINVAL : ret; +} + +static int +iss_video_get_param(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + + if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || + video->type != a->type) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + a->parm.output.capability = V4L2_CAP_TIMEPERFRAME; + a->parm.output.timeperframe = vfh->timeperframe; + + return 0; +} + +static int +iss_video_set_param(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + + if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || + video->type != a->type) + return -EINVAL; + + if (a->parm.output.timeperframe.denominator == 0) + a->parm.output.timeperframe.denominator = 1; + + vfh->timeperframe = a->parm.output.timeperframe; + + return 0; +} + +static int +iss_video_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + + return vb2_reqbufs(&vfh->queue, rb); +} + +static int +iss_video_querybuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + + return vb2_querybuf(&vfh->queue, b); +} + +static int +iss_video_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + + return vb2_qbuf(&vfh->queue, b); +} + +static int +iss_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + + return vb2_dqbuf(&vfh->queue, b, file->f_flags & O_NONBLOCK); +} + +/* + * Stream management + * + * Every ISS pipeline has a single input and a single output. The input can be + * either a sensor or a video node. The output is always a video node. + * + * As every pipeline has an output video node, the ISS video objects at the + * pipeline output stores the pipeline state. It tracks the streaming state of + * both the input and output, as well as the availability of buffers. + * + * In sensor-to-memory mode, frames are always available at the pipeline input. + * Starting the sensor usually requires I2C transfers and must be done in + * interruptible context. The pipeline is started and stopped synchronously + * to the stream on/off commands. All modules in the pipeline will get their + * subdev set stream handler called. The module at the end of the pipeline must + * delay starting the hardware until buffers are available at its output. + * + * In memory-to-memory mode, starting/stopping the stream requires + * synchronization between the input and output. ISS modules can't be stopped + * in the middle of a frame, and at least some of the modules seem to become + * busy as soon as they're started, even if they don't receive a frame start + * event. For that reason frames need to be processed in single-shot mode. The + * driver needs to wait until a frame is completely processed and written to + * memory before restarting the pipeline for the next frame. Pipelined + * processing might be possible but requires more testing. + * + * Stream start must be delayed until buffers are available at both the input + * and output. The pipeline must be started in the videobuf queue callback with + * the buffers queue spinlock held. The modules subdev set stream operation must + * not sleep. + */ +static int +iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + enum iss_pipeline_state state; + struct iss_pipeline *pipe; + struct iss_video *far_end; + unsigned long flags; + int ret; + + if (type != video->type) + return -EINVAL; + + mutex_lock(&video->stream_lock); + + if (video->streaming) { + mutex_unlock(&video->stream_lock); + return -EBUSY; + } + + /* Start streaming on the pipeline. No link touching an entity in the + * pipeline can be activated or deactivated once streaming is started. + */ + pipe = video->video.entity.pipe + ? to_iss_pipeline(&video->video.entity) : &video->pipe; + media_entity_pipeline_start(&video->video.entity, &pipe->pipe); + + /* Verify that the currently configured format matches the output of + * the connected subdev. + */ + ret = iss_video_check_format(video, vfh); + if (ret < 0) + goto