Le Thu, 22 Sep 2011 11:09:22 -0400, Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx> a écrit : > Ok, that is a good start. I would definitely submit that as a patch > (including your Signed-off-by line). Sure, we will definitely do this. > Regarding the outstanding issue, I believe I did see that and fixed > it. Please look the history for the various cx231xx files surrounding > the time of the ".dont_use_port_3 = 1" fix. If I recall, that patch > was actually part of a series of two or three patches which were > required for that device to work properly. I believe the other patch > needed included an extra 10ms msleep call to ensure the hardware is > powered up fully before issuing certain i2c commands (which are what > are causing the -71 errors). I guess you're talking about 44ecf1df9493e6684cd1bb34abb107a0ffe1078a, which ensures a 10ms msleep call. We don't have this patch, but as with CONFIG_HZ=100, msleep() calls are anyway rounded up to 10ms, so I'm not sure this patch will have a huge impact. But we will try. Then, there is also de99d5328c6d54694471da28711a05adec708c3b, but it doesn't seem to be related to our problem. But we will also try with that one. > If you cannot find it, let me know and I will dig around my archives > and find it for you (I'm actually at work right now so it would be > inopportune for me to do it right this minute). :-) Thanks for your very quick feedback! Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
