Hi all, The OMAP 3 ISP driver implements an HS_VS event which is triggered when the reception of a frame begins. This functionality is very, very likely not specific to OMAP 3 ISP so it should be standardised. I have a few patches to do that. Additionally the next expected buffer sequence number is provided with the event, unlike earlier. The questions I had over the RFC (under otherwise same subject field on this list) have been resolved: 1) Other frame synchronisation events, if they ever are needed, can be implemented by using the id field as the line number the event should be triggered on, as proposed by Sylwester and Hans. Currently, the id field is not separately mentioned in the documentation, meaning that FRAME_SYNC events have id field set to 0 meaning frame start. 2) It was also concluded that the buffer sequence number is specific to FRAME_SYNC event and deserves its own struct: struct v4l2_event_frame_sync. Changes to the RFC: - Renamed V4L2_EVENT_FRAME_START to V4L2_EVENT_FRAME_SYNC. - Removed extra reference to V4L2_EVENT_FRAME_START in documentation; it is mentioned in the same page struct v4l2_event_frame_sync is related to it. - The OMAP 3 ISP driver check that the id field is zero in anticipation of such events. -- Sakari Ailus sakari.ailus@xxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