error; + + video->bpl_padding = ret; + video->bpl_value = vfh->format.fmt.pix.bytesperline; + + /* Find the ISS video node connected at the far end of the pipeline and + * update the pipeline. + */ + far_end = iss_video_far_end(video); + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + state = ISS_PIPELINE_STREAM_OUTPUT | ISS_PIPELINE_IDLE_OUTPUT; + pipe->input = far_end; + pipe->output = video; + } else { + if (far_end == NULL) { + ret = -EPIPE; + goto error; + } + + state = ISS_PIPELINE_STREAM_INPUT | ISS_PIPELINE_IDLE_INPUT; + pipe->input = video; + pipe->output = far_end; + } + + if (video->iss->pdata->set_constraints) + video->iss->pdata->set_constraints(video->iss, true); + + /* Validate the pipeline and update its state. */ + ret = iss_video_validate_pipeline(pipe); + if (ret < 0) + goto error; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~ISS_PIPELINE_STREAM; + pipe->state |= state; + spin_unlock_irqrestore(&pipe->lock, flags); + + /* Set the maximum time per frame as the value requested by userspace. + * This is a soft limit that can be overridden if the hardware doesn't + * support the request limit. + */ + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + pipe->max_timeperframe = vfh->timeperframe; + + video->queue = &vfh->queue; + INIT_LIST_HEAD(&video->dmaqueue); + spin_lock_init(&video->qlock); + atomic_set(&pipe->frame_number, -1); + + ret = vb2_streamon(&vfh->queue, type); + if (ret < 0) + goto error; + + /* In sensor-to-memory mode, the stream can be started synchronously + * to the stream on command. In memory-to-memory mode, it will be + * started when buffers are queued on both the input and output. + */ + if (pipe->input == NULL) { + unsigned long flags; + ret = omap4iss_pipeline_set_stream(pipe, + ISS_PIPELINE_STREAM_CONTINUOUS); + if (ret < 0) + goto error; + spin_lock_irqsave(&video->qlock, flags); + if (list_empty(&video->dmaqueue)) + video->dmaqueue_flags |= ISS_VIDEO_DMAQUEUE_UNDERRUN; + spin_unlock_irqrestore(&video->qlock, flags); + } + +error: + if (ret < 0) { + vb2_streamoff(&vfh->queue, type); + if (video->iss->pdata->set_constraints) + video->iss->pdata->set_constraints(video->iss, false); + media_entity_pipeline_stop(&video->video.entity); + video->queue = NULL; + } + + if (!ret) + video->streaming = 1; + + mutex_unlock(&video->stream_lock); + return ret; +} + +static int +iss_video_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct iss_video_fh *vfh = to_iss_video_fh(fh); + struct iss_video *video = video_drvdata(file); + struct iss_pipeline *pipe = to_iss_pipeline(&video->video.entity); + enum iss_pipeline_state state; + unsigned long flags; + + if (type != video->type) + return -EINVAL; + + mutex_lock(&video->stream_lock); + + if (!vb2_is_streaming(&vfh->queue)) + goto done; + + /* Update the pipeline state. */ + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISS_PIPELINE_STREAM_OUTPUT + | ISS_PIPELINE_QUEUE_OUTPUT; + else + state = ISS_PIPELINE_STREAM_INPUT + | ISS_PIPELINE_QUEUE_INPUT; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~state; + spin_unlock_irqrestore(&pipe->lock, flags); + + /* Stop the stream. */ + omap4iss_pipeline_set_stream(pipe, ISS_PIPELINE_STREAM_STOPPED); + vb2_streamoff(&vfh->queue, type); + video->queue = NULL; + video->streaming = 0; + + if (video->iss->pdata->set_constraints) + video->iss->pdata->set_constraints(video->iss, false); + media_entity_pipeline_stop(&video->video.entity); + +done: + mutex_unlock(&video->stream_lock); + return 0; +} + +static int +iss_video_enum_input(struct file *file, void *fh, struct v4l2_input *input) +{ + if (input->index > 0) + return -EINVAL; + + strlcpy(input->name, "camera", sizeof(input->name)); + input->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +static int +iss_video_g_input(struct file *file, void *fh, unsigned int *input) +{ + *input = 0; + + return 0; +} + +static int +iss_video_s_input(struct file *file, void *fh, unsigned int input) +{ + return input == 0 ? 