Hi,
I encounter a really strange problem with (I guess) linux DVB driver, I
will try to be as clear as possible.
I have installed a clean debian squeeze and I choosed to use the debian
backport kernel (2.6.38-bpo.2-686). I use a Satelco Easywatch DVBS (KNC
One) with the budget_av driver, I have also a CI interface and two CAM
(one Neotion Viacess and one Aston Viacess).
To control the card I use a soft of my own that seems to be OK with
several DVB hardware until now (please tell me if you need any
information about how it works).
On my first sandbox machine everything was fine (MACHINE 1). The card is
OK and both CAM are working fine. Then I try to put the SAME hard drive
+ DVB card + DVB CI + CAM in an two other machine (MACHINE 2, MACHINE 3)
and it does not works with the Neotion Viacess CAM even if the Aston
Viacess CAM is working fine.
Because I have no idea where the problem come from I will try to give
you as much information as I can (CPU information, PCI information,
module logs), please tell me if you need more.
If you have any idea where the problem com from...
---------------------------------------------------------------------------
---------------------------------------------------------------------------
MACHINE 1 (WORK)
---------------------------------------------------------------------------
CPU INFO :
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz
stepping : 13
cpu MHz : 2400.358
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc up arch_perfmon pebs bts aperfmperf pni dtes64 monitor
ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts
bogomips : 4800.71
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
---------------------------------------------------------------------------
PCI INFO :
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation 82865G Integrated Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at f8500000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at da00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 3f800000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 24d2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at e300 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 24d2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 24d2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 4: I/O ports at d900 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at f8580000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8400000-f84fffff
Prefetchable memory behind bridge: 3f700000-3f7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 24d2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 3f801000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller
(rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation 82801EB (ICH5) SATA Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at db00 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at dd00 [size=8]
Region 3: I/O ports at de00 [size=4]
Region 4: I/O ports at df00 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
Subsystem: Intel Corporation Device 24d2
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at f8422000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 3f700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at f8420000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 3f720000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
01:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One Device 001b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8421000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
---------------------------------------------------------------------------
DVB KMESG :
<4>[ 39.220168] budget_av: ciintf_slot_reset(): ciintf_slot_reset
<4>[ 39.400020] TUPLE type:0x1d length:4
<4>[ 39.408025] 0x00: 0x00 .
<4>[ 39.416026] 0x01: 0xdb .
<4>[ 39.424025] 0x02: 0x08 .
<4>[ 39.432025] 0x03: 0xff .
<4>[ 39.448023] TUPLE type:0x1c length:3
<4>[ 39.456025] 0x00: 0x00 .
<4>[ 39.464025] 0x01: 0x08 .
<4>[ 39.472025] 0x02: 0xff .
<4>[ 39.488023] TUPLE type:0x15 length:18
<4>[ 39.496024] 0x00: 0x05 .
<4>[ 39.504025] 0x01: 0x00 .
<4>[ 39.512025] 0x02: 0x4e N
<4>[ 39.520025] 0x03: 0x45 E
<4>[ 39.528025] 0x04: 0x4f O
<4>[ 39.536025] 0x05: 0x54 T
<4>[ 39.544025] 0x06: 0x49 I
<4>[ 39.552025] 0x07: 0x4f O
<4>[ 39.560025] 0x08: 0x4e N
<4>[ 39.568032] 0x09: 0x00 .
<4>[ 39.576025] 0x0a: 0x43 C
<4>[ 39.584031] 0x0b: 0x41 A
<4>[ 39.592025] 0x0c: 0x4d M
<4>[ 39.600025] 0x0d: 0x00 .
<4>[ 39.608025] 0x0e: 0x43 C
<4>[ 39.616025] 0x0f: 0x49 I
<4>[ 39.624025] 0x10: 0x00 .
<4>[ 39.632025] 0x11: 0xff .
<4>[ 39.648023] TUPLE type:0x20 length:4
<4>[ 39.656024] 0x00: 0xff .
<4>[ 39.664025] 0x01: 0xff .
