Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/rc/keymaps/rc-hauppauge.c | 51 +++++++++++++++++++++++++++++
drivers/media/video/em28xx/em28xx-cards.c | 1 +
2 files changed, 52 insertions(+), 0 deletions(-)
diff --git a/drivers/media/rc/keymaps/rc-hauppauge.c b/drivers/media/rc/keymaps/rc-hauppauge.c
index cd3db77..0afb23b 100644
--- a/drivers/media/rc/keymaps/rc-hauppauge.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge.c
@@ -182,6 +182,57 @@ static struct rc_map_table rc5_hauppauge_new[] = {
{ 0x1d3f, KEY_HOME },
/*
+ * Keycodes for PT# R-005 remote bundled with Haupauge HVR-930C
+ * Keycodes start with address = 0x1c
+ */
+ { 0x1c3b, KEY_GOTO },
+ { 0x1c3d, KEY_POWER },
+
+ { 0x1c14, KEY_UP },
+ { 0x1c15, KEY_DOWN },
+ { 0x1c16, KEY_LEFT },
+ { 0x1c17, KEY_RIGHT },
+ { 0x1c25, KEY_OK },
+
+ { 0x1c00, KEY_0 },
+ { 0x1c01, KEY_1 },
+ { 0x1c02, KEY_2 },
+ { 0x1c03, KEY_3 },
+ { 0x1c04, KEY_4 },
+ { 0x1c05, KEY_5 },
+ { 0x1c06, KEY_6 },
+ { 0x1c07, KEY_7 },
+ { 0x1c08, KEY_8 },
+ { 0x1c09, KEY_9 },
+
+ { 0x1c1f, KEY_EXIT }, /* BACK */
+ { 0x1c0d, KEY_MENU },
+ { 0x1c1c, KEY_TV },
+
+ { 0x1c10, KEY_VOLUMEUP },
+ { 0x1c11, KEY_VOLUMEDOWN },
+
+ { 0x1c20, KEY_CHANNELUP },
+ { 0x1c21, KEY_CHANNELDOWN },
+
+ { 0x1c0f, KEY_MUTE },
+ { 0x1c12, KEY_PREVIOUS }, /* Prev */
+
+ { 0x1c36, KEY_STOP },
+ { 0x1c37, KEY_RECORD },
+
+ { 0x1c24, KEY_LAST }, /* <| */
+ { 0x1c1e, KEY_NEXT }, /* >| */
+
+ { 0x1c0a, KEY_TEXT },
+ { 0x1c0e, KEY_SUBTITLE }, /* CC */
+
+ { 0x1c32, KEY_REWIND },
+ { 0x1c30, KEY_PAUSE },
+ { 0x1c35, KEY_PLAY },
+ { 0x1c34, KEY_FASTFORWARD },
+
+ /*
* Keycodes for the old Black Remote Controller
* This one also uses RC-5 protocol
* Keycodes start with address = 0x00
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index d92e0af..f63a715 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -922,6 +922,7 @@ struct em28xx_board em28xx_boards[] = {
#else
.tuner_type = TUNER_ABSENT,
#endif
+ .ir_codes = RC_MAP_HAUPPAUGE,
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
--
1.7.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
