On 06/14/11 12:43, Issa Gorissen wrote:
On 13/06/2011 00:30, Bart Coninckx wrote:
Hi all,
hope you can help me this one, because there's not a whole of info
about similar problems to be found.
I have a Technotrend S2-3200 with CI and on three different distros I
get this
"dvb_ca adaptor 0: PC card did not respond :(
in /var/log/messages.
Hi Bart,
I've got the same card running under OpenSuse 11.4 and Mythtv 0.24.1
I also have the same warning message, but somehow, when Mythtv grabs the
device, the CAM will be reset successfully (at least, in my case).
In the past, I solved this annoyance by adding a sleep in the CAM init
code [1] relevant to the S2-3200 until I found out Mythtv does something
about it.
[1] drivers/media/dvb/dvb-core/dvb_ca_en50221.c in function
dvb_ca_en50221_thread(void) add a sleep of 5 or 10 secs between the 1st
dprintk and the main loop.
Hope this helps,
--
Issa
Issa,
thx a mille for this. I actually haven't really tried in Mythtv itself,
I was just experimenting with szap and mplayer. But I figured that if
they aren't working there, they would not elsewhere.
I do notice that while taking the card out and putting it back it, the
CAM show as initialized successfully in dmesg.
I will try your suggestion though. Off topic, but would you advice 11.4
in favor of 11.3? As a secondary route, I was thinking about using
sasc-ng (softcamming, legal in this case) and the code seems not to want
to compile on 11.4. Also 11.4 broke after updating the kernel.
thx again!
B.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
