Hi Ivan, On 17 May 2011 19:14, Ivan Nazarenko <ivan.nazarenko@xxxxxxxxx> wrote: > Javier, > > I have been using the aptina patch (https://github.com/Aptina/BeagleBoard-xM) on beagleboard while waiting linux-media solve this mt9p031 issue. Now that you have something working, I would like to try it - but I would like to know what is the clock rate you actually drove the sensor. > > Reviewing your path, I suppose it is 54MHz, so you would be achieving some 10 full 5MPix frames/s from the sensor. Is that correct? (the aptina patch delivers less than 4 fps). > Yes, you are right. Whereas clock rate is set to 54MHz, with my oscilloscope I have measured 57 MHz. -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
