Mauro, On Wed, Sep 21, 2011 at 10:14 PM, Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> wrote: > Em 04-05-2011 08:27, Lutz Sammer escreveu: >> On 05/04/11 01:16, Mauro Carvalho Chehab wrote: >>> Em 13-04-2011 21:05, Lutz Sammer escreveu: >>>>> On 05/04/11 21:07, Steffen Barszus wrote: >>>>>> On Tue, 05 Apr 2011 13:00:14 +0200 >>>>>> "Issa Gorissen" <flop.m@xxxxxxx> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Eutelsat made a recent migration from DVB-S to DVB-S2 (since >>>>>>> 31/3/2011) on two transponders on HB13E >>>>>>> >>>>>>> - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500 >>>>>>> Msymb/s 0.2 Pilot off Polar H >>>>>>> >>>>>>> - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500 >>>>>>> Msymb/s 0.2 Pilot off Polar H >>>>>>> >>>>>>> >>>>>>> Before those changes, with my TT S2 3200, I was able to watch TV on >>>>>>> those transponders. Now, I cannot even tune on those transponders. I >>>>>>> have tried with scan-s2 and w_scan and the latest drivers from git. >>>>>>> They both find the transponders but cannot tune onto it. >>>>>>> >>>>>>> Something noteworthy is that my other card, a DuoFlex S2 can tune >>>>>>> fine on those transponders. >>>>>>> >>>>>>> My question is; can someone try this as well with a TT S2 3200 and >>>>>>> post the results ? >>>>>> i read something about it lately here (german!): >>>>>> http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938 >>>>>> >>>>>> It says in stb0899_drv.c function: >>>>>> static void stb0899_set_iterations(struct stb0899_state *state) >>>>>> >>>>>> This: >>>>>> reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER); >>>>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); >>>>>> stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); >>>>>> >>>>>> should be replaced with this: >>>>>> >>>>>> reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER); >>>>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); >>>>>> stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); >>>>>> >>>>>> Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines >>>>>> affected. >>>>>> >>>>>> Kind Regards >>>>>> >>>>>> Steffen >>>>> Hi Steffen, >>>>> >>>>> Unfortunately, it does not help in my case. Thx anyway. >>>> >>>> Try my locking fix. With above patch I can lock the >>>> channels without problem. >>> >>> Can someone confirm that such patch would fix the issue? If so, please >>> forward it in a way that it could be applied (patch is currently line-wrapped), >>> and submit with some comments/description and your SOB. >>> >>> As the patch is currently broken, I'm just marking it as rejected at patchwork. >>> >>> Manu, >>> >>> Please take a look on this trouble report. >>> >> >> Sorry, the things are mixed here. My patch (resend and hopefully this >> time not broken) handles only DVB-S transponders. >> >> The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for >> me. But I have very weak receiption, >> >> Johns > > Manu, > > We're still missing your review on this patch[1], or it were eventually > missed. Please review it. > > Thanks, > Mauro > > [1] http://patchwork.linuxtv.org/patch/6511/ > Patch is good and correct. Thanks. Reviewed-by: Manu Abraham <manu@xxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
