Hi Devin, Devin Heitmueller schrieb: > On Sat, Aug 6, 2011 at 10:44 AM, Steve Wolter <swolter@xxxxxxxxxxxxxxxx> wrote: > > Dear linux-media list, > > > > I have recently bought a Hauppauge WinTV HVR-3300 and am trying to make > > it run with Linux. [...] > > Like the 4400 and 5500, the 3300 uses both DVB-S and DVB-T demodulator > chips for which there is currently no driver. Somebody would have to > write those drivers from > scratch in order for any of those products to be supported. > > In other words, it's not a case of just needing to add a few lines of > code for another board profile. Fair enough, thanks for the feedback, I think that project is out of my scope for now. I'm mainly interested in the analog demodulation at the moment, have the DVB capacity mainly for future use. Do you know anything about the analog TV decoder in there? Is this decoupled from the DVB stuff and could be made to work on its own? If it's any help, I've tried to fiddle around with several forced card options, and tveeprom auto-detects the tuners as: tveeprom 13-0050: Hauppauge model 53009, rev C1F5, serial# 6493293 tveeprom 13-0050: MAC address is 00:0d:fe:63:14:6d tveeprom 13-0050: tuner model is NXP 18271C2 (idx 155, type 54) tveeprom 13-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 13-0050: audio processor is CX23888 (idx 40) tveeprom 13-0050: decoder processor is CX23888 (idx 34) tveeprom 13-0050: has no radio, has IR receiver, has no IR transmitter Best regards, Steve -- Steve Wolter ( Würzburg Univ.) | Web page: http://swolter.sdf1.org | vCard: http://swolter.sdf1.org/swolter.vcf A witty saying proves nothing. | Schedule: http://swolter.sdf1.org/sched.cgi -- Voltaire (1694-1778) | E-mail: swolter@xxxxxxxxxxxxxxxx
Attachment:
signature.asc
Description: Digital signature
