On 2011-11-08 17:54, Laurent Pinchart wrote:
Hi Gary,
On Tuesday 08 November 2011 14:38:55 Gary Thomas wrote:
On 2011-11-08 06:06, Laurent Pinchart wrote:
On Tuesday 08 November 2011 13:52:25 Gary Thomas wrote:
On 2011-11-08 05:30, Javier Martinez Canillas wrote:
On Tue, Nov 8, 2011 at 1:20 PM, Gary Thomas wrote:
On 2011-11-04 04:37, Laurent Pinchart wrote:
On Tuesday 01 November 2011 19:52:49 Gary Thomas wrote:
I'm trying to use the MT9P031 digital sensor with the Media
Controller Framework. media-ctl tells me that the sensor is set to
capture using SGRBG12 2592x1944
Questions:
* What pixel format in ffmpeg does this correspond to?
I don't know if ffmpeg supports Bayer formats. The corresponding
fourcc in V4L2 is BA12.
ffmpeg doesn't seem to support these formats
If your sensor is hooked up to the OMAP3 ISP, you can then configure
the pipeline to include the preview engine and the resizer, and
capture YUV data
at the resizer output.
I am using the OMAP3 ISP, but it's a bit unclear to me how to set up
the pipeline
Hi Gary,
I'm also using another sensor mtv9034 with OMAP3 ISP, so maybe I can
help you.
using media-ctl (I looked for documentation on this tool, but came up
dry - is there any?)
Do you have an example of how to configure this using the OMAP3 ISP?
This is how I configure the pipeline to connect the CCDC with the
Previewer and Resizer:
./media-ctl -l '"mt9v032 3-005c":0->"OMAP3 ISP CCDC":0[1]'
./media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]'
./media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]'
./media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer output":0[1]'
./media-ctl -f '"mt9v032 3-005c":0[SGRBG10 752x480]'
./media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG10 752x480]'
./media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 752x480]'
./media-ctl -f '"OMAP3 ISP preview":0 [SGRBG10 752x479]'
./media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 734x471]'
./media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 640x480]'
Hope it helps,
Thanks, I'll give this a try.
I assume that your sensor is probably larger than 752x480 (the mt9p031
is 2592x1944 raw) and that setting the smaller frame size enables some
scaling and/or cropping in the driver?
The mt9v034 is a wide VGA 752x480 sensor if I'm not mistaken. You should
modify the resolutions in the above commands according to your sensor.
Note that the CCDC crops online line when outputting data to the preview
engine, and that the preview engine crops 18 columsn and 8 lines. You
can then scale the image by modifying the resizer output size.
Thanks. After much trial and error (and some kernel printks to
understand what parameters were failing), I came up with this sequence:
media-ctl -r
media-ctl -l '"mt9p031 3-005d":0->"OMAP3 ISP CCDC":0[1]'
media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]'
media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]'
media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer output":0[1]'
media-ctl -f '"mt9p031 3-005d":0[SGRBG12 2592x1944]'
media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG12 2592x1944]'
media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG12 2592x1944]'
media-ctl -f '"OMAP3 ISP preview":0 [SGRBG12 2592x1943]'
media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 2574x1935]'
media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 642x483]'
When I tried to grab though, I got this:
# yavta --capture=4 -f YUYV -s 642x483 -F /dev/video6
Device /dev/video6 opened.
Device `OMAP3 ISP resizer output' on `media' is a video capture device.
Video format set: YUYV (56595559) 642x483 buffer size 633696
Video format: YUYV (56595559) 642x483 buffer size 633696
8 buffers requested.
length: 633696 offset: 0
Buffer 0 mapped at address 0x4028c000.
length: 633696 offset: 634880
Buffer 1 mapped at address 0x403d0000.
length: 633696 offset: 1269760
Buffer 2 mapped at address 0x404b3000.
length: 633696 offset: 1904640
Buffer 3 mapped at address 0x4062b000.
length: 633696 offset: 2539520
Buffer 4 mapped at address 0x406d6000.
length: 633696 offset: 3174400
Buffer 5 mapped at address 0x40821000.
length: 633696 offset: 3809280
Buffer 6 mapped at address 0x4097c000.
length: 633696 offset: 4444160
Buffer 7 mapped at address 0x40adf000.
Unable to handle kernel NULL pointer dereference at virtual address
00000018
Ouch :-(
Could you please verify that arch/arm/mach-omap2/board-overo.c includes the
following code, and that CONFIG_OMAP_MUX is enabled ?
I'm not using an Overo board - rather one of our own internal designs.
I have verified that the pull up/down on those pins is disabled.
The failure is coming from this code in ispccdc.c
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
struct isp_pipeline *pipe =
to_isp_pipeline(&ccdc->video_out.video.entity);
The value of pipe is NULL which leads to the failure.
Questions:
* I assume that getting HS/VS interrupts is correct in this mode?
* Why is the statement not written (as all others are)
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
I tried this change and the kernel doesn't crash.
I've found that I can get raw frames out of CCDC, but I don't get anything at
all when the output continues through the preview and/or resize nodes.
Ideas?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
