Hi Kalle, On Monday 02 May 2011 11:16:17 Kalle Jokiniemi wrote: > The RX-51 uses the CSIb IO complex for camera operation. The > board file is missing definition for the regulator supplying > the CSIb complex, so this is added for better power > management. > > Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx> > --- > arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++ > 1 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c > b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb677..1324ba3 > 100644 > --- a/arch/arm/mach-omap2/board-rx51-peripherals.c > +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c > @@ -337,6 +337,13 @@ static struct omap2_hsmmc_info mmc[] __initdata = { > static struct regulator_consumer_supply rx51_vmmc1_supply = > REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); > > +static struct regulator_consumer_supply rx51_vaux2_supplies[] = { > + REGULATOR_SUPPLY("vdds_csib", "omap3isp"), > + { > + .supply = "vaux2", > + }, Just for my curiosity, what is the the second consumer supply ("vaux2") for ? > +}; > + > static struct regulator_consumer_supply rx51_vaux3_supply = > REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); > > @@ -400,6 +407,8 @@ static struct regulator_init_data rx51_vaux2 = { > .valid_ops_mask = REGULATOR_CHANGE_MODE > > | REGULATOR_CHANGE_STATUS, > > }, > + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supplies), > + .consumer_supplies = rx51_vaux2_supplies, > }; > > /* VAUX3 - adds more power to VIO_18 rail */ -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html