0 : -EINVAL; +} + +static const struct v4l2_ioctl_ops iss_video_ioctl_ops = { + .vidioc_querycap = iss_video_querycap, + .vidioc_g_fmt_vid_cap = iss_video_get_format, + .vidioc_s_fmt_vid_cap = iss_video_set_format, + .vidioc_try_fmt_vid_cap = iss_video_try_format, + .vidioc_g_fmt_vid_out = iss_video_get_format, + .vidioc_s_fmt_vid_out = iss_video_set_format, + .vidioc_try_fmt_vid_out = iss_video_try_format, + .vidioc_cropcap = iss_video_cropcap, + .vidioc_g_crop = iss_video_get_crop, + .vidioc_s_crop = iss_video_set_crop, + .vidioc_g_parm = iss_video_get_param, + .vidioc_s_parm = iss_video_set_param, + .vidioc_reqbufs = iss_video_reqbufs, + .vidioc_querybuf = iss_video_querybuf, + .vidioc_qbuf = iss_video_qbuf, + .vidioc_dqbuf = iss_video_dqbuf, + .vidioc_streamon = iss_video_streamon, + .vidioc_streamoff = iss_video_streamoff, + .vidioc_enum_input = iss_video_enum_input, + .vidioc_g_input = iss_video_g_input, + .vidioc_s_input = iss_video_s_input, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 file operations + */ + +static int iss_video_open(struct file *file) +{ + struct iss_video *video = video_drvdata(file); + struct iss_video_fh *handle; + struct vb2_queue *q; + int ret = 0; + + handle = kzalloc(sizeof(*handle), GFP_KERNEL); + if (handle == NULL) + return -ENOMEM; + + v4l2_fh_init(&handle->vfh, &video->video); + v4l2_fh_add(&handle->vfh); + + /* If this is the first user, initialise the pipeline. */ + if (omap4iss_get(video->iss) == NULL) { + ret = -EBUSY; + goto done; + } + + ret = omap4iss_pipeline_pm_use(&video->video.entity, 1); + if (ret < 0) { + omap4iss_put(video->iss); + goto done; + } + + video->alloc_ctx = vb2_dma_contig_init_ctx(video->iss->dev); + if (IS_ERR(video->alloc_ctx)) { + ret = PTR_ERR(video->alloc_ctx); + omap4iss_put(video->iss); + goto done; + } + + q = &handle->queue; + + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP; + q->drv_priv = handle; + q->ops = &iss_video_vb2ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct iss_buffer); + + ret = vb2_queue_init(q); + if (ret) { + omap4iss_put(video->iss); + goto done; + } + + memset(&handle->format, 0, sizeof(handle->format)); + handle->format.type = video->type; + handle->timeperframe.denominator = 1; + + handle->video = video; + file->private_data = &handle->vfh; + +done: + if (ret < 0) { + v4l2_fh_del(&handle->vfh); + kfree(handle); + } + + return ret; +} + +static int iss_video_release(struct file *file) +{ + struct iss_video *video = video_drvdata(file); + struct v4l2_fh *vfh = file->private_data; + struct iss_video_fh *handle = to_iss_video_fh(vfh); + + /* Disable streaming and free the buffers queue resources. */ + iss_video_streamoff(file, vfh, video->type); + + omap4iss_pipeline_pm_use(&video->video.entity, 0); + + /* Release the file handle. */ + v4l2_fh_del(vfh); + kfree(handle); + file->private_data = NULL; + + omap4iss_put(video->iss); + + return 0; +} + +static unsigned int iss_video_poll(struct file *file, poll_table *wait) +{ + struct iss_video_fh *vfh = to_iss_video_fh(file->private_data); + + return vb2_poll(&vfh->queue, file, wait); +} + +static int iss_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct iss_video_fh *vfh = to_iss_video_fh(file->private_data); + + return vb2_mmap(&vfh->queue, vma);; +} + +static struct v4l2_file_operations iss_video_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = iss_video_open, + .release = iss_video_release, + .poll = iss_video_poll, + .mmap = iss_video_mmap, +}; + +/* ----------------------------------------------------------------------------- + * ISS video core + */ + +static const struct iss_video_operations iss_video_dummy_ops = { +}; + +int omap4iss_video_init(struct iss_video *video, const char *name) +{ + const char *direction; + int ret; + + switch (video->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + direction = "output"; + video->pad.flags = MEDIA_PAD_FL_SINK; + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + direction = "input"; + video->pad.flags = MEDIA_PAD_FL_SOURCE; + break; + + default: + return -EINVAL; + } + + ret = media_entity_init(&video->video.entity, 1, &video->pad, 0); + if (ret < 0) + return ret; + + mutex_init(&video->mutex); + atomic_set(&video->active, 0); + + spin_lock_init(&video->pipe.lock); + mutex_init(&video->stream_lock); + + /* Initialize the video device. */ + if (video->ops == NULL) + video->ops = &iss_video_dummy_ops; + + video->video.fops = &iss_video_fops; + snprintf(video->video.name, sizeof(video->video.name), + "OMAP4 ISS %s %s", name, direction); + video->video.vfl_type = VFL_TYPE_GRABBER; + video->video.release = video_device_release_empty; + video->video.ioctl_ops = &iss_video_ioctl_ops; + video->pipe.stream_state = ISS_PIPELINE_STREAM_STOPPED; + + video_set_drvdata(&video->video, video); + + return 0; +} + +int omap4iss_video_register(struct iss_video *video, struct v4l2_device *vdev) +{ + int ret; + + video->video.v4l2_dev = vdev; + + ret = video_register_device(&video->video, VFL_TYPE_GRABBER, -1); + if (ret < 0) + printk(KERN_ERR "%s: could not register video device (%d)\n", + __func__, ret); + + return ret; +} + +void omap4iss_video_unregister(struct iss_video *video) +{ + if (video_is_registered(&video->video)) { + media_entity_cleanup(&video->video.entity); + video_unregister_device(&video->video); + } +} diff --git a/drivers/media/video/omap4iss/iss_video.h b/drivers/media/video/omap4iss/iss_video.h new file mode 100644 index 0000000..fc123b0 --- /dev/null +++ b/drivers/media/video/omap4iss/iss_video.h @@ -0,0 +1,205 @@ +/* + * iss_video.h + * + * TI OMAP4 ISS - Generic video node + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Contacts: Sergio Aguirre <saaguirre@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP4_ISS_VIDEO_H +#define OMAP4_ISS_VIDEO_H + +#include <linux/v4l2-mediabus.h> +#include <linux/version.h> +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> + +#define ISS_VIDEO_DRIVER_NAME "issvideo" +#define ISS_VIDEO_DRIVER_VERSION KERNEL_VERSION(0, 0, 1) + +struct iss_device; +struct iss_video; +struct v4l2_mbus_framefmt; +struct v4l2_pix_format; + +/* + * struct iss_format_info - ISS media bus format information + * @code: V4L2 media bus format code + * @truncated: V4L2 media bus format code for the same format truncated to 10 + * bits. Identical to @code if the format is 10 bits wide or less. + * @uncompressed: V4L2 media bus format code for the corresponding uncompressed + * format. Identical to @code if the format is not DPCM compressed. + * @flavor: V4L2 media bus format code for the same pixel layout but + * shifted to be 8 bits per pixel. =0 if format is not shiftable. + * @pixelformat: V4L2 pixel format FCC identifier + * @bpp: Bits per pixel + */ +struct iss_format_info { + enum v4l2_mbus_pixelcode code; + enum v4l2_mbus_pixelcode truncated; + enum v4l2_mbus_pixelcode uncompressed; + enum v4l2_mbus_pixelcode flavor; + u32 pixelformat; + unsigned int bpp; +}; + +enum iss_pipeline_stream_state { + ISS_PIPELINE_STREAM_STOPPED = 0, + ISS_PIPELINE_STREAM_CONTINUOUS = 1, + ISS_PIPELINE_STREAM_SINGLESHOT = 2, +}; + +enum iss_pipeline_state { + /* The stream has been started on the input video node. */ + ISS_PIPELINE_STREAM_INPUT = 1, + /* The stream has been started on the output video node. */ + ISS_PIPELINE_STREAM_OUTPUT = 2, + /* At least one buffer is queued on the input video node. */ + ISS_PIPELINE_QUEUE_INPUT = 4, + /* At least one buffer is queued on the output video node. */ + ISS_PIPELINE_QUEUE_OUTPUT = 8, + /* The input entity is idle, ready to