<4>[ 39.672025] 0x02: 0x01 .
<4>[ 39.680025] 0x03: 0x00 .
<4>[ 39.696023] TUPLE type:0x1a length:21
<4>[ 39.704024] 0x00: 0x01 .
<4>[ 39.712025] 0x01: 0x0f .
<4>[ 39.720025] 0x02: 0xfe .
<4>[ 39.728025] 0x03: 0x01 .
<4>[ 39.736025] 0x04: 0x01 .
<4>[ 39.744025] 0x05: 0xc0 .
<4>[ 39.752025] 0x06: 0x0e .
<4>[ 39.760025] 0x07: 0x41 A
<4>[ 39.768029] 0x08: 0x02 .
<4>[ 39.776025] 0x09: 0x44 D
<4>[ 39.784025] 0x0a: 0x56 V
<4>[ 39.792025] 0x0b: 0x42 B
<4>[ 39.800025] 0x0c: 0x5f _
<4>[ 39.808025] 0x0d: 0x43 C
<4>[ 39.816029] 0x0e: 0x49 I
<4>[ 39.824025] 0x0f: 0x5f _
<4>[ 39.832031] 0x10: 0x56 V
<4>[ 39.840025] 0x11: 0x31 1
<4>[ 39.848025] 0x12: 0x2e .
<4>[ 39.856025] 0x13: 0x30 0
<4>[ 39.864025] 0x14: 0x30 0
<4>[ 39.880023] TUPLE type:0x1b length:14
<4>[ 39.888024] 0x00: 0xc2 .
<4>[ 39.896025] 0x01: 0x41 A
<4>[ 39.904025] 0x02: 0x09 .
<4>[ 39.912025] 0x03: 0x37 7
<4>[ 39.920025] 0x04: 0x55 U
<4>[ 39.928025] 0x05: 0x4d M
<4>[ 39.936025] 0x06: 0x5d ]
<4>[ 39.944025] 0x07: 0x56 V
<4>[ 39.952025] 0x08: 0x56 V
<4>[ 39.960025] 0x09: 0xaa .
<4>[ 39.968030] 0x0a: 0x60 `
<4>[ 39.976025] 0x0b: 0x20
<4>[ 39.984025] 0x0c: 0x03 .
<4>[ 39.992025] 0x0d: 0x03 .
<4>[ 40.008023] TUPLE type:0x1b length:38
<4>[ 40.016024] 0x00: 0xcf .
<4>[ 40.024025] 0x01: 0x04 .
<4>[ 40.032025] 0x02: 0x19 .
<4>[ 40.040025] 0x03: 0x37 7
<4>[ 40.048025] 0x04: 0x55 U
<4>[ 40.056025] 0x05: 0x4d M
<4>[ 40.064025] 0x06: 0x5d ]
<4>[ 40.072025] 0x07: 0x56 V
<4>[ 40.080031] 0x08: 0x56 V
<4>[ 40.088025] 0x09: 0x22 "
<4>[ 40.096025] 0x0a: 0x20
<4>[ 40.104025] 0x0b: 0xc0 .
<4>[ 40.112025] 0x0c: 0x09 .
<4>[ 40.120025] 0x0d: 0x44 D
<4>[ 40.128025] 0x0e: 0x56 V
<4>[ 40.136025] 0x0f: 0x42 B
<4>[ 40.144025] 0x10: 0x5f _
<4>[ 40.152025] 0x11: 0x48 H
<4>[ 40.160025] 0x12: 0x4f O
<4>[ 40.168029] 0x13: 0x53 S
<4>[ 40.176025] 0x14: 0x54 T
<4>[ 40.184025] 0x15: 0x00 .
<4>[ 40.192025] 0x16: 0xc1 .
<4>[ 40.200025] 0x17: 0x0e .
