From: Lutz Sammer <johns98@xxxxxxx> > On 05/04/11 01:16, Mauro Carvalho Chehab wrote: > > Em 13-04-2011 21:05, Lutz Sammer escreveu: > >>> On 05/04/11 21:07, Steffen Barszus wrote: > >>>> On Tue, 05 Apr 2011 13:00:14 +0200 > >>>> "Issa Gorissen" <flop.m@xxxxxxx> wrote: > >>>> > >>>>> Hi, > >>>>> > >>>>> Eutelsat made a recent migration from DVB-S to DVB-S2 (since > >>>>> 31/3/2011) on two transponders on HB13E > >>>>> > >>>>> - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500 > >>>>> Msymb/s 0.2 Pilot off Polar H > >>>>> > >>>>> - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500 > >>>>> Msymb/s 0.2 Pilot off Polar H > >>>>> > >>>>> > >>>>> Before those changes, with my TT S2 3200, I was able to watch TV on > >>>>> those transponders. Now, I cannot even tune on those transponders. I > >>>>> have tried with scan-s2 and w_scan and the latest drivers from git. > >>>>> They both find the transponders but cannot tune onto it. > >>>>> > >>>>> Something noteworthy is that my other card, a DuoFlex S2 can tune > >>>>> fine on those transponders. > >>>>> > >>>>> My question is; can someone try this as well with a TT S2 3200 and > >>>>> post the results ? > >>>> i read something about it lately here (german!): > >>>> http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938 > >>>> > >>>> It says in stb0899_drv.c function: > >>>> static void stb0899_set_iterations(struct stb0899_state *state) > >>>> > >>>> This: > >>>> reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER); > >>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); > >>>> stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); > >>>> > >>>> should be replaced with this: > >>>> > >>>> reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER); > >>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); > >>>> stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); > >>>> > >>>> Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines > >>>> affected. > >>>> > >>>> Kind Regards > >>>> > >>>> Steffen > >>> Hi Steffen, > >>> > >>> Unfortunately, it does not help in my case. Thx anyway. > >> > >> Try my locking fix. With above patch I can lock the > >> channels without problem. > > > > Can someone confirm that such patch would fix the issue? If so, please > > forward it in a way that it could be applied (patch is currently line-wrapped), > > and submit with some comments/description and your SOB. > > > > As the patch is currently broken, I'm just marking it as rejected at patchwork. > > > > Manu, > > > > Please take a look on this trouble report. > > > > Sorry, the things are mixed here. My patch (resend and hopefully this > time not broken) handles only DVB-S transponders. > > The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for > me. But I have very weak receiption, > > Johns Thank you Johns, I got out of patience and reverted back to kernel 2.6.37. Added an amplifier on the line and repositionned my dish. It works now. But very difficult to get both Hotbird 6 and 9 sats! Maybe they transmit a weak signal ??? -- Issa -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
