On 11/12/2011 07:26 AM, Rory McCann wrote: > Hi, > > I recently bought a Hauppauge WinTV-HVR-900H (usb id: 2040:b138), but I > see from this wiki page > http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-900H that there is > no driver for it. However that's as of 2008. > > Has there been any progress on this since? Is that wiki page correct > that there is still no support for that card? Is there anyway to get > this USB device to work under linux? > > Thanks, > Hi Rory, If you search for the 900H, you'll find a thread titled "Hauppauge HVR900H don't work with kernel 3.*". The original submitter stated that it worked in 2.6.x, but when the computer was upgraded to a 3.x kernel, it stopped working. This was two days ago (9 November 2011), so I'm not sure how much progress was made (if any). So, if your running a 2.6.x kernel, it *may* work, but it seems to be broken on the 3.x kernels (Ubuntu 11.10 or similar distros). Unfortunately I don't have that tuner, so I can't help out with it. I would say try it. You can check dmesg to see if the tuner is even being recognized (and drivers loaded). If so, then see if it works. If not, then you might need the latest build of the v4l. You can get information on installing the latest version from http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers . Then make it (without your tuner plugged in) and try plugging it in again. Check dmesg again, and if it's recognized, try it. Sorry I couldn't find more information on this. Also if anyone else posts a reply, I would defer to their suggestions--as they have more experience with this than me. Have a good weekend.:) Patrick. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
