Add media bus configuration types and two subdev operations to get supported mediabus configurations and to set a specific configuration. Subdevs can support several configurations, e.g., they can send video data on 1 or several lanes, can be configured to use a specific CSI-2 channel, in such cases subdevice drivers return bitmasks with all respective bits set. When a set-configuration operation is called, it has to specify a non-ambiguous configuration. Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> --- This change would allow a re-use of soc-camera and "standard" subdev drivers. It is a modified and extended version of http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/29408 therefore the original Sob. After this we only would have to switch to the control framework:) Please, comment. diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 971c7fa..0983b7b 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -13,6 +13,76 @@ #include <linux/v4l2-mediabus.h> +/* Parallel flags */ +/* Can the client run in master or in slave mode */ +#define V4L2_MBUS_MASTER (1 << 0) +#define V4L2_MBUS_SLAVE (1 << 1) +/* Which signal polarities it supports */ +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5) +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6) +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) +/* Which datawidths are supported */ +#define V4L2_MBUS_DATAWIDTH_4 (1 << 10) +#define V4L2_MBUS_DATAWIDTH_8 (1 << 11) +#define V4L2_MBUS_DATAWIDTH_9 (1 << 12) +#define V4L2_MBUS_DATAWIDTH_10 (1 << 13) +#define V4L2_MBUS_DATAWIDTH_15 (1 << 14) +#define V4L2_MBUS_DATAWIDTH_16 (1 << 15) + +#define V4L2_MBUS_DATAWIDTH_MASK (V4L2_MBUS_DATAWIDTH_4 | V4L2_MBUS_DATAWIDTH_8 | \ + V4L2_MBUS_DATAWIDTH_9 | V4L2_MBUS_DATAWIDTH_10 | \ + V4L2_MBUS_DATAWIDTH_15 | V4L2_MBUS_DATAWIDTH_16) + +/* Serial flags */ +/* How many lanes the client can use */ +#define V4L2_MBUS_CSI2_1_LANE (1 << 0) +#define V4L2_MBUS_CSI2_2_LANE (1 << 1) +#define V4L2_MBUS_CSI2_3_LANE (1 << 2) +#define V4L2_MBUS_CSI2_4_LANE (1 << 3) +/* On which channels it can send video data */ +#define V4L2_MBUS_CSI2_CHANNEL_0 (1 << 4) +#define V4L2_MBUS_CSI2_CHANNEL_1 (1 << 5) +#define V4L2_MBUS_CSI2_CHANNEL_2 (1 << 6) +#define V4L2_MBUS_CSI2_CHANNEL_3 (1 << 7) +/* Does it support only continuous or also non-contimuous clock mode */ +#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK (1 << 8) +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK (1 << 9) + +#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) +#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) + +/** + * v4l2_mbus_type - media bus type + * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync + * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation + * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface + */ +enum v4l2_mbus_type { + V4L2_MBUS_PARALLEL, + V4L2_MBUS_BT656, + V4L2_MBUS_CSI2, +}; + +/** + * v4l2_mbus_config - media bus configuration + * @type: interface type + * @flags: configuration flags, depending on @type + * @clk: output clock, the bridge driver can try to use clk_set_parent() + * to specify the master clock to the client + */ +struct v4l2_mbus_config { + enum v4l2_mbus_type type; + unsigned long flags; + struct clk *clk; +}; + static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, const struct v4l2_mbus_framefmt *mbus_fmt) { diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 1562c4f..6ea25f4 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -255,6 +255,10 @@ struct v4l2_subdev_audio_ops { try_mbus_fmt: try to set a pixel format on a video data source s_mbus_fmt: set a pixel format on a video data source + + g_mbus_param: get supported mediabus configurations + + s_mbus_param: set a certain mediabus configuration */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); @@ -294,6 +298,8 @@ struct v4l2_subdev_video_ops { struct v4l2_mbus_framefmt *fmt); int (*s_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); + int (*g_mbus_param)(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg); + int (*s_mbus_param)(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg); }; /* -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