<4>[ 40.208025] 0x18: 0x44 D
<4>[ 40.216025] 0x19: 0x56 V
<4>[ 40.224025] 0x1a: 0x42 B
<4>[ 40.232025] 0x1b: 0x5f _
<4>[ 40.240025] 0x1c: 0x43 C
<4>[ 40.248025] 0x1d: 0x49 I
<4>[ 40.256022] 0x1e: 0x5f _
<4>[ 40.264022] 0x1f: 0x4d M
<4>[ 40.272022] 0x20: 0x4f O
<4>[ 40.280021] 0x21: 0x44 D
<4>[ 40.288022] 0x22: 0x55 U
<4>[ 40.296021] 0x23: 0x4c L
<4>[ 40.304023] 0x24: 0x45 E
<4>[ 40.312022] 0x25: 0x00 .
<4>[ 40.328028] TUPLE type:0x14 length:0
<4>[ 40.336024] END OF CHAIN TUPLE type:0xff
<4>[ 40.336028] Valid DVB CAM detected MANID:ffff DEVID:1
CONFIGBASE:0x1fe CONFIGOPTION:0xf
<4>[ 40.336033] dvb_ca_en50221_set_configoption
<4>[ 40.352022] Set configoption 0xf, read configoption 0xf
<4>[ 40.352032] DVB CAM validated successfully
<4>[ 40.352043] dvb_ca_en50221_link_init
<4>[ 40.352052] dvb_ca_en50221_wait_if_status
<4>[ 40.352062] dvb_ca_en50221_wait_if_status succeeded timeout:0
<4>[ 40.352065] dvb_ca_en50221_read_data
<4>[ 40.352117] Received CA packet for slot 0 connection id 0x1
last_frag:1 size:0x2
<4>[ 40.352126] Chosen link buffer size of 256
<4>[ 40.352133] dvb_ca_en50221_wait_if_status
<4>[ 40.352141] dvb_ca_en50221_wait_if_status succeeded timeout:0
<4>[ 40.352143] dvb_ca_en50221_write_data
<4>[ 40.352197] Wrote CA packet for slot 0, connection id 0x1
last_frag:1 size:0x2
<4>[ 40.352229] budget_av: ciintf_slot_ts_enable():
ciintf_slot_ts_enable: 8
<4>[ 40.352232] dvb_ca adapter 0: DVB CAM detected and initialised
successfully
<4>[ 40.452031] dvb_ca_en50221_read_data
<4>[ 40.552032] dvb_ca_en50221_read_data
<4>[ 40.652019] dvb_ca_en50221_read_data
<4>[ 40.752021] dvb_ca_en50221_read_data
<4>[ 40.852093] dvb_ca_en50221_read_data
<4>[ 40.952019] dvb_ca_en50221_read_data
<4>[ 41.052020] dvb_ca_en50221_read_data
<4>[ 41.152018] dvb_ca_en50221_read_data
<4>[ 41.252022] dvb_ca_en50221_read_data
<4>[ 41.352021] dvb_ca_en50221_read_data
<4>[ 41.452017] dvb_ca_en50221_read_data
<4>[ 41.552026] dvb_ca_en50221_read_data
<4>[ 41.652014] dvb_ca_en50221_read_data
<4>[ 41.752029] dvb_ca_en50221_read_data
<4>[ 41.852017] dvb_ca_en50221_read_data
<4>[ 41.952024] dvb_ca_en50221_read_data
<4>[ 42.052015] dvb_ca_en50221_read_data
<4>[ 42.152025] dvb_ca_en50221_read_data
<4>[ 42.252014] dvb_ca_en50221_read_data
<4>[ 42.352018] dvb_ca_en50221_read_data
<4>[ 42.452024] dvb_ca_en50221_read_data
<4>[ 42.552013] dvb_ca_en50221_read_data
<4>[ 42.652028] dvb_ca_en50221_read_data
<4>[ 42.752013] dvb_ca_en50221_read_data
<4>[ 42.852020] dvb_ca_en50221_read_data
<4>[ 42.952022] dvb_ca_en50221_read_data
<4>[ 43.052018] dvb_ca_en50221_read_data
<4>[ 43.152026] dvb_ca_en50221_read_data
<4>[ 43.252011] dvb_ca_en50221_read_data
<4>[ 43.352021] dvb_ca_en50221_read_data
<4>[ 43.452017] dvb_ca_en50221_read_data
<4>[ 43.552032] dvb_ca_en50221_read_data
<4>[ 43.652014] dvb_ca_en50221_read_data
<4>[ 43.752028] dvb_ca_en50221_read_data
<4>[ 43.852019] dvb_ca_en50221_read_data
<4>[ 43.952020] dvb_ca_en50221_read_data
<4>[ 44.052018] dvb_ca_en50221_read_data
<4>[ 44.152017] dvb_ca_en50221_read_data
<4>[ 44.220370] dvb_ca_en50221_io_do_ioctl
<4>[ 44.220376] dvb_ca_en50221_io_do_ioctl
