[PATCH] m5mols: Remove superfluous irq field from the platform data struct

[Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>]

There is no need to put the IRQ number in driver's private platform
data structure as this can also be passed through struct i2c_lient.irq.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
 drivers/media/video/m5mols/m5mols_core.c |    6 +++---
 include/media/m5mols.h                   |    4 +---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index fb8e4a7..5d21d05 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -936,7 +936,7 @@ static int __devinit m5mols_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	if (!pdata->irq) {
+	if (!client->irq) {
 		dev_err(&client->dev, "Interrupt not assigned\n");
 		return -EINVAL;
 	}
@@ -973,7 +973,7 @@ static int __devinit m5mols_probe(struct i2c_client *client,
 
 	init_waitqueue_head(&info->irq_waitq);
 	INIT_WORK(&info->work_irq, m5mols_irq_work);
-	ret = request_irq(pdata->irq, m5mols_irq_handler,
+	ret = request_irq(client->irq, m5mols_irq_handler,
 			  IRQF_TRIGGER_RISING, MODULE_NAME, sd);
 	if (ret) {
 		dev_err(&client->dev, "Interrupt request failed: %d\n", ret);
@@ -998,7 +998,7 @@ static int __devexit m5mols_remove(struct i2c_client *client)
 	struct m5mols_info *info = to_m5mols(sd);
 
 	v4l2_device_unregister_subdev(sd);
-	free_irq(info->pdata->irq, sd);
+	free_irq(client->irq, sd);
 
 	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
 	gpio_free(info->pdata->gpio_reset);
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index aac2c0e..4a825ae 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -18,15 +18,13 @@
 
 /**
  * struct m5mols_platform_data - platform data for M-5MOLS driver
- * @irq:	GPIO getting the irq pin of M-5MOLS
  * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
- * @reset_polarity: active state for gpio_rst pin, 0 or 1
+ * @reset_polarity: active state for gpio_reset pin, 0 or 1
  * @set_power:	an additional callback to the board setup code
  *		to be called after enabling and before disabling
  *		the sensor's supply regulators
  */
 struct m5mols_platform_data {
-	int irq;
 	int gpio_reset;
 	u8 reset_polarity;
 	int (*set_power)(struct device *dev, int on);
-- 
1.7.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html