I'm running Mythbuntu 11.04 (2.6.38-11 kernel) and recently bought a
Leadtek Winfast DTV2000DS PCI dual tuner card. It's supposed to work
out-of-the-box but mine just doesn't... I've tried the card in a Windows
7 Media PC and it worked sweet as, so I know there's nothing wrong with
the hardware...
So the relevant section from lsusb is
$lsusb
/
Bus 006 Device 002: ID 0413:6a04 Leadtek Research, Inc./
and with more detail
$sudo lsusb -v -s 006:002
/Bus 006 Device 002: ID 0413:6a04 Leadtek Research, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0413 Leadtek Research, Inc.
idProduct 0x6a04
bcdDevice 2.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
/
The relevant section from dmesg is
$dmesg
/[ 84.230061] usb 6-1: new full speed USB device using uhci_hcd and
address 2
[ 99.085019] IR NEC protocol handler initialized
[ 99.100323] IR RC5(x) protocol handler initialized
[ 99.104296] IR RC6 protocol handler initialized
[ 99.107529] IR JVC protocol handler initialized
[ 99.110847] IR Sony protocol handler initialized
[ 99.119084] lirc_dev: IR Remote Control driver registered, major 250
[ 99.133810] IR LIRC bridge handler initialized
[ 104.704513] af9015: bulk message failed:-110 (8/0)
[ 104.704524] af9015: eeprom read failed:-110
[ 104.704547] dvb_usb_af9015: probe of 6-1:1.0 failed with error -110
[ 104.706480] usbcore: registered new interface driver dvb_usb_af9015
/
if i try and manually load the driver i get
$sudo modprobe dvb-usb-af9015
$ dmesg
/[ 6163.061092] usb 6-1: usbfs: USBDEVFS_CONTROL failed cmd lsusb rqt
128 rq 6 len 255 ret -110/
I've messed around a lot, different versions of the firmware etc, i
chucked in an empty HDD and tried a clean install of 11.04, and tried to
install 11.10 Beta 1 (that doesn't work - it freezes after the Remote
Control Setup page as someone reported here
https://bugs.launchpad.net/bugs/854426), and nothing has worked besides
using it in a Windows machine.
Any ideas?
cheers
Shep
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