<4>[ 44.220385] dvb_ca_en50221_io_poll
<4>[ 44.240453] dvb_ca_en50221_io_poll
<4>[ 44.240576] dvb_ca_en50221_io_write
<4>[ 44.240578] dvb_ca_en50221_write_data
<4>[ 44.240653] Wrote CA packet for slot 0, connection id 0x1
last_frag:1 size:0x5
<4>[ 44.240696] dvb_ca_en50221_io_do_ioctl
<4>[ 44.240698] dvb_ca_en50221_io_poll
<4>[ 44.252033] dvb_ca_en50221_read_data
<4>[ 44.252136] Received CA packet for slot 0 connection id 0x1
last_frag:1 size:0x9
<4>[ 44.252138] dvb_ca_en50221_read_data
<4>[ 44.252148] dvb_ca_en50221_io_poll
<4>[ 44.252153] dvb_ca_en50221_io_read
<4>[ 44.252192] dvb_ca_en50221_io_poll
<4>[ 44.272260] dvb_ca_en50221_io_poll
<4>[ 44.272347] dvb_ca_en50221_io_write
<4>[ 44.272350] dvb_ca_en50221_write_data
<4>[ 44.272431] Wrote CA packet for slot 0, connection id 0x1
last_frag:1 size:0x5
<4>[ 44.272443] dvb_ca_en50221_io_do_ioctl
<4>[ 44.272445] dvb_ca_en50221_io_poll
ECT...
---------------------------------------------------------------------------
---------------------------------------------------------------------------
MACHINE 2 (DON'T WORK)
---------------------------------------------------------------------------
CPU INFO :
processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 9
model name : VIA Nehemiah
stepping : 8
cpu MHz : 1002.222
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr cx8 sep mtrr pge cmov pat mmx fxsr
sse up rng rng_en ace ace_en
bogomips : 2004.44
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
---------------------------------------------------------------------------
PCI INFO :
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d8000000-dbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S
[Rhine-III] (rev 8b)
Subsystem: VIA Technologies, Inc. Device 0106
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 12
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at de001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Device aa01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded
Ethernet Controller on VT8235
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at de002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One Device 001b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at de003000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA
controller])
Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated
CastleRock graphics
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 255
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at dd000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
---------------------------------------------------------------------------
DVB KMESG :
<4>[ 28.846120] budget_av: ciintf_slot_reset(): ciintf_slot_reset
<4>[ 29.000072] TUPLE type:0x1d length:4
<4>[ 29.000089] 0x00: 0x00 .
<4>[ 29.000102] 0x01: 0xdb .
<4>[ 29.000115] 0x02: 0x08 .
<4>[ 29.000128] 0x03: 0xff .
<4>[ 29.000146] TUPLE type:0x1c length:3
<4>[ 29.000159] 0x00: 0x00 .
<4>[ 29.000172] 0x01: 0x08 .
<4>[ 29.000184] 0x02: 0xff .
<4>[ 29.000203] TUPLE type:0x15 length:18
<4>[ 29.000216] 0x00: 0x05 .
<4>[ 29.000228] 0x01: 0x00 .
