Hi guys, I got some improvements on em28xx to support my device, follow my log: [ 1053.559124] usb 2-2: new high speed USB device using ehci_hcd and address 7 [ 1053.674873] usb 2-2: New USB device found, idVendor=1b80, idProduct=e755 [ 1053.674883] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 1053.674890] usb 2-2: Product: USB 2885 Device [ 1053.674896] usb 2-2: SerialNumber: 1 [ 1063.858533] em28xx: New device USB 2885 Device @ 480 Mbps (1b80:e755, interface 0, class 0) [ 1063.858902] em28xx #0: em28xx chip ID = 68 [ 1063.980947] em28xx #0: board has no eeprom [ 1063.982123] em28xx #0: Identified as C3Tech U-200 FullSeg Hybrid (card=78) [ 1063.982130] em28xx #0: [ 1063.982132] [ 1063.982137] em28xx #0: The support for this board weren't valid yet. [ 1063.982142] em28xx #0: Please send a report of having this working [ 1063.982148] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 1063.982151] [ 1064.000652] i2c-core: driver [tuner] using legacy suspend method [ 1064.000655] i2c-core: driver [tuner] using legacy resume method [ 1064.006098] Chip ID is not zero. It is not a TEA5767 [ 1064.006193] tuner 16-0060: chip found @ 0xc0 (em28xx #0) [ 1064.008180] tda18271 16-0060: creating new instance [ 1064.015727] TDA18271HD/C2 detected @ 16-0060 [ 1064.905095] tda18271: performing RF tracking filter calibration [ 1068.512078] tda18271: RF tracking filter calibration complete [ 1068.634254] em28xx #0: Config register raw data: 0x9b [ 1068.646228] em28xx #0: AC97 vendor ID = 0x70947094 [ 1068.652224] em28xx #0: AC97 features = 0x7094 [ 1068.652230] em28xx #0: Unknown AC97 audio processor detected! [ 1068.861285] em28xx #0: v4l2 driver version 0.1.2 [ 1069.415411] em28xx #0: V4L2 video device registered as video1 [ 1069.421162] usbcore: registered new interface driver em28xx [ 1069.421169] em28xx driver loaded [ 1069.436428] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 1069.436431] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 1069.438133] Em28xx: Initialized (Em28xx Audio Extension) extension [ 1069.560298] mb86a20s: mb86a20s_attach: [ 1069.566738] Detected a Fujitsu mb86a20s frontend [ 1069.566852] tda18271 16-0060: attaching existing instance [ 1069.566858] DVB: registering new adapter (em28xx #0) [ 1069.566863] DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... [ 1069.567506] em28xx #0: Successfully loaded em28xx-dvb [ 1069.567515] Em28xx: Initialized (Em28xx dvb Extension) extension But is not working yet, DVB scan always fail. It must be gpio settings. I got a sniffer data from win7 driver. Anybody has a tip to discover gpio settigs from data sniffed? Thanks Moa. --- On Fri, 5/27/11, Moacyr Prado <mwprado@xxxxxxxxx> wrote: > From: Moacyr Prado <mwprado@xxxxxxxxx> > Subject: Brazilian HDTV device > To: linux-media@xxxxxxxxxxxxxxx > Date: Friday, May 27, 2011, 9:20 AM > Hi, I have a board with empia > chipset. The em28xx driver not load, > because the device ID is not listed on source(cards.c, I > guess). > > Following bellow > have some infos from board: > lsusb: > Bus 001 Device 004: ID 1b80:e755 Afatech > > Opening the device, shows this ic: > > empia em2888 d351c-195 727-00ag (em28xx) > nxp saa7136e/1/g SI5296.1 22 ZSD08411 > NXP TDA 18271??C2 HDC2? (tda18271) > F JAPAN mb86a20s 0937 M01 E1 (mb86a20s) > > but... dmesg shows: > > [18373.454136] usb 6-1: USB disconnect, address 2 > [18376.744074] usb 2-1: new high speed USB device using > ehci_hcd and address 9 > [18376.860283] usb 2-1: New USB device found, > idVendor=1b80, idProduct=e755 > [18376.860293] usb 2-1: New USB device strings: Mfr=0, > Product=1, SerialNumber=2 > [18376.860300] usb 2-1: Product: USB 2885 Device > [18376.860306] usb 2-1: SerialNumber: 1 > > > Could The em28xx module (writing some code for me)handle > this device? > > Thanks, > Moa > -- > To unsubscribe from this list: send the line "unsubscribe > linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
