Hi
The following change set is a third version of the subdev driver for S5K6AAFX sensor.
Changes since v2:
- addressed Sakari's comments:
use lower case used for all hexadecimal numbers,
use usleep_range instead of udelay,
move mirror flags to s5k6aa struct,
remove static data from s5k6aa_preset struct
- minimize I2C access in S_CTRL handler
- return constant TRY format in subdev open()
- added set_crop/get_crop ops
- fixed bugs in the internal PLL/clocks setup functions resulting
in the firmware rejecting whole user configuration in some cases
- added driver's private controls for RGB component gains
- corrections per Hans' suggestions:
removed unneeded v4l2_* subdev controls ops
- patch 2/2 - no changes
Changes since v1:
- improved s5k6aa_initialize_ctrls()
- fixed pixel resolution update issue which resulted in cropping
where scaling was expected
- used V4L2_COLORFX_SKY_BLUE instead of V4L2_COLORFX_ALPHA
- dropped patch adding V4L2_COLORFX_AQUA entry for V4L2_CID_COLORFX control
- patch 2/2 - no changes
Thanks again for all the review comments.
Sylwester Nawrocki (2):
v4l: Add AUTO option for the V4L2_CID_POWER_LINE_FREQUENCY control
v4l: Add v4l2 subdev driver for S5K6AAFX sensor
Documentation/DocBook/media/v4l/controls.xml | 5 +-
drivers/media/video/Kconfig | 7 +
drivers/media/video/Makefile | 1 +
drivers/media/video/s5k6aa.c | 1690 ++++++++++++++++++++++++++
drivers/media/video/v4l2-ctrls.c | 1 +
include/linux/videodev2.h | 1 +
include/media/s5k6aa.h | 51 +
7 files changed, 1754 insertions(+), 2 deletions(-)
create mode 100644 drivers/media/video/s5k6aa.c
create mode 100644 include/media/s5k6aa.h
Regards,
--
Sylwester Nawrocki
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
