Hi Igor, Em 23-10-2010 07:20, Igor M. Liplianin escreveu: > Ð ÑÐÐÐÑÐÐÐÐ ÐÑ 10 ÐÐÑÑÐ 2010 14:15:49 ÐÐÑÐÑ Hendrik Skarpeid ÐÐÐÐÑÐÐ: >> Igor M. Liplianin skrev: >>> On 3 ÐÐÑÑÐ 2010 18:42:42 Hendrik Skarpeid wrote: >>>> Igor M. Liplianin wrote: >>>>> Now to find GPIO's for LNB power control and ... watch TV :) >>>> >>>> Yep. No succesful tuning at the moment. There might also be an issue >>>> with the reset signal and writing to GPIOCTR, as the module at the >>>> moment loads succesfully only once. >>>> As far as I can make out, the LNB power control is probably GPIO 16 and >>>> 17, not sure which is which, and how they work. >>>> GPIO15 is wired to tuner #reset >>> >>> New patch to test >> >> I think the LNB voltage may be a little to high on my card, 14.5V and >> 20V. I would be a little more happy if they were 14 and 19, 13 and 18 >> would be perfect. >> Anyways, as Igor pointet out, I don't have any signal from the LNB, >> checked with another tuner card. It's a quad LNB, and the other outputs >> are fine. Maybe it's' toasted from to high supply voltage! I little word >> of warning then. >> Anyways, here's my tweaked driver. > > Here is reworked patch for clear GPIO's handling. > It allows to support I2C on GPIO's and per board LNB control through GPIO's. > Also incuded support for Hendrik's card. > I think it is clear how to change and test GPIO's for LNB and other stuff now. > To Hendrik: > Not shure, but there is maybe GPIO for raise/down LNB voltage a little (~1v). > It is used for long coaxial lines to compensate voltage dropping. > > Signed-off-by: Igor M. Liplianin <liplianin@xxxxx> I'm not sure if this patch is still valid or not, and if it should or not be applied, as there were several discussions around it. As a reference, it is stored at patchwork with: X-Patchwork-Id: 279091 And still applies fine (yet, patchwork lost patch history/comments and SOB). Igor, could you please update me if I should apply this patch or if the patch got rejected/superseeded? Thanks! Mauro. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html