Hi Sakari, On Wednesday 31 August 2011 21:47:11 Sakari Ailus wrote: > On Wed, Aug 31, 2011 at 06:31:59PM +0200, Laurent Pinchart wrote: > > Those features are half-implemented and not used. Remove them. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > --- > > > > drivers/media/video/omap3isp/ispccdc.c | 42 > > +++---------------------------- drivers/media/video/omap3isp/ispccdc.h > > | 18 ------------- > > 2 files changed, 4 insertions(+), 56 deletions(-) > > > > diff --git a/drivers/media/video/omap3isp/ispccdc.c > > b/drivers/media/video/omap3isp/ispccdc.c index 40b141c..176efae 100644 > > --- a/drivers/media/video/omap3isp/ispccdc.c > > +++ b/drivers/media/video/omap3isp/ispccdc.c > > @@ -965,13 +965,11 @@ static void ccdc_config_sync_if(struct > > isp_ccdc_device *ccdc, > > > > u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, > > > > ISPCCDC_SYN_MODE); > > > > + syn_mode &= ~(ISPCCDC_SYN_MODE_FLDSTAT | ISPCCDC_SYN_MODE_EXWEN | > > + ISPCCDC_SYN_MODE_FLDMODE | ISPCCDC_SYN_MODE_FLDPOL | > > + ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT); > > This might be a silly question but is there a need to read some bits from > the the register? It seems to me that awfully many of the will always get > overwritten. I've been thinking about that as well. The only bits we won't overwrite are the reserved bits. I guess we can just write them to 0. > > syn_mode |= ISPCCDC_SYN_MODE_VDHDEN; > > > > - if (syncif->fldstat) > > - syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT; > > - else > > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT; > > - > > > > syn_mode &= ~ISPCCDC_SYN_MODE_DATSIZ_MASK; > > switch (syncif->datsz) { > > > > case 8: > > @@ -988,21 +986,11 @@ static void ccdc_config_sync_if(struct > > isp_ccdc_device *ccdc, > > > > break; > > > > }; > > > > - if (syncif->fldmode) > > - syn_mode |= ISPCCDC_SYN_MODE_FLDMODE; > > - else > > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE; > > - > > > > if (syncif->datapol) > > > > syn_mode |= ISPCCDC_SYN_MODE_DATAPOL; > > > > else > > > > syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL; > > > > - if (syncif->fldpol) > > - syn_mode |= ISPCCDC_SYN_MODE_FLDPOL; > > - else > > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL; > > - > > > > if (syncif->hdpol) > > > > syn_mode |= ISPCCDC_SYN_MODE_HDPOL; > > > > else > > > > @@ -1013,23 +1001,6 @@ static void ccdc_config_sync_if(struct > > isp_ccdc_device *ccdc, > > > > else > > > > syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL; > > > > - if (syncif->ccdc_mastermode) { > > - syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT; > > - isp_reg_writel(isp, > > - syncif->hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT > > - | syncif->vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT, > > - OMAP3_ISP_IOMEM_CCDC, > > - ISPCCDC_HD_VD_WID); > > - > > - isp_reg_writel(isp, > > - syncif->ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT > > - | syncif->hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT, > > - OMAP3_ISP_IOMEM_CCDC, > > - ISPCCDC_PIX_LINES); > > - } else > > - syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT | > > - ISPCCDC_SYN_MODE_VDHDOUT); > > - > > > > isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); > > > > if (!syncif->bt_r656_en) > > > > @@ -1148,6 +1119,7 @@ static void ccdc_configure(struct isp_ccdc_device > > *ccdc) > > > > omap3isp_configure_bridge(isp, ccdc->input, pdata, shift); > > > > ccdc->syncif.datsz = depth_out; > > > > + ccdc->syncif.datapol = 0; > > > > ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0; > > ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0; > > ccdc_config_sync_if(ccdc, &ccdc->syncif); > > > > @@ -2258,13 +2230,7 @@ int omap3isp_ccdc_init(struct isp_device *isp) > > > > INIT_LIST_HEAD(&ccdc->lsc.free_queue); > > spin_lock_init(&ccdc->lsc.req_lock); > > > > - ccdc->syncif.ccdc_mastermode = 0; > > - ccdc->syncif.datapol = 0; > > > > ccdc->syncif.datsz = 0; > > > > - ccdc->syncif.fldmode = 0; > > - ccdc->syncif.fldout = 0; > > - ccdc->syncif.fldpol = 0; > > - ccdc->syncif.fldstat = 0; > > > > ccdc->clamp.oblen = 0; > > ccdc->clamp.dcsubval = 0; > > > > diff --git a/drivers/media/video/omap3isp/ispccdc.h > > b/drivers/media/video/omap3isp/ispccdc.h index 483a19c..0e98f10 100644 > > --- a/drivers/media/video/omap3isp/ispccdc.h > > +++ b/drivers/media/video/omap3isp/ispccdc.h > > @@ -48,35 +48,17 @@ enum ccdc_input_entity { > > > > /* > > > > * struct ispccdc_syncif - Structure for Sync Interface between sensor > > and CCDC > > > > - * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave. > > - * @fldstat: Field state. 0 - Odd Field, 1 - Even Field. > > > > * @datsz: Data size. > > > > - * @fldmode: 0 - Progressive, 1 - Interlaced. > > > > * @datapol: 0 - Positive, 1 - Negative. > > > > - * @fldpol: 0 - Positive, 1 - Negative. > > > > * @hdpol: 0 - Positive, 1 - Negative. > > * @vdpol: 0 - Positive, 1 - Negative. > > > > - * @fldout: 0 - Input, 1 - Output. > > - * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output. > > - * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output. > > - * @ppln: Number of pixels per line, used for HS/VS Output. > > - * @hlprf: Number of half lines per frame, used for HS/VS Output. > > > > * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode. > > */ > > > > struct ispccdc_syncif { > > > > - u8 ccdc_mastermode; > > - u8 fldstat; > > > > u8 datsz; > > > > - u8 fldmode; > > > > u8 datapol; > > > > - u8 fldpol; > > > > u8 hdpol; > > u8 vdpol; > > > > - u8 fldout; > > - u8 hs_width; > > - u8 vs_width; > > - u8 ppln; > > - u8 hlprf; > > > > u8 bt_r656_en; > > > > }; -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html