I'm using different board.
According "media-ctl -p":
- entity 5: OMAP3 ISP CCDC (3 pads, 9 links)
type V4L2 subdev subtype Unknown
device node name /dev/v4l-subdev2
pad0: Input [UYVY2X8 720x525]
<- 'OMAP3 ISP CCP2':pad1 []
<- 'OMAP3 ISP CSI2a':pad1 []
<- 'tvp5150 3-005c':pad0 [ACTIVE]
pad1: Output [UYVY2X8 720x525]
-> 'OMAP3 ISP CCDC output':pad0 [ACTIVE]
-> 'OMAP3 ISP resizer':pad0 []
pad2: Output [UYVY2X8 720x524]
-> 'OMAP3 ISP preview':pad0 []
-> 'OMAP3 ISP AEWB':pad0 [IMMUTABLE,ACTIVE]
-> 'OMAP3 ISP AF':pad0 [IMMUTABLE,ACTIVE]
-> 'OMAP3 ISP histogram':pad0 [IMMUTABLE,ACTIVE]
- entity 6: OMAP3 ISP CCDC output (1 pad, 1 link)
type Node subtype V4L
device node name /dev/video4
pad0: Input
<- 'OMAP3 ISP CCDC':pad1 [ACTIVE]
Should be /dev/video4...
On Tue, Oct 18, 2011 at 5:07 PM, Gary Thomas <gary@xxxxxxxxxxxx> wrote:
> On 2011-10-18 07:33, Boris Todorov wrote:
>>
>> Hi
>>
>> I'm trying to run OMAP + TVP5151 in BT656 mode.
>>
>> I'm using omap3isp-omap3isp-yuv (git.linuxtv.org/pinchartl/media.git).
>> Plus the following patches:
>>
>> TVP5151:
>>
>> https://github.com/ebutera/meta-igep/tree/testing-v2/recipes-kernel/linux/linux-3.0+3.1rc/tvp5150
>>
>> The latest RFC patches for BT656 support:
>>
>> Enrico Butera (2):
>> omap3isp: ispvideo: export isp_video_mbus_to_pix
>> omap3isp: ispccdc: configure CCDC registers and add BT656 support
>>
>> Javier Martinez Canillas (1):
>> omap3isp: ccdc: Add interlaced field mode to platform data
>>
>>
>> I'm able to configure with media-ctl:
>>
>> media-ctl -v -r -l '"tvp5150 3-005c":0->"OMAP3 ISP CCDC":0[1], "OMAP3
>> ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]'
>> media-ctl -v --set-format '"tvp5150 3-005c":0 [UYVY2X8 720x525]'
>> media-ctl -v --set-format '"OMAP3 ISP CCDC":0 [UYVY2X8 720x525]'
>> media-ctl -v --set-format '"OMAP3 ISP CCDC":1 [UYVY2X8 720x525]'
>>
>> But
>> ./yavta -f UYVY -s 720x525 -n 4 --capture=4 -F /dev/video4
>>
>> sleeps after
>> ...
>> Buffer 1 mapped at address 0x4021d000.
>> length: 756000 offset: 1515520
>> Buffer 2 mapped at address 0x402d6000.
>> length: 756000 offset: 2273280
>> Buffer 3 mapped at address 0x4038f000.
>>
>> Anyone with the same issue??? This happens with every other v4l test app I
>> used.
>> I can see data from TVP5151 but there are no interrupts in ISP.
>
> Why are you using /dev/video4? The CCDC output is on /dev/video2
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
