Hi all, Sorry if this is the wrong place for this question, but I've had trouble finding recent information about fm card support in light of recent kernel changes. Context ========= I use an fm card (WINTV-GO fm) for listening/recording radio. It's a great tool for building fair-use recordings. Kernel upgrades--dropping V4L1 support-- forced upgrading fmtools (from 1.0.2 to 2.0.1). However, "fm" command fails: #fm on Radio on (radio does not support volume control) # fm 98.7 /usr/local/bin/fm: Frequency 98.7 MHz out of range (0.0 - 0.0 MHz) Tuner module =============== For documentation, I've used the bttv howto: http://tldp.org/HOWTO/html_single/BTTV/ "modprobe tuner" succeeds but then "tuner" doesn't appear in the lsmod output. I don't see any 'tuner' modules in the '/lib/modules/* (I've appended dmesg output below). Question ============ Does the tuner module still exist? What kernnel config options to load it? Google searches showed most of the documentation is 5-10 years old and "last.fm" seems more popular than "over the air fm". thanks will Appendix A. Dmesg Output =========================== Here are relevent sections from dmesg: bttv: driver version 0.9.18 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv 0000:05:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 bttv0: Bt878 (rev 2) at 0000:05:0a.0, irq: 21, latency: 66, mmio: 0xf8500000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 62471, rev A2 , serial# 1155176 tveeprom 0-0050: tuner model is Philips FM1236 (idx 23, type 2) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is TDA9850 (idx 3) tveeprom 0-0050: has radio bttv0: Hauppauge eeprom indicates model#62471 bttv: driver version 0.9.18 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv 0000:05:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 bttv0: Bt878 (rev 2) at 0000:05:0a.0, irq: 21, latency: 66, mmio: 0xf8500000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 62471, rev A2 , serial# 1155176 tveeprom 0-0050: tuner model is Philips FM1236 (idx 23, type 2) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is TDA9850 (idx 3) tveeprom 0-0050: has radio bttv0: Hauppauge eeprom indicates model#62471 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