be started. */ + ISS_PIPELINE_IDLE_INPUT = 16, + /* The output entity is idle, ready to be started. */ + ISS_PIPELINE_IDLE_OUTPUT = 32, + /* The pipeline is currently streaming. */ + ISS_PIPELINE_STREAM = 64, +}; + +struct iss_pipeline { + struct media_pipeline pipe; + spinlock_t lock; /* Pipeline state and queue flags */ + unsigned int state; + enum iss_pipeline_stream_state stream_state; + struct iss_video *input; + struct iss_video *output; + atomic_t frame_number; + bool do_propagation; /* of frame number */ + struct v4l2_fract max_timeperframe; +}; + +#define to_iss_pipeline(__e) \ + container_of((__e)->pipe, struct iss_pipeline, pipe) + +static inline int iss_pipeline_ready(struct iss_pipeline *pipe) +{ + return pipe->state == (ISS_PIPELINE_STREAM_INPUT | + ISS_PIPELINE_STREAM_OUTPUT | + ISS_PIPELINE_QUEUE_INPUT | + ISS_PIPELINE_QUEUE_OUTPUT | + ISS_PIPELINE_IDLE_INPUT | + ISS_PIPELINE_IDLE_OUTPUT); +} + +/* + * struct iss_buffer - ISS buffer + * @buffer: ISS video buffer + * @iss_addr: Physical address of the buffer. + */ +struct iss_buffer { + /* common v4l buffer stuff -- must be first */ + struct vb2_buffer vb; + struct list_head list; + dma_addr_t iss_addr; +}; + +#define to_iss_buffer(buf) container_of(buf, struct iss_buffer, buffer) + +enum iss_video_dmaqueue_flags { + /* Set if DMA queue becomes empty when ISS_PIPELINE_STREAM_CONTINUOUS */ + ISS_VIDEO_DMAQUEUE_UNDERRUN = (1 << 0), + /* Set when queuing buffer to an empty DMA queue */ + ISS_VIDEO_DMAQUEUE_QUEUED = (1 << 1), +}; + +#define iss_video_dmaqueue_flags_clr(video) \ + ({ (video)->dmaqueue_flags = 0; }) + +/* + * struct iss_video_operations - ISS video operations + * @queue: Resume streaming when a buffer is queued. Called on VIDIOC_QBUF + * if there was no buffer previously queued. + */ +struct iss_video_operations { + int(*queue)(struct iss_video *video, struct iss_buffer *buffer); +}; + +struct iss_video { + struct video_device video; + enum v4l2_buf_type type; + struct media_pad pad; + + struct mutex mutex; /* format and crop settings */ + atomic_t active; + + struct iss_device *iss; + + unsigned int capture_mem; + unsigned int bpl_alignment; /* alignment value */ + unsigned int bpl_zero_padding; /* whether the alignment is optional */ + unsigned int bpl_max; /* maximum bytes per line value */ + unsigned int bpl_value; /* bytes per line value */ + unsigned int bpl_padding; /* padding at end of line */ + + /* Entity video node streaming */ + unsigned int streaming:1; + + /* Pipeline state */ + struct iss_pipeline pipe; + struct mutex stream_lock; /* pipeline and stream states */ + + /* Video buffers queue */ + struct vb2_queue *queue; + spinlock_t qlock; /* Spinlock for dmaqueue */ + struct list_head dmaqueue; + enum iss_video_dmaqueue_flags dmaqueue_flags; + struct vb2_alloc_ctx *alloc_ctx; + + const struct iss_video_operations *ops; +}; + +#define to_iss_video(vdev) container_of(vdev, struct iss_video, video) + +struct iss_video_fh { + struct v4l2_fh vfh; + struct iss_video *video; + struct vb2_queue queue; + struct v4l2_format format; + struct v4l2_fract timeperframe; +}; + +#define to_iss_video_fh(fh) container_of(fh, struct iss_video_fh, vfh) +#define iss_video_queue_to_iss_video_fh(q) \ + container_of(q, struct iss_video_fh, queue) + +int omap4iss_video_init(struct iss_video *video, const char *name); +int omap4iss_video_register(struct iss_video *video, + struct v4l2_device *vdev); +void omap4iss_video_unregister(struct iss_video *video); +struct iss_buffer *omap4iss_video_buffer_next(struct iss_video *video, + unsigned int error); +struct media_pad *omap4iss_video_remote_pad(struct iss_video *video); + +const struct iss_format_info * +omap4iss_video_format_info(enum v4l2_mbus_pixelcode code); + +#endif /* OMAP4_ISS_VIDEO_H */ -- 1.7.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
