From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
v4l-dvb-git/drivers/media/dvb/dvb-usb/az6027.c: In function 'az6027_set_voltage':
v4l-dvb-git/drivers/media/dvb/dvb-usb/az6027.c:785:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
v4l-dvb-git/drivers/media/dvb/dvb-usb/az6027.c: In function 'az6027_i2c_xfer':
v4l-dvb-git/drivers/media/dvb/dvb-usb/az6027.c:957:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/dvb/dvb-usb/az6027.c | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index d59430c..bf389f4 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -782,7 +782,6 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
u8 buf;
- int ret;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct i2c_msg i2c_msg = {
@@ -800,17 +799,17 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
switch (voltage) {
case SEC_VOLTAGE_13:
buf = 1;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_18:
buf = 2;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_OFF:
buf = 0;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
default:
@@ -954,7 +953,6 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i = 0, j = 0, len = 0;
- int ret;
u16 index;
u16 value;
int length;
@@ -990,7 +988,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
value = msg[i].addr + (msg[i].len << 8);
length = msg[i + 1].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i + 1].len;
for (j = 0; j < len; j++)
msg[i + 1].buf[j] = data[j + 5];
@@ -1017,7 +1015,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
index = 0x0;
value = msg[i].addr;
length = msg[i].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i].len;
for (j = 0; j < len; j++)
msg[i].buf[j] = data[j + 5];
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
