FIELD is an Even/Odd field selection signal, as specified in ITU-R BT.601 standard. Add corresponding flag for configuring the FIELD signal polarity. Also add a comment about usage of V4L2_MBUS_[HV]SYNC* flags for the hardware that uses [HV]REF signals. Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- include/media/v4l2-mediabus.h | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 6114007..586fc44 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -22,8 +22,12 @@ */ #define V4L2_MBUS_MASTER (1 << 0) #define V4L2_MBUS_SLAVE (1 << 1) -/* Which signal polarities it supports */ -/* Note: in BT.656 mode HSYNC and VSYNC are unused */ +/* + * Signal polarity flags + * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused + * V4L2_MBUS_[HV]SYNC_* flags should be also used for specifying + * configuration of hardware that uses [HV]REF signals + */ #define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) #define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) #define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) @@ -32,6 +36,9 @@ #define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) #define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) #define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) +/* Field selection signal for interlaced scan mode */ +#define V4L2_MBUS_FIELD_ACTIVE_HIGH (1 << 12) +#define V4L2_MBUS_FIELD_ACTIVE_LOW (1 << 13) /* Serial flags */ /* How many lanes the client can use */ -- 1.7.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
