Em 30-03-2011 11:20, David HÃrdeman escreveu:
> The conversion of winbond-cir to use rc-core seems to have missed a
> a few bits and pieces which were in my local tree. Kudos to
> Juan JesÃs GarcÃa de Soria Lucena <skandalfo@xxxxxxxxx> for noticing.
>
> Signed-off-by: David HÃrdeman <david@xxxxxxxxxxx>
Hi David,
This patch got missed by patchwork. I'm applying it right now on my tree.
Please check if is there anything else missed.
Thanks,
Mauro.
> ---
> drivers/media/rc/winbond-cir.c | 20 +++++---------------
> 1 files changed, 5 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
> index 186de55..16f4178 100644
> --- a/drivers/media/rc/winbond-cir.c
> +++ b/drivers/media/rc/winbond-cir.c
> @@ -7,7 +7,7 @@
> * with minor modifications.
> *
> * Original Author: David Hïrdeman <david@xxxxxxxxxxx>
> - * Copyright (C) 2009 - 2010 David Hïrdeman <david@xxxxxxxxxxx>
> + * Copyright (C) 2009 - 2011 David Hïrdeman <david@xxxxxxxxxxx>
> *
> * Dedicated to my daughter Matilda, without whose loving attention this
> * driver would have been finished in half the time and with a fraction
> @@ -629,18 +629,8 @@ wbcir_init_hw(struct wbcir_data *data)
> /* prescaler 1.0, tx/rx fifo lvl 16 */
> outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
>
> - /* Set baud divisor to generate one byte per bit/cell */
> - switch (protocol) {
> - case IR_PROTOCOL_RC5:
> - outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
> - break;
> - case IR_PROTOCOL_RC6:
> - outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
> - break;
> - case IR_PROTOCOL_NEC:
> - outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
> - break;
> - }
> + /* Set baud divisor to sample every 10 us */
> + outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
> outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
>
> /* Set CEIR mode */
> @@ -649,9 +639,9 @@ wbcir_init_hw(struct wbcir_data *data)
> inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
> inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
>
> - /* Disable RX demod, run-length encoding/decoding, set freq span */
> + /* Disable RX demod, enable run-length enc/dec, set freq span */
> wbcir_select_bank(data, WBCIR_BANK_7);
> - outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
> + outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
>
> /* Disable timer */
> wbcir_select_bank(data, WBCIR_BANK_4);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