<4>[ 29.000241] 0x02: 0x4e N
<4>[ 29.000253] 0x03: 0x45 E
<4>[ 29.000266] 0x04: 0x4f O
<4>[ 29.000278] 0x05: 0x54 T
<4>[ 29.000291] 0x06: 0x49 I
<4>[ 29.000303] 0x07: 0x4f O
<4>[ 29.000316] 0x08: 0x4e N
<4>[ 29.000328] 0x09: 0x00 .
<4>[ 29.000341] 0x0a: 0x43 C
<4>[ 29.000354] 0x0b: 0x41 A
<4>[ 29.000366] 0x0c: 0x4d M
<4>[ 29.000378] 0x0d: 0x00 .
<4>[ 29.000391] 0x0e: 0x43 C
<4>[ 29.000403] 0x0f: 0x49 I
<4>[ 29.000416] 0x10: 0x00 .
<4>[ 29.000428] 0x11: 0xff .
<4>[ 29.000447] TUPLE type:0x20 length:4
<4>[ 29.000460] 0x00: 0xff .
<4>[ 29.000472] 0x01: 0xff .
<4>[ 29.000485] 0x02: 0x01 .
<4>[ 29.000497] 0x03: 0x00 .
<4>[ 29.000516] TUPLE type:0x1a length:21
<4>[ 29.000529] 0x00: 0x01 .
<4>[ 29.000541] 0x01: 0x0f .
<4>[ 29.000554] 0x02: 0xfe .
<4>[ 29.000566] 0x03: 0x01 .
<4>[ 29.000579] 0x04: 0x01 .
<4>[ 29.000591] 0x05: 0xc0 .
<4>[ 29.000604] 0x06: 0x0e .
<4>[ 29.000616] 0x07: 0x41 A
<4>[ 29.000629] 0x08: 0x02 .
<4>[ 29.000641] 0x09: 0x44 D
<4>[ 29.000654] 0x0a: 0x56 V
<4>[ 29.000666] 0x0b: 0x42 B
<4>[ 29.000679] 0x0c: 0x5f _
<4>[ 29.000691] 0x0d: 0x43 C
<4>[ 29.000704] 0x0e: 0x49 I
<4>[ 29.000716] 0x0f: 0x5f _
<4>[ 29.000729] 0x10: 0x56 V
<4>[ 29.000741] 0x11: 0x31 1
<4>[ 29.000754] 0x12: 0x2e .
<4>[ 29.000766] 0x13: 0x30 0
<4>[ 29.000779] 0x14: 0x30 0
<4>[ 29.000799] TUPLE type:0x1b length:14
<4>[ 29.000812] 0x00: 0xc2 .
<4>[ 29.000825] 0x01: 0x41 A
<4>[ 29.000837] 0x02: 0x09 .
<4>[ 29.000850] 0x03: 0x37 7
<4>[ 29.000862] 0x04: 0x55 U
<4>[ 29.000875] 0x05: 0x4d M
<4>[ 29.000887] 0x06: 0x5d ]
<4>[ 29.000900] 0x07: 0x56 V
<4>[ 29.000912] 0x08: 0x56 V
<4>[ 29.000925] 0x09: 0xaa .
<4>[ 29.000937] 0x0a: 0x60 `
<4>[ 29.000950] 0x0b: 0x20
<4>[ 29.000962] 0x0c: 0x03 .
<4>[ 29.000975] 0x0d: 0x03 .
<4>[ 29.000993] TUPLE type:0x1b length:38
<4>[ 29.001007] 0x00: 0xcf .
<4>[ 29.001019] 0x01: 0x04 .
<4>[ 29.001032] 0x02: 0x19 .
<4>[ 29.001044] 0x03: 0x37 7
<4>[ 29.001057] 0x04: 0x55 U
<4>[ 29.001069] 0x05: 0x4d M
<4>[ 29.001082] 0x06: 0x5d ]
<4>[ 29.001094] 0x07: 0x56 V
<4>[ 29.001107] 0x08: 0x56 V
<4>[ 29.001119] 0x09: 0x22 "
<4>[ 29.001132] 0x0a: 0x20
<4>[ 29.001144] 0x0b: 0xc0 .
<4>[ 29.001157] 0x0c: 0x09 .
