Hello, Watching television works out of the box, but the remote control does not work by default. The remote uses the NEC protocol as is also noted on http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS#Cinergy_T_USB_XXS_.28HD.29_.280ccd:00ab.29 However the RC5 protocol is loaded with a wrong keymap. This is the command that made the remote work: ir-keytab --sysdev rc1 -w /lib/udev/rc_keymaps/dib0700_nec lsusb output: Bus 001 Device 006: ID 0ccd:00ab TerraTec Electronic GmbH Related discussion: http://linuxtv.org/irc/v4l/index.php?date=2011-09-08 (user: fgfhdfh) Note to Terratec support: last month I bought hardware from LiteOn, Logitech, Spire, Epson, Lexmark, Intel, AMD (ATI), Crucial, MSI, Seagate and Terratec. All hardware works flawlessly out of the box or after installation of software from the vendor, except for Terratec. Inexperienced people will think their Terratec hardware is broken in a case like this. Can you guys regularly test your hardware and send reports like this to the linux-media mailing list (if something is broken)? With the expected growth of Linux-based Android tablets, the number of inexperienced people that will think Terratec hardware is broken could only increase (if they want to use a Terratec USB device to watch television on their tablet). -- Mvg, Sander Devrieze. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html