Op 31 mei 2011, om 11:46 heeft Javier Martin het volgende geschreven:
> diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
> new file mode 100644
> index 0000000..04365b2
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
>
> +static int __init beagle_camera_init(void)
> +{
> + reg_1v8 = regulator_get(NULL, "cam_1v8");
> + if (IS_ERR(reg_1v8))
> + pr_err("%s: cannot get cam_1v8 regulator\n", __func__);
> + else
> + regulator_enable(reg_1v8);
> +
> + reg_2v8 = regulator_get(NULL, "cam_2v8");
> + if (IS_ERR(reg_2v8))
> + pr_err("%s: cannot get cam_2v8 regulator\n", __func__);
> + else
> + regulator_enable(reg_2v8);
> +
> + omap_register_i2c_bus(2, 100, NULL, 0);
> + gpio_request(MT9P031_RESET_GPIO, "cam_rst");
> + gpio_direction_output(MT9P031_RESET_GPIO, 0);
> + omap3_init_camera(&beagle_isp_platform_data);
> + return 0;
> +}
> +late_initcall(beagle_camera_init);
There should probably a if (cpu_is_omap3630()) {} wrapped around that, so the camera doesn't get initted on a 3530 beagle.
regards,
Koen--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
