2011/10/6 Jason Hecker <jwhecker@xxxxxxxxx>: >> http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw > > 5.1? OK, I might eventually try that one too. > >> This morning I get a little pixeled playback, less than a second. > > OK, mine was fine for a few days then the pixellation started up in earnest. > > At the moment my symptoms were always: > > TunerA: Tuned - picture good > TunerB: Idle > > Tuner B gets tuned, Tuner A starts to pixellate badly. > > I am sure this is the case too: > > TunerA: Idle > TunerB: Tuned - picture good > > Tuner A gets tuned and has a bad recording. *Never* has Tuner B > suffered from the pixellation in spite of whatever Tuner A is doing! > > Anyway, Malcolm has suggested there is a bug lurking in MythTV too > causing problems with dual tuners so it's a bit hard to isolate the > issue. > Hello again, I am having more pixeled playback, I don't know how to explain so I record a video: http://dl.dropbox.com/u/1541853/VID_20111006_004447.3gp I get this I2C messages: # tail -f /var/log/messages Oct 5 20:16:44 htpc kernel: [ 534.168957] af9013: I2C read failed reg:d330 Oct 5 20:16:49 htpc kernel: [ 538.626152] af9013: I2C read failed reg:d330 Oct 5 21:22:15 htpc kernel: [ 4464.930734] af9013: I2C write failed reg:d2e2 len:1 Oct 5 21:40:46 htpc kernel: [ 5576.241897] af9013: I2C read failed reg:d2e6 Oct 5 23:07:33 htpc kernel: [10782.852522] af9013: I2C read failed reg:d2e6 Oct 5 23:20:11 htpc kernel: [11540.824515] af9013: I2C read failed reg:d07c Oct 6 00:11:41 htpc kernel: [14631.122384] af9013: I2C read failed reg:d2e6 Oct 6 00:26:13 htpc kernel: [15502.900549] af9013: I2C read failed reg:d2e6 Oct 6 00:39:58 htpc kernel: [16328.273015] af9013: I2C read failed reg:d330 My signal is this: (idle) $ femon -H -a 4 FE: Afatech AF9013 DVB-T (DVBT) status S | signal 75% | snr 0% | ber 0 | unc 0 | status S | signal 75% | snr 0% | ber 0 | unc 0 | status S | signal 75% | snr 0% | ber 0 | unc 0 | status S | signal 75% | snr 0% | ber 0 | unc 0 | status S | signal 74% | snr 0% | ber 0 | unc 0 | status S | signal 74% | snr 0% | ber 0 | unc 0 | (watching) $ femon -H -a 5 FE: Afatech AF9013 DVB-T (DVBT) status SCVYL | signal 74% | snr 0% | ber 142 | unc 319408 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 142 | unc 319408 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 31 | unc 319430 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 31 | unc 319430 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 56 | unc 319519 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 0 | unc 319519 | FE_HAS_LOCK status SCVYL | signal 74% | snr 0% | ber 0 | unc 319519 | FE_HAS_LOCK There are lots of ber and unc bits, I have connected the TV to the same wire and there is a good signal. Thanks for your help. Regards. -- Josu Lazkano -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