<4>[ 29.001169] 0x0d: 0x44 D
<4>[ 29.001182] 0x0e: 0x56 V
<4>[ 29.001194] 0x0f: 0x42 B
<4>[ 29.001207] 0x10: 0x5f _
<4>[ 29.001219] 0x11: 0x48 H
<4>[ 29.001232] 0x12: 0x4f O
<4>[ 29.001244] 0x13: 0x53 S
<4>[ 29.001257] 0x14: 0x54 T
<4>[ 29.001269] 0x15: 0x00 .
<4>[ 29.001282] 0x16: 0xc1 .
<4>[ 29.001294] 0x17: 0x0e .
<4>[ 29.001307] 0x18: 0x44 D
<4>[ 29.001320] 0x19: 0x56 V
<4>[ 29.001332] 0x1a: 0x42 B
<4>[ 29.001345] 0x1b: 0x5f _
<4>[ 29.001357] 0x1c: 0x43 C
<4>[ 29.001369] 0x1d: 0x49 I
<4>[ 29.001382] 0x1e: 0x5f _
<4>[ 29.001394] 0x1f: 0x4d M
<4>[ 29.001407] 0x20: 0x4f O
<4>[ 29.001420] 0x21: 0x44 D
<4>[ 29.001432] 0x22: 0x55 U
<4>[ 29.001445] 0x23: 0x4c L
<4>[ 29.001457] 0x24: 0x45 E
<4>[ 29.001470] 0x25: 0x00 .
<4>[ 29.001490] TUPLE type:0x14 length:0
<4>[ 29.001503] END OF CHAIN TUPLE type:0xff
<4>[ 29.001513] Valid DVB CAM detected MANID:ffff DEVID:1
CONFIGBASE:0x1fe CONFIGOPTION:0xf
<4>[ 29.001523] dvb_ca_en50221_set_configoption
<4>[ 29.001543] Set configoption 0xf, read configoption 0xf
<4>[ 29.001556] DVB CAM validated successfully
<4>[ 29.500060] dvb_ca_en50221_link_init
<4>[ 29.500078] dvb_ca_en50221_wait_if_status
<4>[ 29.604054] dvb_ca_en50221_wait_if_status failed timeout:26
<4>[ 29.604071] dvb_ca adapter 0: DVB CAM link initialisation failed :(
<4>[ 33.846693] dvb_ca_en50221_io_do_ioctl
---------------------------------------------------------------------------
---------------------------------------------------------------------------
MACHINE 3
---------------------------------------------------------------------------
CPU INFO :
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E5400 @ 2.70GHz
stepping : 10
cpu MHz : 2691.722
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dts tpr_shadow vnmi
flexpriority
bogomips : 5383.44
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E5400 @ 2.70GHz
stepping : 10
cpu MHz : 2691.722
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dts tpr_shadow vnmi
flexpriority
bogomips : 5382.86
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
---------------------------------------------------------------------------
PCI INFO :
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller
(rev 02)
Subsystem: Intel Corporation 82Q35 Express DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express
Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation 82Q35 Express Integrated Graphics
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4189
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Optiplex 755
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Optiplex 755
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Optiplex 755
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe87bc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 3f700000-3f8fffff
Prefetchable memory behind bridge: 000000003f900000-000000003fafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4159
Capabilities: [90] Subsystem: Intel Corporation Optiplex 755
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: 3fb00000-3fcfffff
Prefetchable memory behind bridge: 000000003fd00000-000000003fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9
Family) PCI Express Port 2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 000000003ff00000-00000000400fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9
Family) PCI Express Port 3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=03 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 0000000040100000-00000000402fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4171
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9
Family) PCI Express Port 4
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=04 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe87b800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if
01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
Subsystem: Intel Corporation 82801IR (ICH9R) LPC Interface Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port
SATA IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at c080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at b880 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b480 [size=16]
Region 5: I/O ports at b400 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
(prog-if 85 [Master SecO PriO])
Subsystem: JMicron Technology Corp. Device 2361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency
L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M
Gigabit Ethernet PCI Express (rev 02)
Subsystem: Broadcom Corporation Device 9693
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetLink Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95787m
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum good, 29 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 10d011c14202c378 Data: 0e00
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-18-7d-ff-fe-12-da-10
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: tg3
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M
Gigabit Ethernet PCI Express (rev 02)
Subsystem: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet
PCI Express
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95751
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 26 byte(s) reserved
No end tag found
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4191
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-18-7d-ff-fe-12-da-11
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: tg3
05:00.0 ISA bridge: Winbond Electronics Corp Device 0628
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0
05:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One Device 001b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
---------------------------------------------------------------------------
DVB KMESG :
<4>[ 465.860057] budget_av: ciintf_slot_reset(): ciintf_slot_reset
<4>[ 466.016045] TUPLE type:0x1d length:4
<4>[ 466.016056] 0x00: 0x00 .
