Hi, I would like to know what is the correct way to switch the current video input during capture on a card with a single BT878 chip and 4 inputs (http://store.bluecherry.net/products/PV%252d143-%252d-4-port-video-capture-card-%2830FPS%29-%252d-OEM.html). I tried doing it in two ways: - using VIDIOC_S_INPUT to change the current input. While this works, the next captured frame shows video from the old input in its top half and video from the new input in the bottom half. - I tried setting the input field to the new input and flags to V4L2_BUF_FLAG_INPUT in the struct v4l2_buffer passed to VIDIOC_QBUF when enqueuing buffers. However, when doing so, the ioctl fails altogether, and I cannot enqueue any buffers with the V4L2_BUF_FLAG_INPUT flag set. Is there another way of doing it ? or is there a way to synchronise the input change (when using VIDIOC_S_INPUT) so it happens in between 2 frames and produces a clean switch ? Thanks Gilles -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
