On Wed, 2011-06-08 at 14:18 +0300, Mehmet Altan Pire wrote: > 07-06-2011 22:34, Malcolm Priestley yazmÄÅ: > > On Tue, 2011-06-07 at 06:31 +0100, Malcolm Priestley wrote: > > > On Tue, 2011-06-07 at 02:28 +0300, Mehmet Altan Pire wrote: > > > > 06-06-2011 00:47, Malcolm Priestley yazmÄÅ: > > > > > On Sun, 2011-06-05 at 21:42 +0100, Malcolm Priestley wrote: > > > > > > On Sun, 2011-06-05 at 19:34 +0300, Mehmet Altan Pire wrote: > > > > > > > 05-06-2011 17:16, Malcolm Priestley yazmÄÅ: > > > > > > > > On Sun, 2011-06-05 at 03:35 +0300, Mehmet Altan Pire wrote: > > > > > > > > > Hi, > > > > > > > > > I have "DM04 USB DVBS TUNER", using ubuntu with v4l media-build > > > > > > > > > drivers/modules but device doesn't working (unknown device). > > > > > > > > > > > > > > > > > > lsusb message: > > > > > > > > > ID 3344:22f0 > > > > > > > > > > > > > > > > > > under of the box: > > > > > > > > > DM04P2011050176 > > > > > > > Yes, i have windows xp driver, name is "US2B0D.sys" I sending it, > > > > > > > attached in this mail. Thanks. > > > > > > Here is a modified lmedm04.c and lme2510b_fw.sh using the US2B0D.sys > > > > > > > > > > to modify the interrupt return. > > > > Ok, i tested it. Device recognized on WinXP with original driver, but tv > > > > application says "no lock". > > > > I'm not sure it worked on WinXP but driver cd is original and > > > > succesfully loaded and recognized. > > > > Again tested on ubuntu with new lmedm04.c and lme2510b_fw.sh than make, > > > > make install, and restart. > > > > > > > > lsusb says: > > > > Bus 001 Device 008: ID 3344:1120 (changes 22f0 to 1120) > > > > dmesg says: > > > Yes this should happen. The firmware will reboot with the correct id. > > > > My device different or chip is damaged? Label, box and driver cd title > > > > writes "DM04P". DM04 and DM04P different devices? > > > I think the id of the chip is faulty or default. > > > > > > I will test the firmware with LG tuner later. > > It is not the LG, s7395 or S0194 tuner. > > > > So the id is intentional. > > > > How does it identify itself in windows? > > > > > > tvboxspy > > > 3. Tests > > :WinXP Test: > > I'm sure it worked on WinXP now. Tested with ProgDVB application. > Signal, channel search and watching tv as succesfully. > My Device working without problems on WinXP and it's not damaged. > When device running on stream, green led is active, if not running, > green led is passive (red led is power led and it's always active). > Driver Info: LME_PCTV_DVBS_RS2000 "VID3344 PID22F0" 22f0 this number > correct... I need to find out what exactly the RS2000 tuner is. So currently the linux driver is not supported with your device. tvboxspy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