<4>[ 466.016066] 0x01: 0xdb .
<4>[ 466.016075] 0x02: 0x08 .
<4>[ 466.016085] 0x03: 0xff .
<4>[ 466.016101] TUPLE type:0x1c length:3
<4>[ 466.016111] 0x00: 0x00 .
<4>[ 466.016120] 0x01: 0x08 .
<4>[ 466.016130] 0x02: 0xff .
<4>[ 466.016146] TUPLE type:0x15 length:18
<4>[ 466.016156] 0x00: 0x05 .
<4>[ 466.016165] 0x01: 0x00 .
<4>[ 466.016175] 0x02: 0x4e N
<4>[ 466.016184] 0x03: 0x45 E
<4>[ 466.016194] 0x04: 0x4f O
<4>[ 466.016208] 0x05: 0x54 T
<4>[ 466.016216] 0x06: 0x49 I
<4>[ 466.016224] 0x07: 0x4f O
<4>[ 466.016231] 0x08: 0x4e N
<4>[ 466.016239] 0x09: 0x00 .
<4>[ 466.016247] 0x0a: 0x43 C
<4>[ 466.016255] 0x0b: 0x41 A
<4>[ 466.016263] 0x0c: 0x4d M
<4>[ 466.016271] 0x0d: 0x00 .
<4>[ 466.016278] 0x0e: 0x43 C
<4>[ 466.016286] 0x0f: 0x49 I
<4>[ 466.016294] 0x10: 0x00 .
<4>[ 466.016302] 0x11: 0xff .
<4>[ 466.016316] TUPLE type:0x20 length:4
<4>[ 466.016324] 0x00: 0xff .
<4>[ 466.016332] 0x01: 0xff .
<4>[ 466.016340] 0x02: 0x01 .
<4>[ 466.016348] 0x03: 0x00 .
<4>[ 466.016362] TUPLE type:0x1a length:21
<4>[ 466.016370] 0x00: 0x01 .
<4>[ 466.016378] 0x01: 0x0f .
<4>[ 466.016386] 0x02: 0xfe .
<4>[ 466.016394] 0x03: 0x01 .
<4>[ 466.016401] 0x04: 0x01 .
<4>[ 466.016409] 0x05: 0xc0 .
<4>[ 466.016417] 0x06: 0x0e .
<4>[ 466.016425] 0x07: 0x41 A
<4>[ 466.016433] 0x08: 0x02 .
<4>[ 466.016440] 0x09: 0x44 D
<4>[ 466.016448] 0x0a: 0x56 V
<4>[ 466.016456] 0x0b: 0x42 B
<4>[ 466.016464] 0x0c: 0x5f _
<4>[ 466.016472] 0x0d: 0x43 C
<4>[ 466.016479] 0x0e: 0x49 I
<4>[ 466.016487] 0x0f: 0x5f _
<4>[ 466.016495] 0x10: 0x56 V
<4>[ 466.016503] 0x11: 0x31 1
<4>[ 466.016511] 0x12: 0x2e .
<4>[ 466.016518] 0x13: 0x30 0
<4>[ 466.016526] 0x14: 0x30 0
<4>[ 466.016541] TUPLE type:0x1b length:14
<4>[ 466.016549] 0x00: 0xc2 .
<4>[ 466.016557] 0x01: 0x41 A
<4>[ 466.016565] 0x02: 0x09 .
<4>[ 466.016573] 0x03: 0x37 7
<4>[ 466.016580] 0x04: 0x55 U
<4>[ 466.016588] 0x05: 0x4d M
<4>[ 466.016596] 0x06: 0x5d ]
<4>[ 466.016604] 0x07: 0x56 V
<4>[ 466.016612] 0x08: 0x56 V
<4>[ 466.016619] 0x09: 0xaa .
<4>[ 466.016627] 0x0a: 0x60 `
<4>[ 466.016635] 0x0b: 0x20
<4>[ 466.016643] 0x0c: 0x03 .
<4>[ 466.016651] 0x0d: 0x03 .
<4>[ 466.016665] TUPLE type:0x1b length:38
<4>[ 466.016673] 0x00: 0xcf .
<4>[ 466.016681] 0x01: 0x04 .
<4>[ 466.016689] 0x02: 0x19 .
<4>[ 466.016697] 0x03: 0x37 7
<4>[ 466.016704] 0x04: 0x55 U
<4>[ 466.016712] 0x05: 0x4d M
<4>[ 466.016720] 0x06: 0x5d ]
<4>[ 466.016728] 0x07: 0x56 V
<4>[ 466.016736] 0x08: 0x56 V
<4>[ 466.016743] 0x09: 0x22 "
<4>[ 466.016751] 0x0a: 0x20
<4>[ 466.016759] 0x0b: 0xc0 .
<4>[ 466.016767] 0x0c: 0x09 .
<4>[ 466.016775] 0x0d: 0x44 D
<4>[ 466.016782] 0x0e: 0x56 V
<4>[ 466.016790] 0x0f: 0x42 B
<4>[ 466.016798] 0x10: 0x5f _
<4>[ 466.016806] 0x11: 0x48 H
<4>[ 466.016814] 0x12: 0x4f O
<4>[ 466.016821] 0x13: 0x53 S
<4>[ 466.016829] 0x14: 0x54 T
<4>[ 466.016837] 0x15: 0x00 .
<4>[ 466.016845] 0x16: 0xc1 .
<4>[ 466.016853] 0x17: 0x0e .
<4>[ 466.016860] 0x18: 0x44 D
<4>[ 466.016868] 0x19: 0x56 V
<4>[ 466.016876] 0x1a: 0x42 B
<4>[ 466.016884] 0x1b: 0x5f _
<4>[ 466.016892] 0x1c: 0x43 C
<4>[ 466.016900] 0x1d: 0x49 I
<4>[ 466.016907] 0x1e: 0x5f _
<4>[ 466.016915] 0x1f: 0x4d M
<4>[ 466.016923] 0x20: 0x4f O
<4>[ 466.016931] 0x21: 0x44 D
<4>[ 466.016939] 0x22: 0x55 U
<4>[ 466.016946] 0x23: 0x4c L
<4>[ 466.016954] 0x24: 0x45 E
<4>[ 466.016962] 0x25: 0x00 .
<4>[ 466.016977] TUPLE type:0x14 length:0
<4>[ 466.016985] END OF CHAIN TUPLE type:0xff
<4>[ 466.016987] Valid DVB CAM detected MANID:ffff DEVID:1
CONFIGBASE:0x1fe CONFIGOPTION:0xf
<4>[ 466.016989] dvb_ca_en50221_set_configoption
<4>[ 466.017003] Set configoption 0xf, read configoption 0xf
<4>[ 466.017011] DVB CAM validated successfully
<4>[ 466.516016] dvb_ca_en50221_link_init
<4>[ 466.516025] dvb_ca_en50221_wait_if_status
<4>[ 466.620015] dvb_ca_en50221_wait_if_status failed timeout:26
<4>[ 466.620025] dvb_ca adapter 0: DVB CAM link initialisation failed :(
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Best regards,
Stéphane Railhet
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
